Нет... "hsfconfig" я не запускал!
Сейчас попробую
А через их инсталлятор, как я понял, поставить не получится, потому, что там нужно соединение с интернетом:
If you already have Internet access from your Linux system, the installer will be able to download and install the right driver package for your system
Пользователь решил продолжить мысль 12 Августа 2009, 10:31:32:
О чудо!!!
Эмулятор отозвался на "hsfconfig" волшебными строками:
Conexant HSF softmodem driver, version 7.80.02.04full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
Pre-built driver modules that seem compatible with your system were found under
/usr/lib/hsfmodem/modules/binaries/linux-2.6.28-11-generic-SMP.
Would you like to use them? [yes]
После чего меня попросили выбрать страну и написать мыло, а потом ввести лицензионный ключ:
License keys can be obtained from http://www.linuxant.com/
Without one, the modem operates in FREE mode (max 14.4Kbps data only, no fax)
The registration ID for modem unit 0 is: 727F-82BB-4044
Please enter license key [FREE]: 727F-82BB-4044
ERROR: Invalid license key: "checksum error".
License keys can be obtained from http://www.linuxant.com/
Without one, the modem operates in FREE mode (max 14.4Kbps data only, no fax)
The registration ID for modem unit 0 is: 727F-82BB-4044
Please enter license key [FREE]:
Setting license for modem unit 0: "comp@bk.ru/FREE"
Note: kernel module snd-via82xx-modem overridden by hsfmc97via
Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
Current parameters: ("hsfconfig --info")
Config for modem unit 0: /dev/ttySHSF0
Device instance: 0-PCI-14f1:2f00-14f1:2004
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: hsfpcibasic2hsfi
Registration ID: 727F-82BB-4044
License owner : comp@bk.ru
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : UZBEKISTAN* (T.35 code: 00EB)
The /dev/modem alias (symlink) points to ttySHSF0
To enable full 56K modem and FAX functionality, enter your license information
with "hsfconfig --license".
License owner and key data must EXACTLY match the information respectively
provided to and by Linuxant. Otherwise, license status will remain "FREE"!
Ответ на "sudo wvdialconf" поверг меня в состояние экстаза!!!
:
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Modem Port Scan<*1>: S1 S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5
Modem Port Scan<*1>: SHSF6 SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
Покопавшись в "sudo gedit /etc/wvdial.conf", я вписал номер дозвона, логин и пароль и сохранился, после чего кинул в терминал: "wvdial", на что получил вот это:
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT2995656
--> Waiting for carrier.
ATDT2995656
CONNECT 460800
User Access Verification
Username:
--> Carrier detected. Waiting for prompt.
Username:
--> Looks like a login prompt.
--> Sending: uxor86
uxor86
Password:
--> Looks like a password prompt.
--> Sending: (password)
% Authentication failed.
Username:
--> Looks like a login prompt.
--> Sending: uxor86
uxor86
Password:
--> Looks like a password prompt.
--> Sending: (password)
% Authentication failed.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT2995656
--> Waiting for carrier.
NO CARRIER
ATDT2995656
--> No Carrier! Trying again.
--> Sending: ATDT2995656
--> Waiting for carrier.
OK
ATDT2995656
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT2995656
--> Waiting for carrier.
ATDT2995656
А потом терминал сошел с ума и начал быстро набирать обороты, печатая дикое количество непонятных мне строк и терминов, но я вот выхватил кое-что:
--> Don't know what to do! Starting pppd and hoping for the best.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.
Я еще никогда не был так близок к успеху!
Но что случилось?
Нич-чего не понимаю
Тема: Как настроить диалап в убунте 9.04? Скрин с ругательствами внутри! (Прочитано 9180 раз)
