Помогите настроить спутниковый интернет

[Упс]

Если не ошибаюсь dvb-utils так раньше назывлся пакет, теперь dvb-apps.
В обоих пакетах например есть утилита szap, из dvb-apps она ставится в /usr/bin, а из dvb-utils вроде как туда же, посмотри что куда стало.

может, для мотора прописываются какие-то другие параметры channels.conf

Спроси у гугла, у меня мотора нет, только дисек.
И на всякий случай покажи lspci -k.

[satstranger]

Спроси у гугла, у меня мотора нет, только дисек.

спрашивал - не нашел...
так, че - удалить utils?
вечером отпишусь, как че...

[Упс]

Да удали.

[satstranger]

удалил утилсы

Код: [Выделить]

root@stranger-desktop:/home/stranger#  szap -c /etc/channels.conf -n 1 > /dev/null &
[1] 3829
root@stranger-desktop:/home/stranger# femon
FE: Conexant CX24123/CX24109 (DVBS)
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |
Problem retrieving frontend information: Operation not supported
status       | signal 7f00 | snr 0000 | ber 00000000 | unc 00000000 |

Код: [Выделить]

root@stranger-desktop:/home/stranger# lspci -k
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
Kernel driver in use: ehci_hcd
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
Kernel driver in use: pata_amd
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
Kernel driver in use: sata_nv
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
Kernel driver in use: sata_nv
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Kernel driver in use: k8temp
Kernel modules: k8temp
01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev c0)
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
Kernel driver in use: b2c2_flexcop_pci
Kernel modules: b2c2-flexcop-pci
05:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series
05:00.1 Audio device: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel


[dorad9]

в channels.conf тока дисек светится. а мотором рулить софтом, типа каффеина. работало без проблем.

[Упс]

Последнее время такие проблемы когда дрова на dvb-s2 криво ставят.
А что там dmesg показывает, только в spoiler положи.
А на что заругается szap -c /etc/channels.conf -n1 -x?

[satstranger]

в спойлеры не влезло - смотри файл
ps как бы их прямо поставить... 

[Упс]

Строка 387, я бы макадрес убрал.

Код: [Выделить]

b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: CX24113 could NOT be attached
Выделяй срочку, копируй в поиск гугля.
Получиш что-то вроде этого

P.S Утебя тоже Sky2PC/SkyStar 2 DVB-S rev 2.8.

[satstranger]

обновился до 9.10 все равно не лочит сигнал, хотя тех записей уже нет, см. файлег...

[Упс]

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
opening frontend failed: Device or resource busy

После каждой команды szap делаеш killall szap?

[satstranger]

(Нажмите, чтобы показать/скрыть)

root@stranger-desktop:/home/stranger# killall szap
szap: no process found
root@stranger-desktop:/home/stranger# szap -c /etc/channels.conf -n 1 -xreading channels from file '/etc/channels.conf'
zapping to 1 'satgate':
sat 0, frequency = 11797 MHz H, symbolrate 27500000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 1d00 | snr ce50 | ber 00000000 | unc fffffffe |
status 01 | signal 1800 | snr a39c | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a221 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a2d1 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a3c1 | ber 00000000 | unc fffffffe |
status 01 | signal 1800 | snr a325 | ber 00000000 | unc fffffffe |
status 01 | signal 1800 | snr a2bb | ber 00000000 | unc fffffffe |
status 01 | signal 1800 | snr a449 | ber 00000000 | unc fffffffe |
status 01 | signal 1800 | snr a20e | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a396 | ber 00000000 | unc fffffffe |
root@stranger-desktop:/home/stranger# femon
FE: Conexant CX24123/CX24109 (DVBS)
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a296 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a32a | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a27c | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a39c | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a2a3 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a2e5 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a338 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a31d | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a2ea | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a3ed | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a2cf | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1900 | snr a2e5 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a398 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a454 | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a26b | ber 00000000 | unc 25f9e678 |
Problem retrieving frontend information: Operation not supported
status S     | signal 1800 | snr a377 | ber 00000000

[Упс]

Femon есть смысл запускать если вывод szap отпавляеш /dev/null.
Вроде всё нормально, channels.conf написан правильно, тарелка как ты пишеш на спутник смотрит, система dvb видит, драйвер стоит, модули загружены, а не работает.
Может rp_filter отключить.

Код: [Выделить]

sudo /sbin/sysctl -w net.ipv4.conf.all.rp_filter="0"
sudo /sbin/sysctl -w net.ipv4.conf.default.rp_filter="0"


[satstranger]

че это значит - я хз

(Нажмите, чтобы показать/скрыть)

[sudo] password for stranger:
root@stranger-desktop:/home/stranger# sudo /sbin/sysctl -w net.ipv4.conf.all.rp_filter="0"
net.ipv4.conf.all.rp_filter = 0
root@stranger-desktop:/home/stranger# sudo /sbin/sysctl -w net.ipv4.conf.default.rp_filter="0"
net.ipv4.conf.default.rp_filter = 0
root@stranger-desktop:/home/stranger# femon
FE: Conexant CX24123/CX24109 (DVBS)
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal ff00 | snr ff76 | ber 00000000 | unc e51efca8 |
Problem retrieving frontend information: Operation not supported
status S     | signal 0000 | snr ff76 | ber 00000000 | unc e51efca8 |
^C
root@stranger-desktop:/home/stranger# sudo /sbin/sysctl -w net.ipv4.conf.all.rp_filter="0"
net.ipv4.conf.all.rp_filter = 0
root@stranger-desktop:/home/stranger# sudo /sbin/sysctl -w net.ipv4.conf.default.rp_filter="0"
net.ipv4.conf.default.rp_filter = 0
root@stranger-desktop:/home/stranger# szap -c /etc/channels.conf -n1 -x
reading channels from file '/etc/channels.conf'
zapping to 1 'satgate':
sat 0, frequency = 11797 MHz H, symbolrate 27500000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 1d00 | snr a8e2 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr 9fe3 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a2e3 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a2fd | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a382 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a219 | ber 00000000 | unc fffffffe |
status 01 | signal 1600 | snr a51b | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a5e1 | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a00d | ber 00000000 | unc fffffffe |
status 01 | signal 1900 | snr a272 | ber 00000000 | unc fffffffe |

[Упс]

Если бы я знал. Отключение rp_filter это так, хватаемся за соломинку.
Должно быть так:

Код: [Выделить]

sudo szap -H -c  /etc/channels.conf -n1 -x
reading channels from file '/etc/channels.conf'
zapping to 1 'raduga':
sat 0, frequency = 11595 MHz V, symbolrate 29270000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal  63% | snr   3% | ber 0 | unc 0 |
status 1f | signal  63% | snr  86% | ber 0 | unc 0 | FE_HAS_LOCKЖелания поменять на dvb-s2 не возникало?

[satstranger]

я прошу прощения, но какая в ж..пу разница? почему у всех работает, а у меня - хрен?! *WALL*