Форум русскоязычного сообщества Ubuntu


Получить помощь и пообщаться с другими пользователями Ubuntu можно
на irc канале #ubuntu-ru в сети Freenode
и в Jabber конференции ubuntu@conference.jabber.ru

Автор Тема: Ubuntu + сетевая плата  (Прочитано 1072 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Smorodin

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
  • Ubuntu 7.04
    • Просмотр профиля
Ubuntu + сетевая плата
« : 09 Июль 2007, 21:36:33 »
Ситуация: есть системный блок. в нем мать A7N8X-X со встроенной сетевухой.
Суть: ставлю Линукс Ubuntu 7.04 - не видит сетвуху. Ставлю 100% рабочуу (работала на том же самом дистрибе, но на другом компе) D-Link - тоже не работает. Не подскажите, в какую сторону копать?
Сделать можно все, только вопрос - с кем?

Оффлайн Smorodin

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
  • Ubuntu 7.04
    • Просмотр профиля
Re: Ubuntu + сетевая плата
« Ответ #1 : 10 Июль 2007, 10:16:33 »
$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:08.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
01:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
01:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2)


$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f75c0
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff74c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2004.624 MHz processor.
[ 32.467355] Built 1 zonelists. Total pages: 130033
[ 32.467358] Kernel command line: root=UUID=56782115-b8f0-479a-b29f-0de80f128d26 ro quiet splash locale=ru_RU
[ 32.467524] mapped APIC to ffffd000 (fee00000)
[ 32.467526] mapped IOAPIC to ffffc000 (fec00000)
[ 32.467530] Enabling fast FPU save and restore... done.
[ 32.467532] Enabling unmasked SIMD FPU exception support... done.
[ 32.467541] Initializing CPU#0
[ 32.467603] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 32.471973] Console: colour VGA+ 80x25
[ 32.472278] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 32.472522] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.484044] Memory: 508480k/524224k available (1992k kernel code, 15192k reserved, 893k data, 328k init, 0k highmem)
[ 32.484054] virtual kernel memory layout:
[ 32.484055] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 32.484056] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 32.484058] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 32.484059] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 32.484060] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 32.484062] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 32.484063] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 32.484066] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.563455] Calibrating delay using timer specific routine.. 4012.31 BogoMIPS (lpj=8024627)
[ 32.563496] Security Framework v1.0.0 initialized
[ 32.563503] SELinux: Disabled at boot.
[ 32.563518] Mount-cache hash table entries: 512
[ 32.563655] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 32.563664] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 32.563666] CPU: L2 Cache: 256K (64 bytes/line)
[ 32.563669] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 32.563679] Compat vDSO mapped to ffffe000.
[ 32.563684] Remapping vsyscall page to ffffe000
[ 32.563693] Checking 'hlt' instruction... OK.
[ 32.579544] SMP alternatives: switching to UP code
[ 32.579785] Freeing SMP alternatives: 11k freed
[ 32.580026] Early unpacking initramfs... done
[ 32.883638] ACPI: Core revision 20060707
[ 32.890647] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 32.893463] CPU0: AMD Athlon™ XP 2600+ stepping 01
[ 32.893485] Total of 1 processors activated (4012.31 BogoMIPS).
[ 32.893681] ENABLING IO-APIC IRQs
[ 32.893876] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 33.038751] Brought up 1 CPUs
[ 33.038994] Booting paravirtualized kernel on bare hardware
[ 33.039067] Time: 4:02:03 Date: 06/10/107
[ 33.039101] NET: Registered protocol family 16
[ 33.039197] EISA bus registered
[ 33.039202] ACPI: bus type pci registered
[ 33.071035] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
[ 33.071037] PCI: Using configuration type 1
[ 33.071039] Setting up standard PCI resources
[ 33.083848] ACPI: Interpreter enabled
[ 33.083853] ACPI: Using IOAPIC for interrupt routing
[ 33.084445] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 33.084451] PCI: Probing PCI hardware (bus 00)
[ 33.084686] PCI: nForce2 C1 Halt Disconnect fixup
[ 33.085373] Boot video device is 0000:02:00.0
[ 33.085417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 33.129325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 33.129826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 33.130807] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 33.131087] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.131364] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 33.131640] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 33.131915] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.132192] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 33.132473] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 33.132751] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.133027] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.133311] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.133589] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.133868] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 33.134145] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 33.134424] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.134712] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.134988] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 33.135245] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 33.135491] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 33.135734] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 33.135976] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 33.136218] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 33.136541] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 33.136853] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 33.137165] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 33.137479] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 33.137791] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 33.138102] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 33.138349] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 33.138665] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 33.138978] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 33.139290] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 33.139600] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 33.142862] Linux Plug and Play Support v0.97 © Adam Belay
[ 33.142874] pnp: PnP ACPI init
[ 33.148446] pnp: PnP ACPI: found 16 devices
[ 33.148451] PnPBIOS: Disabled by ACPI PNP
[ 33.148511] PCI: Using ACPI for IRQ routing
[ 33.148518] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 33.184415] NET: Registered protocol family 8
[ 33.184417] NET: Registered protocol family 20
[ 33.185002] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 33.185005] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 33.185008] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 33.185011] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 33.185014] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 33.185016] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 33.185022] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 33.185025] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[ 33.185321] PCI: Bridge: 0000:00:08.0
[ 33.185325] IO window: d000-dfff
[ 33.185330] MEM window: eb000000-ecffffff
[ 33.185334] PREFETCH window: 30000000-300fffff
[ 33.185339] PCI: Bridge: 0000:00:1e.0
[ 33.185340] IO window: disabled.
[ 33.185344] MEM window: e8000000-eaffffff
[ 33.185347] PREFETCH window: d0000000-dfffffff
[ 33.185358] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 33.185390] NET: Registered protocol family 2
[ 33.222494] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 33.222580] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 33.222748] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 33.222837] TCP: Hash tables configured (established 16384 bind 8192)
[ 33.222839] TCP reno registered
[ 33.234524] checking if image is initramfs... it is
[ 33.811273] Freeing initrd memory: 7000k freed
[ 33.811752] audit: initializing netlink socket (disabled)
[ 33.811766] audit(1184040123.428:1): initialized
[ 33.811873] VFS: Disk quotas dquot_6.5.1
[ 33.811890] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.811940] io scheduler noop registered
[ 33.811943] io scheduler anticipatory registered
[ 33.811946] io scheduler deadline registered
[ 33.811953] io scheduler cfq registered (default)
[ 33.812216] isapnp: Scanning for PnP cards...
[ 34.166107] isapnp: No Plug & Play device found
[ 34.196690] Real Time Clock Driver v1.12ac
[ 34.196744] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.196911] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.197182] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.197914] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.198270] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.198572] mice: PS/2 mouse device common for all mice
[ 34.199119] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.199360] input: Macintosh mouse button emulation as /class/input/input0
[ 34.199393] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 34.199397] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 34.199619] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 34.199622] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 34.448971] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.449152] EISA: Probing bus 0 at eisa.0
[ 34.449174] Cannot allocate resource for EISA slot 4
[ 34.449177] Cannot allocate resource for EISA slot 5
[ 34.449192] EISA: Detected 0 cards.
[ 34.479238] TCP cubic registered
[ 34.479244] NET: Registered protocol family 1
[ 34.479266] Using IPI No-Shortcut mode
[ 34.479332] ACPI: (supports S0 S1 S4 S5)
[ 34.479381] Magic number: 15:139:9
[ 34.479895] Freeing unused kernel memory: 328k freed
[ 34.480416] Time: tsc clocksource has been installed.
[ 34.496010] input: AT Translated Set 2 keyboard as /class/input/input1
[ 35.712705] Capability LSM initialized
[ 36.252952] usbcore: registered new interface driver usbfs
[ 36.252981] usbcore: registered new interface driver hub
[ 36.253005] usbcore: registered new device driver usb
[ 36.253810] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 36.254243] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 36.254252] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 36.254266] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 36.254269] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 36.254417] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 36.254438] ohci_hcd 0000:00:02.0: irq 16, io mem 0xed000000
[ 36.311970] usb usb1: configuration #1 chosen from 1 choice
[ 36.311998] hub 1-0:1.0: USB hub found
[ 36.312011] hub 1-0:1.0: 3 ports detected
[ 36.332082] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 36.412127] Floppy drive(s): fd0 is 1.44M
[ 36.413894] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 36.413905] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 36.413921] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 36.413924] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 36.413950] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 36.413969] ohci_hcd 0000:00:02.1: irq 17, io mem 0xed001000
[ 36.474596] usb usb2: configuration #1 chosen from 1 choice
[ 36.474629] hub 2-0:1.0: USB hub found
[ 36.474642] hub 2-0:1.0: 3 ports detected
[ 36.487084] FDC 0 is a post-1991 82077
[ 36.577705] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 36.577715] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 36.577727] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 36.577731] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 36.577762] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 36.577798] ehci_hcd 0000:00:02.2: debug port 1
[ 36.577803] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 36.577814] ehci_hcd 0000:00:02.2: irq 18, io mem 0xed002000
[ 36.577821] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.577892] usb usb3: configuration #1 chosen from 1 choice
[ 36.577919] hub 3-0:1.0: USB hub found
[ 36.577929] hub 3-0:1.0: 6 ports detected
[ 36.681317] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 36.681343] NFORCE2: chipset revision 162
[ 36.681345] NFORCE2: not 100% native mode: will probe irqs later
[ 36.681350] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[ 36.681356] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 36.681366] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 36.681377] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 36.681385] Probing IDE interface ide0...
[ 36.968622] hda: WDC WD800JB-00FMA0, ATA DISK drive
[ 37.260043] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 37.468878] usb 1-2: configuration #1 chosen from 1 choice
[ 37.483611] usbcore: registered new interface driver hiddev
[ 37.493055] input: HID 1241:1166 as /class/input/input2
[ 37.493171] input: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-2
[ 37.493187] usbcore: registered new interface driver usbhid
[ 37.493191] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 37.639640] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 37.641910] Probing IDE interface ide1...
[ 38.374404] hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
[ 38.718108] ide1 at 0x170-0x177,0x376 on irq 15
[ 38.729102] SCSI subsystem initialized
[ 38.734814] libata version 2.20 loaded.
[ 38.740442] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 38.740454] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
[ 38.746023] eth0: VIA Rhine III at 0x1d000, 00:05:5d:81:cc:e3, IRQ 19.
[ 38.746755] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 38.756956] hda: max request size: 128KiB
[ 38.769135] hda: Host Protected Area detected.
[ 38.769137] current capacity is 152105071 sectors (77877 MB)
[ 38.769139] native capacity is 156301488 sectors (80026 MB)
[ 38.769271] hda: Host Protected Area disabled.
[ 38.769274] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 38.769335] hda: cache flushes supported
[ 38.769387] hda: hda1 hda2 hda3
[ 38.794115] hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 38.794125] Uniform CD-ROM driver Revision: 3.20
[ 39.031125] Attempting manual resume
[ 39.031129] swsusp: Resume From Partition 3:1
[ 39.031131] PM: Checking swsusp image.
[ 39.031311] PM: Resume from disk failed.
[ 39.055609] kjournald starting. Commit interval 5 seconds
[ 39.055622] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.836119] eth0: link down
[ 47.082980] NET: Registered protocol family 17
[ 47.952604] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 47.952649] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[ 47.963533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 47.966013] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.088815] input: PC Speaker as /class/input/input3
[ 48.232564] parport: PnPBIOS parport detected.
[ 48.232627] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 48.368661] gameport: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xd800, speed 864kHz
[ 48.384582] Linux agpgart interface v0.102 © Dave Jones
[ 48.407485] agpgart: Detected NVIDIA nForce2 chipset
[ 48.414910] agpgart: AGP aperture is 128M @ 0xe0000000
[ 49.051431] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 49.051442] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20
[ 49.295720] fuse init (API version 7.8)
[ 49.316166] lp0: using parport0 (interrupt-driven).
[ 49.349928] Adding 2000052k swap on /dev/disk/by-uuid/ad709730-5759-40f6-bb7e-0f7e0b238665. Priority:-1 extents:1 across:2000052k
[ 49.476744] EXT3 FS on hda2, internal journal
[ 49.684771] kjournald starting. Commit interval 5 seconds
[ 49.685005] EXT3 FS on hda3, internal journal
[ 49.685011] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.007791] Using specific hotkey driver
[ 55.031752] No dock devices found.
[ 55.058776] ibm_acpi: ec object not found
[ 55.147818] input: Power Button (FF) as /class/input/input4
[ 55.152433] ACPI: Power Button (FF) [PWRF]
[ 55.186914] input: Power Button (CM) as /class/input/input5
[ 55.191454] ACPI: Power Button (CM) [PWRB]
[ 55.244535] pcc_acpi: loading...
[ 60.508709] ppdev: user-space parallel port driver
[ 61.086758] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 61.086764] apm: overridden by ACPI.
[ 61.306307] Bluetooth: Core ver 2.11
[ 61.328863] NET: Registered protocol family 31
[ 61.328870] Bluetooth: HCI device and connection manager initialized
[ 61.328874] Bluetooth: HCI socket layer initialized
[ 61.338715] Bluetooth: L2CAP ver 2.8
[ 61.338720] Bluetooth: L2CAP socket layer initialized
[ 61.393162] Bluetooth: RFCOMM socket layer initialized
[ 61.393459] Bluetooth: RFCOMM TTY layer initialized
[ 61.393463] Bluetooth: RFCOMM ver 1.8
[ 85.966053] NET: Registered protocol family 10
[ 85.966150] lo: Disabled Privacy Extensions
[ 85.966218] ADDRCONF(NETDEV_UP): eth0: link is not ready
Сделать можно все, только вопрос - с кем?

Оффлайн LP Fan

  • Новичок
  • *
  • Сообщений: 13
  • Linkin Park Fan
    • Просмотр профиля
Re: Ubuntu + сетевая плата
« Ответ #2 : 10 Июль 2007, 10:57:32 »
а что ifconfig говорит ?
I wanna run away
Never say goodbye
I wanna know the truth Instead of wondering why ...

Оффлайн Smorodin

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
  • Ubuntu 7.04
    • Просмотр профиля
Re: Ubuntu + сетевая плата
« Ответ #3 : 10 Июль 2007, 12:30:02 »
ifconfig говорит только интерфейс lo.
а вообще, я вот щас опять его включил - и все заработало :)

но честное слово, оно не работало.
В чем могла быть проблема? :)
Сделать можно все, только вопрос - с кем?

Оффлайн LP Fan

  • Новичок
  • *
  • Сообщений: 13
  • Linkin Park Fan
    • Просмотр профиля
Re: Ubuntu + сетевая плата
« Ответ #4 : 10 Июль 2007, 14:57:02 »
проблема в том что "оно" живет своей жизню ))
I wanna run away
Never say goodbye
I wanna know the truth Instead of wondering why ...

 

Страница сгенерирована за 0.059 секунд. Запросов: 22.