Форум русскоязычного сообщества Ubuntu


Автор Тема: Настройка звука на ноутбуке ASUS F3Sr [решена]  (Прочитано 3996 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Стоит  Ubuntu 7.10
С убунтой работаю впервые а вообще на линуксе работаю 3 года! Купил ноут и всё вроде настроил кроме модема и звука. Модем полбеды потом разберусь а вот без звука скучно!

Звуковая стоит intel-hda  под винду ставятся дрова от Realtek. Пробывал уже всё что можно из описанного в форуме но ни в какую не работает.
вывод команд
 lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 94c9
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
09:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

lsmod:
Module                  Size  Used by
rfcomm                 42136  2
l2cap                  26240  11 rfcomm
bluetooth              57060  4 rfcomm,l2cap
nfsd                  220912  13
exportfs                7040  1 nfsd
ppdev                  10244  0
acpi_cpufreq           10568  1
cpufreq_powersave       2688  0
cpufreq_stats           7232  0
cpufreq_userspace       5280  0
cpufreq_ondemand        9612  1
cpufreq_conservative     8072  0
freq_table              5792  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
video                  18060  0
battery                11012  0
container               5504  0
sbs                    19592  0
button                  8976  0
dock                   10656  0
ac                      6148  0
asus_acpi              17308  0
ipv6                  273892  10
nfs                   245868  1
lockd                  67592  3 nfsd,nfs
sunrpc                172412  10 nfsd,nfs,lockd
sbp2                   24072  0
parport_pc             37412  0
lp                     12580  0
parport                37448  3 ppdev,parport_pc,lp
snd_hda_intel         293792  1
snd_pcm_oss            43008  0
snd_mixer_oss          17920  1 snd_pcm_oss
joydev                 11328  0
snd_pcm                80644  2 snd_hda_intel,snd_pcm_oss
snd_page_alloc         11656  2 snd_hda_intel,snd_pcm
snd_hwdep              10628  1 snd_hda_intel
sr_mod                 17828  0
ipw3945               119840  1
snd_seq_oss            35328  0
atl1                   36108  0
snd_seq_midi_event      8704  1 snd_seq_oss
cdrom                  37536  1 sr_mod
ieee80211              35656  1 ipw3945
uvcvideo               48644  0
mii                     6528  1 atl1
fglrx                1487340  22
snd_seq                54256  4 snd_seq_oss,snd_seq_midi_event
compat_ioctl32          2304  1 uvcvideo
ieee80211_crypt         7040  1 ieee80211
snd_timer              24580  2 snd_pcm,snd_seq
snd_seq_device          9740  2 snd_seq_oss,snd_seq
pcspkr                  4224  0
psmouse                39952  0
serio_raw               8068  0
sdhci                  18828  0
mmc_core               28420  1 sdhci
videodev               29312  1 uvcvideo
v4l1_compat            15364  2 uvcvideo,videodev
v4l2_common            18432  2 uvcvideo,videodev
snd                    56708  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
shpchp                 34580  0
pci_hotplug            32704  1 shpchp
intel_agp              25620  0
agpgart                35016  2 fglrx,intel_agp
soundcore               8800  1 snd
evdev                  11136  5
reiserfs              248704  1
ata_piix               17540  0
sg                     36764  0
sd_mod                 30336  5
usb_storage            73024  0
ide_core              116804  1 usb_storage
libusual               18448  1 usb_storage
usbhid                 29536  0
hid                    28928  1 usbhid
ata_generic             8452  0
ohci1394               36528  0
ieee1394               96312  2 sbp2,ohci1394
ahci                   23300  4
libata                125168  3 ata_piix,ata_generic,ahci
scsi_mod              147084  6 sbp2,sr_mod,sg,sd_mod,usb_storage,libata
ehci_hcd               36492  0
uhci_hcd               26640  0
usbcore               138632  7 uvcvideo,usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd
thermal                14344  0
processor              32072  2 acpi_cpufreq,thermal
fan                     5764  0
fuse                   47124  5
apparmor               40728  0
commoncap               8320  1 apparmor

dmesg:
[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12
GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 524192) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524192
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524192
[    0.000000] On node 0 totalpages: 524192
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2303 pages used for memmap
[    0.000000]   HighMem zone: 292513 pages, LIFO batch:31
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F81F0 checksum 0
[    0.000000] ACPI: RSDP 000F81F0, 0024 (r2 ACPIAM)
[    0.000000] ACPI: XSDT 7FFA0100, 007C (r1 _ASUS_ Notebook  9000703 MSFT       97)
[    0.000000] ACPI: FACP 7FFA0290, 00F4 (r3 A_M_I_ OEMFACP   9000703 MSFT       97)
[    0.000000] ACPI: DSDT 7FFA0680, AF5B (r1  F3Sr1 F3Sr1102      102 INTL 20051117)
[    0.000000] ACPI: FACS 7FFAE000, 0040
[    0.000000] ACPI: APIC 7FFA0390, 005C (r1 A_M_I_ OEMAPIC   9000703 MSFT       97)
[    0.000000] ACPI: MCFG 7FFA0430, 003C (r1 A_M_I_ OEMMCFG   9000703 MSFT       97)
[    0.000000] ACPI: SLIC 7FFA0470, 0176 (r1 _ASUS_ Notebook  9000703 MSFT       97)
[    0.000000] ACPI: DBGP 7FFA03F0, 0034 (r1 A_M_I_ OEMDBGP   9000703 MSFT       97)
[    0.000000] ACPI: BOOT 7FFA05F0, 0028 (r1 A_M_I_ OEMBOOT   9000703 MSFT       97)
[    0.000000] ACPI: ECDT 7FFA0620, 0054 (r1 A_M_I_ OEMECDT   9000703 MSFT       97)
[    0.000000] ACPI: OEMB 7FFAE040, 0060 (r1 A_M_I_ AMI_OEM   9000703 MSFT       97)
[    0.000000] ACPI: HPET 7FFAB5E0, 0038 (r1 A_M_I_ OEMHPET   9000703 MSFT       97)
[    0.000000] ACPI: ATKG 7FFAE2A0, 8024 (r1 A_M_I_  OEMATKG  5000702 MSFT       97)
[    0.000000] ACPI: SSDT 7FFB6CC0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[    0.000000] Built 1 zonelists.  Total pages: 520097
[    0.000000] Kernel command line: root=UUID=b3fd8fd6-cfbb-4383-9422-95fc1c7e04cf ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1995.036 MHz processor.
[   20.705983] Console: colour VGA+ 80x25
[   20.706255] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   20.706527] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.784442] Memory: 2067080k/2096768k available (2015k kernel code, 28456k reserved, 916k data, 364k init, 1179264k highmem)
[   20.784449] virtual kernel memory layout:
[   20.784450]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   20.784451]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.784452]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   20.784453]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   20.784454]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   20.784455]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   20.784456]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   20.784459] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.784489] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   20.784611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   20.784615] hpet0: 3 64-bit timers, 14318180 Hz
[   20.865585] Calibrating delay using timer specific routine.. 3993.06 BogoMIPS (lpj=7986120)
[   20.865604] Security Framework v1.0.0 initialized
[   20.865609] SELinux:  Disabled at boot.
[   20.865620] Mount-cache hash table entries: 512
[   20.865727] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   20.865734] monitor/mwait feature present.
[   20.865736] using mwait in idle threads.
[   20.865740] CPU: L1 I cache: 32K, L1 D cache: 32K
[   20.865742] CPU: L2 cache: 4096K
[   20.865744] CPU: Physical Processor ID: 0
[   20.865745] CPU: Processor Core ID: 0
[   20.865747] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   20.865755] Compat vDSO mapped to ffffe000.
[   20.865766] Checking 'hlt' instruction... OK.
[   20.881665] SMP alternatives: switching to UP code
[   20.882022] Early unpacking initramfs... done
[   21.167835] ACPI: Core revision 20070126
[   21.167886] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.223604] CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
[   21.223617] SMP alternatives: switching to SMP code
[   21.223678] Booting processor 1/1 eip 3000
[   21.234092] Initializing CPU#1
[   21.313330] Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=7980016)
[   21.313335] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   21.313340] monitor/mwait feature present.
[   21.313342] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.313344] CPU: L2 cache: 4096K
[   21.313345] CPU: Physical Processor ID: 0
[   21.313347] CPU: Processor Core ID: 1
[   21.313348] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   21.314050] CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
[   21.314069] Total of 2 processors activated (7983.06 BogoMIPS).
[   21.314214] ENABLING IO-APIC IRQs
[   21.314389] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.461323] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   21.481324] Brought up 2 CPUs
[   21.597176] migration_cost=31
[   21.597286] Booting paravirtualized kernel on bare hardware
[   21.597351] Time: 16:50:23  Date: 10/20/107
[   21.597367] NET: Registered protocol family 16
[   21.597434] EISA bus registered
[   21.597437] ACPI: bus type pci registered
[   21.597572] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
[   21.597574] PCI: Using configuration type 1
[   21.597575] Setting up standard PCI resources
[   21.600917] ACPI: EC: Found ECDT
[   21.621437] ACPI: Interpreter enabled
[   21.621440] ACPI: (supports S0 S1 S3 S4 S5)
[   21.621459] ACPI: Using IOAPIC for interrupt routing
[   21.623013] Error attaching device data
[   21.623046] Error attaching device data
[   21.631328] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[   21.631463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.631482] PCI: Probing PCI hardware (bus 00)
[   21.633446] PCI: Transparent bridge - 0000:00:1e.0
[   21.633539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.633733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   21.633843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   21.633952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   21.634059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   21.634171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   21.634285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   21.634416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   21.634529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   21.654660] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[   21.654819] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
[   21.654975] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[   21.655130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
[   21.655912] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[   21.656064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
[   21.656219] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
[   21.656374] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[   21.656494] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.656502] pnp: PnP ACPI init
[   21.656508] ACPI: bus type pnp registered
[   21.658847] pnp: PnP ACPI: found 13 devices
[   21.658849] ACPI: ACPI bus type pnp unregistered
[   21.658852] PnPBIOS: Disabled by ACPI PNP
[   21.658887] PCI: Using ACPI for IRQ routing
[   21.658889] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.679499] NET: Registered protocol family 8
[   21.679500] NET: Registered protocol family 20
[   21.679540] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[   21.679548] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   21.679550] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[   21.679553] pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[   21.679556] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[   21.679560] pnp: 00:0a: ioport range 0x250-0x253 has been reserved
[   21.679562] pnp: 00:0a: ioport range 0x256-0x25f has been reserved
[   21.679565] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[   21.679568] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[   21.679572] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   21.679576] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   21.679579] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[   21.679581] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   21.679584] pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
[   21.681128] Time: tsc clocksource has been installed.
[   21.681135] Switched to high resolution mode on CPU 0
[   21.681209] Switched to high resolution mode on CPU 1
[   21.709823] PCI: Bridge: 0000:00:01.0
[   21.709826]   IO window: 8000-afff
[   21.709829]   MEM window: fde00000-fdefffff
[   21.709832]   PREFETCH window: bdf00000-ddefffff
[   21.709835] PCI: Bridge: 0000:00:1c.0
[   21.709837]   IO window: disabled.
[   21.709841]   MEM window: fdf00000-fdffffff
[   21.709844]   PREFETCH window: disabled.
[   21.709848] PCI: Bridge: 0000:00:1c.1
[   21.709850]   IO window: disabled.
[   21.709854]   MEM window: fe000000-fe0fffff
[   21.709857]   PREFETCH window: disabled.
[   21.709861] PCI: Bridge: 0000:00:1c.2
[   21.709864]   IO window: b000-bfff
[   21.709868]   MEM window: fe100000-fe1fffff
[   21.709871]   PREFETCH window: disabled.
[   21.709875] PCI: Bridge: 0000:00:1c.3
[   21.709877]   IO window: disabled.
[   21.709881]   MEM window: disabled.
[   21.709884]   PREFETCH window: disabled.
[   21.709888] PCI: Bridge: 0000:00:1c.4
[   21.709890]   IO window: c000-cfff
[   21.709895]   MEM window: fe200000-fe9fffff
[   21.709898]   PREFETCH window: ddf00000-dfefffff
[   21.709902] PCI: Bridge: 0000:00:1c.5
[   21.709904]   IO window: disabled.
[   21.709908]   MEM window: disabled.
[   21.709911]   PREFETCH window: disabled.
[   21.709915] PCI: Bridge: 0000:00:1e.0
[   21.709916]   IO window: disabled.
[   21.709921]   MEM window: fea00000-feafffff
[   21.709924]   PREFETCH window: disabled.
[   21.709937] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   21.709942] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   21.709957] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   21.709962] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   21.709978] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[   21.709983] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   21.710000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   21.710004] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   21.710021] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   21.710025] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   21.710041] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   21.710045] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   21.710061] ACPI: PCI Interrupt 0000:00:1c.5 -> GSI 17 (level, low) -> IRQ 17
[   21.710065] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   21.710075] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   21.710083] NET: Registered protocol family 2
[   21.761063] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.761109] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   21.761631] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   21.761807] TCP: Hash tables configured (established 131072 bind 65536)
[   21.761809] TCP reno registered
[   21.777134] checking if image is initramfs... it is
[   22.340191] Freeing initrd memory: 7333k freed
[   22.340286] Simple Boot Flag at 0x52 set to 0x1
[   22.340668] audit: initializing netlink socket (disabled)
[   22.340678] audit(1195577423.208:1): initialized
[   22.340767] highmem bounce pool size: 64 pages
[   22.342257] VFS: Disk quotas dquot_6.5.1
[   22.342296] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.342366] io scheduler noop registered
[   22.342367] io scheduler anticipatory registered
[   22.342369] io scheduler deadline registered
[   22.342380] io scheduler cfq registered (default)
[   22.454708] Boot video device is 0000:01:00.0
[   22.454782] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.454816] assign_interrupt_mode Found MSI capability
[   22.454819] Allocate Port Service[0000:00:01.0:pcie00]
[   22.454844] Allocate Port Service[0000:00:01.0:pcie02]
[   22.454907] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.454946] assign_interrupt_mode Found MSI capability
[   22.454947] Allocate Port Service[0000:00:1c.0:pcie00]
[   22.455018] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.455056] assign_interrupt_mode Found MSI capability
[   22.455058] Allocate Port Service[0000:00:1c.1:pcie00]
[   22.455128] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   22.455166] assign_interrupt_mode Found MSI capability
[   22.455168] Allocate Port Service[0000:00:1c.2:pcie00]
[   22.455238] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   22.455276] assign_interrupt_mode Found MSI capability
[   22.455278] Allocate Port Service[0000:00:1c.3:pcie00]
[   22.455349] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   22.455388] assign_interrupt_mode Found MSI capability
[   22.455390] Allocate Port Service[0000:00:1c.4:pcie00]
[   22.455413] Allocate Port Service[0000:00:1c.4:pcie02]
[   22.455484] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   22.455523] assign_interrupt_mode Found MSI capability
[   22.455524] Allocate Port Service[0000:00:1c.5:pcie00]
[   22.455548] Allocate Port Service[0000:00:1c.5:pcie02]
[   22.455670] isapnp: Scanning for PnP cards...
[   22.808508] isapnp: No Plug & Play device found
[   22.824578] Real Time Clock Driver v1.12ac
[   22.824743] hpet_resources: 0xfed00000 is busy
[   22.824790] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.825670] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.825771] input: Macintosh mouse button emulation as /class/input/input0
[   22.825834] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   22.827691] i8042.c: Detected active multiplexing controller, rev 1.1.
[   22.828504] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.828508] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   22.828511] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   22.828513] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   22.828515] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   22.828602] mice: PS/2 mouse device common for all mice
[   22.828690] EISA: Probing bus 0 at eisa.0
[   22.828718] Cannot allocate resource for EISA slot 8
[   22.828719] EISA: Detected 0 cards.
[   22.828854] TCP cubic registered
[   22.828865] NET: Registered protocol family 1
[   22.828882] Using IPI No-Shortcut mode
[   22.829026]   Magic number: 15:19:844
[   22.829061]   hash matches device ptyrd
[   22.829253] Freeing unused kernel memory: 364k freed
[   22.968168] input: AT Translated Set 2 keyboard as /class/input/input1
[   23.995884] AppArmor: AppArmor initialized<5>audit(1195577424.708:2):  type=1505 info="AppArmor initialized" pid=1265
[   24.004415] fuse init (API version 7.8)
[   24.011000] Failure registering capabilities with primary security module.
[   24.042549] ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] -  F1, should be 59 [20070126]
[   24.042555] ACPI: SSDT 7FFB63A0, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[   24.042809] ACPI: SSDT 7FFB66C0, 05F1 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[   24.055716] Monitor-Mwait will be used to enter C-1 state
[   24.055719] Monitor-Mwait will be used to enter C-2 state
[   24.055722] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   24.055726] ACPI: Processor [P001] (supports 8 throttling states)
[   24.055941] ACPI: SSDT 7FFB62D0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
[   24.056184] ACPI: SSDT 7FFB6630, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[   24.071708] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   24.071712] ACPI: Processor [P002] (supports 8 throttling states)
[   24.077451] ACPI: Thermal Zone [THRM] (57 C)
« Последнее редактирование: 22 Ноябрь 2007, 18:27:51 от R.M.I. »

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #1 : 20 Ноябрь 2007, 17:31:58 »
[    3.120000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.124000] Time: hpet clocksource has been installed.
[    3.484000] usbcore: registered new interface driver usbfs
[    3.484000] usbcore: registered new interface driver hub
[    3.484000] usbcore: registered new device driver usb
[    3.484000] USB Universal Host Controller Interface driver v3.0
[    3.484000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    3.484000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    3.484000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.484000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.484000] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[    3.484000] usb usb1: configuration #1 chosen from 1 choice
[    3.484000] hub 1-0:1.0: USB hub found
[    3.484000] hub 1-0:1.0: 2 ports detected
[    3.576000] SCSI subsystem initialized
[    3.580000] libata version 2.21 loaded.
[    3.588000] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 20
[    3.588000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    3.588000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.588000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    3.588000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000e000
[    3.588000] usb usb2: configuration #1 chosen from 1 choice
[    3.588000] hub 2-0:1.0: USB hub found
[    3.588000] hub 2-0:1.0: 2 ports detected
[    3.692000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[    3.692000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.692000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.692000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.692000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc00
[    3.692000] usb usb3: configuration #1 chosen from 1 choice
[    3.692000] hub 3-0:1.0: USB hub found
[    3.692000] hub 3-0:1.0: 2 ports detected
[    3.796000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[    3.796000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.796000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.796000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    3.796000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[    3.796000] usb usb4: configuration #1 chosen from 1 choice
[    3.796000] hub 4-0:1.0: USB hub found
[    3.796000] hub 4-0:1.0: 2 ports detected
[    3.828000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    3.900000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.900000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.900000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.900000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    3.900000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    3.900000] usb usb5: configuration #1 chosen from 1 choice
[    3.900000] hub 5-0:1.0: USB hub found
[    3.900000] hub 5-0:1.0: 2 ports detected
[    4.004000] ahci 0000:00:1f.2: version 2.2
[    4.004000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 20 (level, low) -> IRQ 22
[    4.024000] usb 1-2: configuration #1 chosen from 1 choice
[    4.276000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    4.448000] usb 3-1: configuration #1 chosen from 1 choice
[    4.692000] usb 3-2: new full speed USB device using uhci_hcd and address 3
[    4.872000] usb 3-2: configuration #1 chosen from 1 choice
[    4.876000] usbcore: registered new interface driver hiddev
[    4.892000] input: Logitech Optical USB Mouse as /class/input/input2
[    4.892000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[    4.892000] usbcore: registered new interface driver usbhid
[    4.892000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    4.892000] usbcore: registered new interface driver libusual
[    4.896000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    4.896000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    4.896000] Initializing USB Mass Storage driver...
[    4.896000] scsi0 : SCSI emulation for USB Mass Storage devices
[    4.896000] usb-storage: device found at 3
[    4.896000] usb-storage: waiting for device to settle before scanning
[    4.896000] usbcore: registered new interface driver usb-storage
[    4.896000] USB Mass Storage support registered.
[    5.008000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    5.008000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    5.008000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.008000] scsi1 : ahci
[    5.008000] scsi2 : ahci
[    5.008000] scsi3 : ahci
[    5.008000] ata1: SATA max UDMA/133 cmd 0xf882e900 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.008000] ata2: SATA max UDMA/133 cmd 0xf882e980 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.008000] ata3: SATA max UDMA/133 cmd 0xf882ea00 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.492000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.492000] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    5.492000] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.492000] ata1.00: configured for UDMA/133
[    5.804000] ata2: SATA link down (SStatus 0 SControl 300)
[    6.116000] ata3: SATA link down (SStatus 0 SControl 300)
[    6.120000] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    6.120000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    6.120000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    6.120000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    6.120000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.120000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    6.120000] ehci_hcd 0000:00:1a.7: debug port 1
[    6.120000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    6.120000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[    6.124000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.124000] usb usb6: configuration #1 chosen from 1 choice
[    6.124000] hub 6-0:1.0: USB hub found
[    6.124000] hub 6-0:1.0: 4 ports detected
[    6.492000] usb 6-2: new high speed USB device using ehci_hcd and address 2
[    6.636000] usb 6-2: configuration #1 chosen from 1 choice
[    6.636000] usb 1-2: USB disconnect, address 2
[    7.124000] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    7.124000] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    7.124000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[    7.124000] scsi4 : ahci
[    7.124000] ata4: SATA max UDMA/133 cmd 0xf8888100 ctl 0x00000000 bmdma 0x00000000 irq 18
[    7.436000] ata4: SATA link down (SStatus 0 SControl 300)
[    7.436000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[    7.436000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    7.436000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    7.436000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    7.436000] ehci_hcd 0000:00:1d.7: debug port 1
[    7.436000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    7.436000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebff000
[    7.440000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    7.440000] usb usb7: configuration #1 chosen from 1 choice
[    7.440000] hub 7-0:1.0: USB hub found
[    7.440000] hub 7-0:1.0: 6 ports detected
[    7.444000] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    7.444000] sd 1:0:0:0: [sda] Write Protect is off
[    7.444000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.444000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.444000] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    7.444000] sd 1:0:0:0: [sda] Write Protect is off
[    7.444000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.444000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.444000]  sda: sda1 sda2 sda3 sda4
[    7.492000] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.496000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.548000] ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    7.600000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    7.604000] ata_piix 0000:00:1f.1: version 2.11
[    7.604000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    7.604000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    7.604000] scsi5 : ata_piix
[    7.604000] scsi6 : ata_piix
[    7.604000] ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[    7.604000] ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[    7.820000] Attempting manual resume
[    7.820000] swsusp: Resume From Partition 8:4
[    7.820000] PM: Checking swsusp image.
[    7.820000] PM: Resume from disk failed.
[    7.828000] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[    7.828000] ReiserFS: sda3: using ordered data mode
[    7.844000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max tran
s age 30
[    7.848000] ReiserFS: sda3: checking transaction log (sda3)
[    7.880000] ReiserFS: sda3: Using r5 hash to sort names
[    7.924000] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.22, max UDMA/33
[    7.988000] usb 3-1: USB disconnect, address 2
[    8.096000] ata5.00: configured for UDMA/33
[    8.096000] ata6: port disabled. ignoring.
[    8.096000] scsi 5:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.22 PQ: 0 ANSI: 5
[    8.096000] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[    8.228000] usb 3-1: new low speed USB device using uhci_hcd and address 4
[    8.400000] usb 3-1: configuration #1 chosen from 1 choice
[    8.416000] input: Logitech Optical USB Mouse as /class/input/input3
[    8.416000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[    8.416000] usb 3-2: USB disconnect, address 3
[    8.656000] usb 3-2: new full speed USB device using uhci_hcd and address 5
[    8.836000] usb 3-2: configuration #1 chosen from 1 choice
[    8.840000] scsi7 : SCSI emulation for USB Mass Storage devices
[    8.840000] usb-storage: device found at 5
[    8.840000] usb-storage: waiting for device to settle before scanning
[    8.876000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800039fe922]
[   13.840000] usb-storage: device scan complete
[   13.904000] scsi 7:0:0:0: Direct-Access     NEC      USB UF000x       1.50 PQ: 0 ANSI: 0 CCS
[   14.224000] Linux agpgart interface v0.102 (c) Dave Jones
[   14.324000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.372000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.476000] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[   14.476000] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   14.704000] Linux video capture interface: v2.00
[   14.740000] sdhci: Secure Digital Host Controller Interface driver
[   14.740000] sdhci: Copyright(c) Pierre Ossman
[   14.740000] sdhci: SDHCI controller found at 0000:09:01.1 [1180:0822] (rev 22)
[   14.740000] ACPI: PCI Interrupt 0000:09:01.1 -> GSI 17 (level, low) -> IRQ 17
[   14.740000] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
[   14.792000] input: PC Speaker as /class/input/input4
[   14.864000] ieee80211_crypt: registered algorithm 'NULL'
[   15.060000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   15.076000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[   15.076000] [fglrx] ASYNCIO init succeed!
[   15.080000] [fglrx] PAT is enabled successfully!
[   15.080000] [fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0
[   15.112000] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
[   15.112000] usbcore: registered new interface driver uvcvideo
[   15.112000] USB Video Class driver (v0.1.0)
[   15.132000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   15.132000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   15.196000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.196000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   15.196000] atl1 0000:02:00.0: version 2.0.7
[   15.288000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[   15.288000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   15.312000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   15.312000] Uniform CD-ROM driver Revision: 3.20
[   15.312000] sr 5:0:0:0: Attached scsi CD-ROM sr0
[   15.316000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   15.316000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   15.360000] atl1 0000:02:00.0: Unable to enable MSI: -22
[   15.380000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   15.512000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   15.552000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[   16.004000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[   16.004000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   16.684000] lp: driver loaded but no devices found
[   16.764000] Adding 2265156k swap on /dev/sda4.  Priority:-1 extents:1 across:2265156k
[   17.600000] ipw3945: Radio Frequency Kill Switch is On:
[   17.600000] Kill switch must be turned off for wireless networking to work.
[   18.248000] atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
[   18.852000] NET: Registered protocol family 10
[   18.852000] lo: Disabled Privacy Extensions
[   29.488000] eth0: no IPv6 routers present
[   31.544000] Asus Laptop ACPI Extras version 0.30
[   31.548000]   unsupported model F3Sr, trying default values
[   31.548000]   send /proc/acpi/dsdt to the developers
[   31.568000] ACPI: AC Adapter [AC0] (on-line)
[   31.576000] No dock devices found.
[   31.648000] input: Power Button (FF) as /class/input/input6
[   31.648000] ACPI: Power Button (FF) [PWRF]
[   31.648000] input: Sleep Button (CM) as /class/input/input7
[   31.648000] ACPI: Sleep Button (CM) [SLPB]
[   31.648000] input: Lid Switch as /class/input/input8
[   31.648000] ACPI: Lid Switch [liD]
[   31.792000] ACPI: Battery Slot [BAT0] (battery present)
[   31.812000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   33.172000] ppdev: user-space parallel port driver
[   33.472000] audit(1195566656.133:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5399 profile="/usr/sbi
n/cupsd"
[   33.508000] apm: BIOS not found.
[   33.908000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   34.000000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   34.000000] NFSD: starting 90-second grace period
[   34.840000] Failure registering capabilities with primary security module.
[   35.084000] Bluetooth: Core ver 2.11
[   35.084000] NET: Registered protocol family 31
[   35.084000] Bluetooth: HCI device and connection manager initialized
[   35.084000] Bluetooth: HCI socket layer initialized
[   35.096000] Bluetooth: L2CAP ver 2.8
[   35.096000] Bluetooth: L2CAP socket layer initialized
[   35.172000] Bluetooth: RFCOMM socket layer initialized
[   33.508000] apm: BIOS not found.
[   33.908000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   34.000000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   34.000000] NFSD: starting 90-second grace period
[   34.840000] Failure registering capabilities with primary security module.
[   35.084000] Bluetooth: Core ver 2.11
[   35.084000] NET: Registered protocol family 31
[   35.084000] Bluetooth: HCI device and connection manager initialized
[   35.084000] Bluetooth: HCI socket layer initialized
[   35.096000] Bluetooth: L2CAP ver 2.8
[   35.096000] Bluetooth: L2CAP socket layer initialized
[   35.172000] Bluetooth: RFCOMM socket layer initialized
[   35.172000] Bluetooth: RFCOMM TTY layer initialized
[   35.172000] Bluetooth: RFCOMM ver 1.8
[   46.528000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   48.892000] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   48.892000] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   48.892000] [fglrx] Reserve Block - 2 offset =  0X7f7a000 length = 0X80000
[   49.340000] [fglrx] interrupt source 60000001 successfully enabled
[   49.340000] [fglrx] enable ID = 0x00000006
[   49.340000] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[   49.340000] [fglrx] interrupt source 00000040 successfully enabled
[   49.340000] [fglrx] enable ID = 0x00000007
[   49.340000] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[   49.340000] [fglrx] interrupt source 80020000 successfully enabled
[   49.340000] [fglrx] enable ID = 0x00000008
[   49.340000] [fglrx] Receive enable interrupt message with irqEnableMask: 80020000
[   49.340000] [fglrx] interrupt source 20000400 successfully enabled
[   49.340000] [fglrx] enable ID = 0x00000009
[   49.340000] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400
[ 1064.536000] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 1064.592000] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[ 1064.592000] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[ 1064.592000] [fglrx] Reserve Block - 2 offset =  0X7f7a000 length = 0X80000
[ 1064.868000] [fglrx] interrupt source 80020000 successfully enabled
[ 1064.868000] [fglrx] enable ID = 0x00000006
[ 1064.868000] [fglrx] Receive enable interrupt message with irqEnableMask: 80020000
[ 1064.868000] [fglrx] interrupt source 20000400 successfully enabled
[ 1064.868000] [fglrx] enable ID = 0x00000007
[ 1064.868000] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400

cat /proc/asound/card0/codec#0
Codec: Realtek ALC660-VD
Address: 0
Vendor Id: 0x10ec0660
Subsystem Id: 0x10430000
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x34 0x34]
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x00 0x00]
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x00 0x00]
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f]
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f] [0x9f 0x9f] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x1f 0x1f]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1c 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x081003c: IN OUT HP EAPD Detect
  Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0810034: IN OUT EAPD Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0834: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0834: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x081734: IN OUT Detect
  Pin Default 0x01a1183f: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x21: IN
  Connection: 1
     0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173c: IN OUT HP Detect
  Pin Default 0x99a30130: [Fixed] Mic at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x21: IN
  Connection: 2
     0x0c* 0x0f
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0834: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Connection: 1
     0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173c: IN OUT HP Detect
  Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Connection: 2
     0x0c* 0x0f
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x0820: IN
  Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x0810: OUT
  Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono

Помогите кто знает а то обидно до жути! Заранее благодарю.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #2 : 21 Ноябрь 2007, 10:54:53 »
Попробовал уже все комбинации в настройка  alsa-base для  snd-hda-intel : asus, asus-laptop на этих появлется индикатор звука и работает микшер все настройки в котором выставил на максимум но звука так и нету. При других опциях даже микшер не работает. Всё таки не хочется уходить из никсов, а звука хочется. Облазил все форуму включая зарубежные пока ничего по своей модели не нашёл...


Оффлайн alexandersz

  • Новичок
  • *
  • Сообщений: 2
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #3 : 21 Ноябрь 2007, 11:53:45 »
Такое-же железо и проблема. Пробовал alsa пересобирать - не помогло.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #4 : 21 Ноябрь 2007, 13:01:42 »
Я так понял пока решений нет, если кто что знает отпишите сюда или в асю 331374, любые предложения будут восприняты с благодарностью

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #5 : 21 Ноябрь 2007, 13:23:20 »
alsa собирал с поддержкой hda-intel или просто собрал?
Лучше маленький доллар, чем большое спасибо.

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #6 : 21 Ноябрь 2007, 13:27:47 »
почитай здесь:http://habrahabr.ru/blog/ubuntu/28171.html#habracut,может быть поможет.
Лучше маленький доллар, чем большое спасибо.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #7 : 21 Ноябрь 2007, 13:30:05 »
Собирал конечно же с поддержкой hda-intel

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #8 : 21 Ноябрь 2007, 13:35:37 »
2:xkool Спасибо но к сожалению не помогло....


Вот ещё одна странность которую заметил

yyyyy@lx-xxxx:~$  sudo aplay --list-devices
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC861VD Analog [ALC861VD Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
почему то обе определяются как card0  или это нормально?!

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #9 : 21 Ноябрь 2007, 14:13:26 »
они завязаны между собой,поэтому так определяются
Лучше маленький доллар, чем большое спасибо.

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #10 : 21 Ноябрь 2007, 14:19:00 »
выкладываю свой alsa-base,можеть быть поможет

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-ioctl32 ; : ; }
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --Qb snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }

# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe -Qb saa7134-alsa ; : ; }

# Load snd-seq for devices that don't have hardware midi;
#   Ubuntu #26283, #43682, #56005; works around Ubuntu #34831 for
#   non-Creative Labs PCI hardware
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }
# Prevent abnormal drivers from grabbing index 0
options snd-hda-intel model=laptop
options snd-bt87x index=-2
options cx88-alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
Лучше маленький доллар, чем большое спасибо.

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #11 : 21 Ноябрь 2007, 14:19:55 »
У меня на Asus Z99H работает
Лучше маленький доллар, чем большое спасибо.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #12 : 21 Ноябрь 2007, 17:23:53 »
2 xkool:  а какая у тебя версия алсы?

Оффлайн xkool

  • Старожил
  • *
  • Сообщений: 1460
  • do not love my brain
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #13 : 21 Ноябрь 2007, 17:30:37 »
1.0.14
Лучше маленький доллар, чем большое спасибо.

Оффлайн R.M.I.

  • Автор темы
  • Новичок
  • *
  • Сообщений: 10
    • Просмотр профиля
Re: Настройка звука на ноутбуке ASUS F3Sr
« Ответ #14 : 21 Ноябрь 2007, 18:22:25 »
К сожалению не помогло! :'(  :'(  :'(

 

Страница сгенерирована за 0.067 секунд. Запросов: 23.