sudo dhclient eth0 - пустой результат

[RichWeber]

Здравствуйте!

Подскажите, почему команда

Код: [Выделить]

sudo dhclient eth0ничего не показывает, долго думает и снова появляется приглашение к вводу команды?

DHCP на роутере включен.

[Гарри Кашпировский]

Потому что так захотели разработчики ics-dhcp-4.x. Логи ищите /var/log/syslog

[RichWeber]

результат работы команды

(Нажмите, чтобы показать/скрыть)

Jan 12 10:44:19 richweber-K50C kernel: [ 4482.725619] r8168: eth0: link down
Jan 12 10:44:19 richweber-K50C kernel: [ 4482.736211] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 12 10:44:19 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Jan 12 10:44:20 richweber-K50C kernel: [ 4483.724031] r8168: eth0: link down
Jan 12 10:44:21 richweber-K50C NetworkManager[946]: <info> (eth0): carrier now ON (device state 10)
Jan 12 10:44:21 richweber-K50C kernel: [ 4484.724042] r8168: eth0: link up
Jan 12 10:44:21 richweber-K50C kernel: [ 4484.724278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 12 10:44:21 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 12 10:44:23 richweber-K50C avahi-daemon[948]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::226:18ff:fef9:44dc.
Jan 12 10:44:23 richweber-K50C avahi-daemon[948]: New relevant interface eth0.IPv6 for mDNS.
Jan 12 10:44:23 richweber-K50C avahi-daemon[948]: Registering new address record for fe80::226:18ff:fef9:44dc on eth0.*.
Jan 12 10:44:30 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 12 10:44:32 richweber-K50C kernel: [ 4495.080014] eth0: no IPv6 routers present
Jan 12 10:44:42 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Jan 12 10:44:49 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 12 10:44:57 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 12 10:45:06 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 12 10:45:15 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Jan 12 10:45:30 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 12 10:45:42 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 12 10:45:50 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
Jan 12 10:46:11 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
Jan 12 10:46:25 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Jan 12 10:46:38 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
Jan 12 10:46:48 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Jan 12 10:46:59 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 12 10:47:11 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Jan 12 10:47:18 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 12 10:47:30 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
Jan 12 10:47:40 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
Jan 12 10:47:59 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
Jan 12 10:48:17 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
Jan 12 10:48:30 richweber-K50C ntpd[11511]: Listen normally on 6 eth0 fe80::226:18ff:fef9:44dc UDP 123
Jan 12 10:48:30 richweber-K50C ntpd[11511]: new interface(s) found: waking up resolver
Jan 12 10:48:37 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 12 10:48:45 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Jan 12 10:48:58 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 12 10:49:10 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
Jan 12 10:49:20 richweber-K50C dhclient: No DHCPOFFERS received.
Jan 12 10:49:20 richweber-K50C dhclient: No working leases in persistent database - sleeping.
Jan 12 10:49:20 richweber-K50C avahi-autoipd(eth0)[12901]: Found user 'avahi-autoipd' (UID 105) and group 'avahi-autoipd' (GID 112).
Jan 12 10:49:20 richweber-K50C avahi-autoipd(eth0)[12901]: Successfully called chroot().
Jan 12 10:49:20 richweber-K50C avahi-autoipd(eth0)[12901]: Successfully dropped root privileges.
Jan 12 10:49:20 richweber-K50C avahi-autoipd(eth0)[12901]: Starting with address 169.254.9.158
Jan 12 10:49:26 richweber-K50C avahi-autoipd(eth0)[12901]: Callout BIND, address 169.254.9.158 on interface eth0
Jan 12 10:49:26 richweber-K50C avahi-daemon[948]: Joining mDNS multicast group on interface eth0.IPv4 with address 169.254.9.158.
Jan 12 10:49:26 richweber-K50C avahi-daemon[948]: New relevant interface eth0.IPv4 for mDNS.
Jan 12 10:49:26 richweber-K50C avahi-daemon[948]: Registering new address record for 169.254.9.158 on eth0.IPv4.
Jan 12 10:49:30 richweber-K50C avahi-autoipd(eth0)[12901]: Successfully claimed IP address 169.254.9.158

ifconfig

(Нажмите, чтобы показать/скрыть)

richweber@richweber-K50C:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:26:18:f9:44:dc 
          inet6 addr: fe80::226:18ff:fef9:44dc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:135 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:40 Base address:0x6000

eth0:avahi Link encap:Ethernet  HWaddr 00:26:18:f9:44:dc 
          inet addr:169.254.9.158  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:40 Base address:0x6000

lo        Link encap:Локальная петля (Loopback) 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:9153 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9153 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:711944 (711.9 KB)  TX bytes:711944 (711.9 KB)

я так понимаю что сетевая не смогла получить IP, где искать причину - почему не смогла?
и что это - eth0:avahi ?

[Гарри Кашпировский]

Код: [Выделить]

RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)Ох этот rtl8168(9)
dmesg, все что касается r8168 (r8169)
lspci -knn |grep "Eth" -A2
Драйвер сами собирали?

Пользователь решил продолжить мысль 12 Января 2012, 13:10:36:и что это - eth0:avahi ?
Это zeroconf в Linux.

[RichWeber]

Драйвер сами собирали?

да, также обновил ядро до 3.1

Код: [Выделить]

lspci -knn |grep "Eth" -A2

(Нажмите, чтобы показать/скрыть)

richweber@richweber-K50C:~$ lspci -knn |grep "Eth" -A2
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
   Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
   Kernel driver in use: r8168

как правильно выполнить dmesg? беза параметров? вроде видел где то что можно указать и выберет по конкретной фразе, типа "r8168", но как правильно тогда команда?

[Гарри Кашпировский]

просто dmesg, желательно сперва перезагрузится, что бы меньше мусорной информации было.
"Родной" r8169 из 3.1 пробовали?
Встроенная сетевушка?

[RichWeber]

dmesg

(Нажмите, чтобы показать/скрыть)

[    1.757200] sd 2:0:0:0: [sda] Write Protect is off
[    1.757205] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.757243] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.757714] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.828021] usb 3-1: new low speed USB device number 2 using ohci_hcd
[    1.838834]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.839485] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.920230] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR09, max UDMA/133
[    1.936215] ata4.00: configured for UDMA/133
[    1.941687] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR09 PQ: 0 ANSI: 5
[    1.946646] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.946651] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.946851] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.947071] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.057955] input: 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input5
[    2.060107] generic-usb 0003:04F3:02F4.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [2.4G Wireless Mouse] on usb-0000:00:03.1-1/input0
[    2.060451] usbcore: registered new interface driver usbhid
[    2.060456] usbhid: USB HID core driver
[    2.759014] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.876354] init: ureadahead main process (241) terminated with status 5
[    5.251030] udevd[280]: starting version 173
[    5.938776] Adding 1965052k swap on /dev/sda7.  Priority:-1 extents:1 across:1965052k
[    6.568778] lp: driver loaded but no devices found
[    7.723696] asus_laptop: Asus Laptop Support version 0.42
[    7.723960] asus_laptop:   K50C model detected
[    7.724520] asus_laptop: Backlight controlled by ACPI video driver
[    7.724690] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
[    8.041572] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.070318] cfg80211: Calling CRDA to update world regulatory domain
[    8.332185] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[    8.344040] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    8.408472] r8168 Gigabit Ethernet driver 8.027.00-NAPI loaded
[    8.408527] r8168 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.408561] r8168 0000:03:00.0: setting latency timer to 64
[    8.408661] r8168 0000:03:00.0: irq 40 for MSI/MSI-X
[    8.409569] eth%d: RTL8168B/8111B at 0xf8016000, 00:26:18:f9:44:dc, IRQ 40
[    8.435720] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[    8.435728] eth0: Identified chip type is 'RTL8168B/8111B'.
[    8.435731] r8168  Copyright (C) 2011  Realtek NIC software team <nicfae@realtek.com>
[    8.435734]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[    8.435736]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[    8.510330] acpi device:17: registered as cooling_device1
[    8.510419] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input7
[    8.514827] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.912358] psmouse serio4: ID: 10 00 64
[    8.993072] elantech: assuming hardware version 2, firmware version 4.1.1
[    9.024870] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    9.113760] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[    9.614207] ath9k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.614224] ath9k 0000:02:00.0: setting latency timer to 64
[    9.663499] ath: EEPROM regdomain: 0x8283
[    9.663504] ath: EEPROM indicates we should expect a country code
[    9.663508] ath: doing EEPROM country->regdmn map search
[    9.663510] ath: country maps to regdmn code: 0x3
[    9.663513] ath: Country alpha2 being used: RU
[    9.663515] ath: Regpair used: 0x3
[    9.663521] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    9.663525] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.663528] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    9.663532] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.665665] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[   10.326287] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   10.327112] Registered led device: ath9k-phy0
[   10.327121] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8120000, irq=18
[   10.327617] cfg80211: Pending regulatory request, waiting for it to be processed...
[   10.905103] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   10.905202] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   10.905206] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   10.905212] cfg80211: World regulatory domain updated:
[   10.905215] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.905219] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.905223] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.905227] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.905231] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.905235] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.905262] cfg80211: Calling CRDA for country: RU
[   10.997078] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   10.997086] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   10.997169] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   10.997173] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   10.997176] cfg80211: Disabling freq 2484 MHz
[   10.997182] cfg80211: Regulatory domain changed to country: RU
[   10.997185] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.997189] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.997192] cfg80211:     (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[   11.262109] Linux video capture interface: v2.00
[   11.299574] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5094)
[   11.309398] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input9
[   11.311075] usbcore: registered new interface driver uvcvideo
[   11.311081] USB Video Class driver (1.1.1)
[   11.512920] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr
[   11.828512] snd_hda_intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.828564] snd_hda_intel 0000:00:0f.0: setting latency timer to 64
[   11.927335] type=1400 audit(1326362945.161:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=550 comm="apparmor_parser"
[   11.927472] type=1400 audit(1326362945.161:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=550 comm="apparmor_parser"
[   11.927577] type=1400 audit(1326362945.161:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=550 comm="apparmor_parser"
[   11.936763] type=1400 audit(1326362945.173:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
[   11.936914] type=1400 audit(1326362945.173:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
[   11.937034] type=1400 audit(1326362945.173:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
[   12.041615] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input10
[   12.042060] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input11
[   12.273753] type=1400 audit(1326362945.509:: apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=727 comm="apparmor_parser"
[   12.273895] type=1400 audit(1326362945.509:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
[   12.274015] type=1400 audit(1326362945.509:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=727 comm="apparmor_parser"
[   13.083579] type=1400 audit(1326362946.317:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=803 comm="apparmor_parser"
[   14.903951] init: udev-fallback-graphics main process (876) terminated with status 1
[   16.103868] r8168: eth0: link down
[   16.137372] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.100019] r8168: eth0: link up
[   18.100249] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.658403] ppdev: user-space parallel port driver
[   19.830006] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.960924] audit_printk_skb: 6 callbacks suppressed
[   19.960930] type=1400 audit(1326362953.197:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=961 comm="apparmor_parser"
[   19.961205] type=1400 audit(1326362953.197:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=961 comm="apparmor_parser"
[   22.746563] wlan0: authenticate with 20:cf:30:88:ed:74 (try 1)
[   22.748557] wlan0: authenticated
[   22.749256] wlan0: associate with 20:cf:30:88:ed:74 (try 1)
[   22.751897] wlan0: RX AssocResp from 20:cf:30:88:ed:74 (capab=0x11 status=0 aid=2)
[   22.751901] wlan0: associated
[   22.752628] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   28.896023] eth0: no IPv6 routers present
[   32.992010] wlan0: no IPv6 routers present
[  137.598926] type=1400 audit(1326363070.830:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1313 comm="apparmor_parser"
[  138.088503] type=1400 audit(1326363071.322:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1314 comm="apparmor_parser"
[  138.088659] type=1400 audit(1326363071.322:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1314 comm="apparmor_parser"
[  138.088781] type=1400 audit(1326363071.322:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"
[  147.620693] type=1400 audit(1326363080.857:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1315 comm="apparmor_parser"
[  147.622327] type=1400 audit(1326363080.857:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1315 comm="apparmor_parser"
[  147.623527] type=1400 audit(1326363080.857:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1315 comm="apparmor_parser"
[  148.273330] type=1400 audit(1326363081.508:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1317 comm="apparmor_parser"
[  148.273762] type=1400 audit(1326363081.508:24): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1317 comm="apparmor_parser"
[  149.096348] type=1400 audit(1326363082.332:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1318 comm="apparmor_parser"
[  149.096789] type=1400 audit(1326363082.332:26): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1318 comm="apparmor_parser"
[  149.385081] type=1400 audit(1326363082.620:27): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1319 comm="apparmor_parser"
[  149.761564] type=1400 audit(1326363082.996:28): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1320 comm="apparmor_parser"
[  149.761977] type=1400 audit(1326363082.996:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1320 comm="apparmor_parser"
[  150.864789] init: apport pre-start process (1354) terminated with status 1
[  150.870326] init: apport post-stop process (1382) terminated with status 1
[  155.440365] vboxdrv: Found 1 processor cores.
[  155.448073] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  155.448080] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[  155.781008] BUG: unable to handle kernel paging request at 3378f000
[  155.781018] IP: [<f8106101>] VBoxPciLinuxInit+0x101/0x1000 [vboxpci]
[  155.781030] *pde = 00000000
[  155.781034] Oops: 0002 [#1] SMP
[  155.781039] Modules linked in: pci_stub vboxpci(+) vboxnetadp vboxnetflt vboxdrv parport_pc ppdev binfmt_misc snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi uvcvideo videodev snd_rawmidi snd_seq_midi_event snd_seq arc4 snd_timer snd_seq_device joydev ath9k mac80211 snd soundcore ath9k_common snd_page_alloc ath9k_hw psmouse video r8168 ath sis_agp cfg80211 shpchp serio_raw asus_laptop sparse_keymap lp parport usbhid hid sata_sis
[  155.781081]
[  155.781085] Pid: 1465, comm: modprobe Not tainted 3.1.4-030104-generic #201111281851 ASUSTeK Computer Inc.  K50C/K50C     
[  155.781093] EIP: 0060:[<f8106101>] EFLAGS: 00010293 CPU: 0
[  155.781099] EIP is at VBoxPciLinuxInit+0x101/0x1000 [vboxpci]
[  155.781102] EAX: 00000000 EBX: 00000000 ECX: 00000001 EDX: f82fc68f
[  155.781106] ESI: f8203080 EDI: f82fd214 EBP: f3ad5f58 ESP: f3ad5f44
[  155.781109]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  155.781113] Process modprobe (pid: 1465, ti=f3ad4000 task=f71325e0 task.ti=f3ad4000)
[  155.781116] Stack:
[  155.781118]  00000001 f82fc686 00000000 f82fd020 085ea070 f3ad5f88 c1001125 00000000
[  155.781126]  00000000 f8107000 f3ad5f74 c107d2bf f8106000 00000000 00002460 f82fd020
[  155.781134]  085ea070 f3ad5fac c10823a5 00002460 f3ad5fac c1129805 f725e540 085f21d8
[  155.781142] Call Trace:
[  155.781150]  [<c1001125>] do_one_initcall+0x35/0x170
[  155.781158]  [<c107d2bf>] ? set_page_attributes+0x1f/0x30
[  155.781164]  [<f8106000>] ? 0xf8105fff
[  155.781169]  [<c10823a5>] sys_init_module+0xb5/0x210
[  155.781175]  [<c1129805>] ? sys_close+0x75/0xc0
[  155.781182]  [<c153c49f>] sysenter_do_call+0x12/0x28
[  155.781184] Code: 00 00 e8 73 7a f5 c8 85 c0 75 5d b8 8f c6 2f f8 e8 b5 8d f7 c8 85 c0 89 c6 a3 10 d2 2f f8 74 32 83 38 02 74 57 8b 80 78 01 00 00
[  155.781213]  ff 00 e9 00 00 00 00 eb 14 8b 43 04 b9 fb 60 10 f8 89 f2 ff
[  155.781228] EIP: [<f8106101>] VBoxPciLinuxInit+0x101/0x1000 [vboxpci] SS:ESP 0068:f3ad5f44
[  155.781236] CR2: 000000003378f000
[  155.781240] ---[ end trace ccc0a4a4c26694f1 ]---
[  157.799847] Bluetooth: Core ver 2.16
[  157.801534] NET: Registered protocol family 31
[  157.801542] Bluetooth: HCI device and connection manager initialized
[  157.801547] Bluetooth: HCI socket layer initialized
[  157.801550] Bluetooth: L2CAP socket layer initialized
[  157.803351] Bluetooth: SCO socket layer initialized
[  157.832802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  157.832810] Bluetooth: BNEP filters: protocol multicast
[  159.495959] [drm] Initialized drm 1.1.0 20060810
[  160.325855] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  160.325867] pci 0000:01:00.0: setting latency timer to 64
[  160.327604] [drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0
[  160.333068] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[  160.333099] agpgart-sis 0000:00:00.0: putting AGP V3 device into 4x mode
[  160.333182] pci 0000:01:00.0: putting AGP V3 device into 4x mode
[  164.493076] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[  165.203502] init: plymouth-stop pre-start process (1947) terminated with status 1
[  171.405920] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[  393.923117] wlan0: deauthenticating from 20:cf:30:88:ed:74 by local choice (reason=3)
[  394.004339] cfg80211: All devices are disconnected, going to restore regulatory settings
[  394.004349] cfg80211: Restoring regulatory settings
[  394.004362] cfg80211: Calling CRDA to update world regulatory domain
[  394.022601] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  394.022606] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[  394.022609] cfg80211: Disabling freq 2484 MHz
[  394.022614] cfg80211: World regulatory domain updated:
[  394.022616] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  394.022620] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  394.022624] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  394.022628] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  394.022632] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  394.022636] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  395.482725] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  398.173503] wlan0: authenticate with 20:cf:30:88:ed:74 (try 1)
[  398.175488] wlan0: authenticated
[  398.176468] wlan0: associate with 20:cf:30:88:ed:74 (try 1)
[  398.179093] wlan0: RX AssocResp from 20:cf:30:88:ed:74 (capab=0x11 status=0 aid=2)
[  398.179097] wlan0: associated
[  398.179599] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  408.600012] wlan0: no IPv6 routers present
[  562.563386] r8168: eth0: link down
[  562.565162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  563.560019] r8168: eth0: link down
[  564.560027] r8168: eth0: link up
[  564.560300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  575.344016] eth0: no IPv6 routers present

Первый раз когда спросил почему нетворк-менеджер не видит проводную сеть и показал конфиги - подсказали менять драйвер. И так пристально как сейчас на родном драйвере проводную сетку не насиловал.
Пользователь решил продолжить мысль 12 Января 2012, 14:39:02:

Дома использую модем + роутер ASUS с поддержкой WI-FI. Когда устанавливал Ubuntu, сетевой кабель не подключал, а сеть была найдена через WI-FI. Хотя в Network Manager проводная сеть была не активна, но доступ к сети был через WI-FI и в принципе все устраивало. Один раз заинтересовал вопрос - почему же не активна проводная сеть. Перечитал форумы, инструкцию по настройке сети вручную. Начал делать - снес Network Manager, поредактировал конфиги, но ничего не получилось и забросил это дело до лучших времен.

Теперь начал работать на офисе и там роутер D-link без WI-FI. Настроил роутер. На винде все в порядке.
Но никак не поддается настроить в Ubuntu.

[Гарри Кашпировский]

Код: (text) [Выделить]

[    8.409569] eth%d: RTL8168B/8111B at 0xf8016000, 00:26:18:f9:44:dc, IRQ 40Вот этот выхлоп мне совершенно не понравился
Тогда как по идее он такой

Код: (text) [Выделить]

[    2.755008] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xf8412000, 70:71:bc:d5:37:00, XID 0c200000 IRQ 44То есть в dmesg не хватает названия драйвера и номера PCIbus (03:00.0), возможно что это просто такой выхлоп, но, кажется, Вам просто не свезло с сетевушкой.

[RichWeber]

То есть в dmesg не хватает названия драйвера и номера PCIbus (03:00.0), возможно что это просто такой выхлоп, но, кажется, Вам просто не свезло с сетевушкой.

То есть диагноз - не видать мне проводного интернета ? Или возможны какие варианты?
Пользователь решил продолжить мысль 12 Января 2012, 15:24:00:

есть ли люди у которых работает проводная сеть на ASUS K50C + Ubuntu 11 ?

[Гарри Кашпировский]

Попробовать использовать драйвер r8169 из 3.1
Проверяется достаточно просто

Код: (text) [Выделить]

rmmod r8168
modprobe r8169
ifconfig -a
dhclient (по результатам ifconfig)Стоит еще поиграться с ethtool, может переключение на какой либо из режимов заставит её ожить, или BIOS обновить, ну это как готовиться к войне с Марсом.
Такие вот варианты.

[RichWeber]

Попробовать использовать драйвер r8169 из 3.1

Сейчас буду пытаться восстановить
Пользователь решил продолжить мысль 12 Января 2012, 20:07:11:Странно, не могу удалить

Код: [Выделить]

richweber@richweber-K50C:~$ sudo rmmod r8168
ERROR: Removing 'r8168': Device or resource busy

как удалял 8169 такого не было

и еще, как понимаю я еще вносил записи в /etc/modprobe.d/blacklist.conf ,нужно ли их теперь удалить?

[Гарри Кашпировский]

Код: [Выделить]

ERROR: Removing 'r8168': Device or resource busyБывает, скорее всего еще какой-то модуль нужно выгрузить.
grep'ните lsmod на предмет r8168.

[RichWeber]

Код: [Выделить]

richweber@richweber-K50C:~$ lsmod | grep r8168
r8168                 202039  0 [permanent]
richweber@richweber-K50C:~$ sudo rmmod r8168
ERROR: Removing 'r8168': Device or resource busy

нехотит(
Пользователь решил продолжить мысль 13 Января 2012, 15:23:37:Не знаю что помогло, но в Network Manadger наконец то появилась проводная сеть 
Сеть подключается, но трафик не идет. С отключением r8168 и восстановлением r8169 все та же беда:

Код: [Выделить]

lspci -v

(Нажмите, чтобы показать/скрыть)

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
   Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet]
   Flags: bus master, fast devsel, latency 0, IRQ 40
   I/O ports at ec00 [size=256]
   Memory at febff000 (64-bit, non-prefetchable) [size=4K]
   Expansion ROM at febc0000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel driver in use: r8168
   Kernel modules: r8168, r8169

(Нажмите, чтобы показать/скрыть)

richweber@richweber-K50C:~$ lsmod | grep r8168; sudo rmmod
r8168r8168                 202039  0 [permanent]
ERROR: Removing 'r8168': Device or resource busy

richweber@richweber-K50C:~$ echo "blacklist r8168" | sudo tee -a /etc/modprobe.d/blacklist.conf
blacklist r8168

richweber@richweber-K50C:~$ modprobe r8169
FATAL: Error inserting r8169 (/lib/modules/3.1.4-030104-generic/kernel/drivers/net/r8169.ko): Operation not permitted

Что делать? Хоть стреляйся ((

[RichWeber]

Вот, что показывает на r8169

Код: [Выделить]

dmesg

(Нажмите, чтобы показать/скрыть)

[    9.987046] r8169 0000:03:00.0: eth0: link down
[    9.990365] ADDRCONF(NETDEV_UP): eth0: link is not ready

Код: [Выделить]

lspci -v

(Нажмите, чтобы показать/скрыть)

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
   Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet]
   Flags: bus master, fast devsel, latency 0, IRQ 40
   I/O ports at ec00 [size=256]
   Memory at febff000 (64-bit, non-prefetchable) [size=4K]
   Expansion ROM at febc0000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel driver in use: r8169
   Kernel modules: r8169

Код: [Выделить]

lspci -knn |grep "Eth" -A2

(Нажмите, чтобы показать/скрыть)

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
   Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
   Kernel driver in use: r8169

Код: [Выделить]

sudo dhclient eth0

(Нажмите, чтобы показать/скрыть)

Jan 14 12:10:59 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Jan 14 12:11:02 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 14 12:11:10 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
Jan 14 12:11:24 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Jan 14 12:11:39 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 14 12:11:48 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Jan 14 12:12:03 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
Jan 14 12:12:22 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
Jan 14 12:12:41 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
Jan 14 12:13:02 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Jan 14 12:13:14 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
Jan 14 12:13:30 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
Jan 14 12:13:47 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Jan 14 12:14:00 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
Jan 14 12:14:21 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 14 12:14:30 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 14 12:14:39 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Jan 14 12:14:50 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
Jan 14 12:14:59 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Jan 14 12:15:12 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Jan 14 12:15:23 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Jan 14 12:15:34 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
Jan 14 12:15:53 richweber-K50C dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Jan 14 12:16:00 richweber-K50C dhclient: No DHCPOFFERS received.
Jan 14 12:16:00 richweber-K50C dhclient: No working leases in persistent database - sleeping.
Jan 14 12:16:00 richweber-K50C avahi-autoipd(eth0)[1865]: Found user 'avahi-autoipd' (UID 105) and group 'avahi-autoipd' (GID 112).
Jan 14 12:16:00 richweber-K50C avahi-autoipd(eth0)[1865]: Successfully called chroot().
Jan 14 12:16:00 richweber-K50C avahi-autoipd(eth0)[1865]: Successfully dropped root privileges.
Jan 14 12:16:00 richweber-K50C avahi-autoipd(eth0)[1865]: Starting with address 169.254.9.158

Код: [Выделить]

ifconfig -a

(Нажмите, чтобы показать/скрыть)

eth0      Link encap:Ethernet  HWaddr 00:26:18:f9:44:dc 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:40 Base address:0xa000

eth0:avahi Link encap:Ethernet  HWaddr 00:26:18:f9:44:dc 
          inet addr:169.254.9.158  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Interrupt:40 Base address:0xa000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:25:d3:62:db:90 
          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::225:d3ff:fe62:db90/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2196 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1224 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2037596 (2.0 MB)  TX bytes:142256 (142.2 KB)

Возможно ли реанимировать клиента???




Пользователь решил продолжить мысль 14 Января 2012, 18:54:48:KT315 большое спасибо, что отозвались помочь!

Проблему решил сам.
Проводная сеть работает и на r8169.
Решение оказалось довольно простым, только почти неделю потратил на поиски - в /boot/grub/grub.cfg заменил ro quiet splash на nolapic и перезагрузился