smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD series (30-60 GB)
Device Model: TOSHIBA MK4019GAX
Serial Number: 921G1771T
Firmware Version: FA002A
User Capacity: 40 007 761 920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu May 31 12:50:05 2001 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 342) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 37) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1712
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1069
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 156
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 1669
10 Spin_Retry_Count 0x0033 120 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 735
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 109
193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 56929
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 100
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 193 193 000 Old_age Always - 1551
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8271
222 Loaded_Hours 0x0032 098 098 000 Old_age Always - 863
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 388
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 85 inconsistent with error log pointer 1
ATA Error Count: 85 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 85 occurred at disk power-on lifetime: 1668 hours (69 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 3e 09 54 e0 Error: ICRC, ABRT at LBA = 0x0054093e = 5507390
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 3f 08 54 e0 00 00:23:30.041 WRITE DMA
f8 00 00 00 00 00 e0 00 00:23:30.040 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 00:23:30.033 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:23:30.033 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 00:23:30.033 READ NATIVE MAX ADDRESS
Error 84 occurred at disk power-on lifetime: 1668 hours (69 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 3e 09 54 e0 Error: ICRC, ABRT at LBA = 0x0054093e = 5507390
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 3f 08 54 e0 00 00:23:29.741 WRITE DMA
f8 00 00 00 00 00 e0 00 00:23:29.740 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 00:23:29.733 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:23:29.733 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 00:23:29.732 READ NATIVE MAX ADDRESS
Error 83 occurred at disk power-on lifetime: 1668 hours (69 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 3e 09 54 e0 Error: ICRC, ABRT at LBA = 0x0054093e = 5507390
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 3f 08 54 e0 00 00:23:29.440 WRITE DMA
ca 00 00 3f 07 54 e0 00 00:23:29.426 WRITE DMA
ca 00 00 3f 06 54 e0 00 00:23:29.357 WRITE DMA
ca 00 08 d7 ed 52 e0 00 00:23:29.357 WRITE DMA
ca 00 08 47 d5 01 e0 00 00:23:29.356 WRITE DMA
Error 82 occurred at disk power-on lifetime: 1668 hours (69 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 3e 05 54 e0 Error: ICRC, ABRT at LBA = 0x0054053e = 5506366
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 3f 04 54 e0 00 00:23:29.025 WRITE DMA
f8 00 00 00 00 00 e0 00 00:23:29.016 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 00:23:29.009 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:23:29.009 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 00:23:29.009 READ NATIVE MAX ADDRESS
Error 81 occurred at disk power-on lifetime: 1668 hours (69 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 3e 05 54 e0 Error: ICRC, ABRT at LBA = 0x0054053e = 5506366
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 00 3f 04 54 e0 00 00:23:28.717 WRITE DMA
f8 00 00 00 00 00 e0 00 00:23:28.716 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 00:23:28.708 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:23:28.701 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 00:23:28.700 READ NATIVE MAX ADDRESS
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1627 -
Device does not support Selective Self Tests/Logging
Тема: Контроллер или винт накрывается? (Прочитано 2371 раз)
