прошу помоши в настройке интернета usb модемом

[snake_1977]

приветствую всех.
в убунте новичок...  надоела Windows со своими глюками, полез изучать. столкнулся с проблемой - не могу настроить zte mf170. вычитал, что его нужно сделать usb модемом.
https://forum.ubuntu.ru/index.php?topic=110317.0 все получилось. когда запускаю дозвон прерывается с ошибкой pppd 16. в логе вроде ничего смертельного не нашел. подскажите уважаемые куда и в какую сторону копать......

[fisher74]

надоела Windows со своими глюками, полез изучать.

Тут видимо опечатка закралась. Следует читать так

надоела Windows со своими глюками, полез новые ловитьизучать.

По вопросу: без логов Вам ниуто ничего не скажет. Это будет как пальцем в небо тыкать.

[snake_1977]

Код: [Выделить]

19.06.12 15:53:37 snake-3 modem-manager[2472] <info>  (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7 claimed port ttyUSB0
19.06.12 15:53:37 snake-3 NetworkManager[806] <warn> (ttyUSB2): failed to look up interface index
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0)
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/6
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): now managed
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): deactivating device (reason 'managed') [2]
19.06.12 15:53:37 snake-3 NetworkManager[806] nm_system_iface_flush_routes: assertion `ifindex > 0' failed
19.06.12 15:53:37 snake-3 NetworkManager[806] nm_system_iface_flush_addresses: assertion `ifindex > 0' failed
19.06.12 15:53:37 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) starting connection 'Билайн - USB-модем'
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0]
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0]
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0]
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  (ttyUSB2) opening serial port...
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  (ttyUSB1) opening serial port...
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  (ttyUSB2): using text mode for SMS
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
19.06.12 15:53:45 snake-3 NetworkManager[806] <info> WWAN now enabled by management service
19.06.12 15:53:45 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
19.06.12 15:53:46 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
19.06.12 15:53:46 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled...
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting...
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0]
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful.
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled.
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete.
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started...
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0]
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> starting PPP connection
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> pppd started with pid 2505
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete.
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started...
19.06.12 15:53:46 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete.
19.06.12 15:53:46 snake-3 pppd[2505] Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
19.06.12 15:53:46 snake-3 pppd[2505] pppd 2.4.5 started by root, uid 0
19.06.12 15:53:46 snake-3 pppd[2505] Removed stale lock on ttyUSB2 (pid 2116)
19.06.12 15:53:46 snake-3 NetworkManager[806]    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
19.06.12 15:53:46 snake-3 NetworkManager[806]    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
19.06.12 15:53:46 snake-3 pppd[2505] Using interface ppp0
19.06.12 15:53:46 snake-3 pppd[2505] Connect: ppp0 <--> /dev/ttyUSB2
19.06.12 15:54:06 snake-3 NetworkManager[806] <warn> pppd timed out or didn't initialize our dbus module
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started...
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
19.06.12 15:54:06 snake-3 NetworkManager[806] <warn> Activation (ttyUSB2) failed.
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete.
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0]
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> (ttyUSB2): deactivating device (reason 'none') [0]
19.06.12 15:54:06 snake-3 NetworkManager[806] nm_system_iface_flush_routes: assertion `ifindex > 0' failed
19.06.12 15:54:06 snake-3 NetworkManager[806] nm_system_iface_flush_addresses: assertion `ifindex > 0' failed
19.06.12 15:54:06 snake-3 modem-manager[2472] <info>  (ttyUSB2) closing serial port...
19.06.12 15:54:06 snake-3 modem-manager[2472] <info>  (ttyUSB2) serial port closed
19.06.12 15:54:06 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
19.06.12 15:54:06 snake-3 modem-manager[2472] <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> connected)
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> Policy set 'Snake' (eth1) as default for IPv4 routing and DNS.
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> Policy set 'Snake' (eth1) as default for IPv4 routing and DNS.
19.06.12 15:54:06 snake-3 NetworkManager[806] <info> disconnect failed: (32) The serial port is not open.
Используйте тэг КОД
--Пупизоид