Добрый день. Ставлю сборку от UALinux. На работе работаю под ней уже 2 месяц, все отлично, решил поставить дома. Дома ставлю параллельно с win7. С диска сборка загружается на ура, LiveCD отлично работает. Создал под нее отдельный раздел и swap, указал раздел при разметке, установка прошла успешно. Далее поменял флаг boot с раздела win7 на раздел с Ubuntu и вот загрузился grub и можно было бы радоваться успеху, но Ubuntu встает на загрузке.
Во первых начальное окно с логотипом висит обрезанное наполовину, потом появляется черный экран с выводом загрузки и зависает на одном этапе.
Ниже boot.log
fsck from util-linux 2.19.1
/dev/sdb1: clean, 185951/4161536 files, 1275315/16640000 blocks
* Starting configure network device security[154G[ OK ]
* Starting configure network device[154G[ OK ]
* Starting configure network device security[154G[ OK ]
* Starting Mount network filesystems[154G[ OK ]
* Starting SMB/CIFS File Server[154G[ OK ]
* Starting Failsafe Boot Delay[154G[ OK ]
* Stopping Mount network filesystems[154G[ OK ]
* Starting Bridge socket events into upstart[154G[ OK ]
* Starting configure network device[154G[ OK ]
* Stopping Failsafe Boot Delay[154G[ OK ]
* Starting System V initialisation compatibility[154G[ OK ]
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
* Starting AppArmor profiles [160G
[154G[ OK ]
* Setting sensors limits [160G
[154G[ OK ]
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Checking for running unattended-upgrades:
* Stopping System V initialisation compatibility[154G[ OK ]
* Starting System V runlevel compatibility[154G[ OK ]
* Stopping automatic crash report generation[154G[[31mfail[39;49m]
* Starting LightDM Display Manager[154G[ OK ]
* Starting ACPI daemon[154G[ OK ]
* Starting save kernel messages[154G[ OK ]
* Starting anac(h)ronistic cron[154G[ OK ]
* Starting regular background program processing daemon[154G[ OK ]
* Starting deferred execution scheduler[154G[ OK ]
* Starting CPU interrupts balancing daemon[154G[ OK ]
* Stopping save kernel messages[154G[ OK ]
Какие еще логи необходимы, что бы выяснить причину остановки? Есть доступ ко всем, т.к. примонтировал раздел через Ext2Fcd.
Пользователь решил продолжить мысль 15 Июля 2012, 13:21:57:
Вот еще dmesg[ 0.839854] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x084000a2)
[ 0.842283] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 0.889030] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 0.889033] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 0.889036] [drm] nouveau 0000:02:00.0: Bios version 60.84.32.00
[ 0.889039] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 0.889041] [drm] nouveau 0000:02:00.0: BIT table 'd' not found
[ 0.889042] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 0.889046] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[ 0.889048] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[ 0.889050] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[ 0.889052] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030
[ 0.889054] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c083
[ 0.889056] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[ 0.889059] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 0.889061] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 0.889063] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 0.889065] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 0.889067] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 0.889069] [drm] nouveau 0000:02:00.0: 5: 0x00000362: type 0x62 idx 5 tag 0xff
[ 0.889071] [drm] nouveau 0000:02:00.0: unknown type, using 0xff
[ 0.889074] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xBD68
[ 0.912096] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC058
[ 0.928798] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xCAA6
[ 0.928804] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xCB98
[ 0.929865] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xCDAD
[ 0.929867] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xCE12
[ 0.949711] [drm] nouveau 0000:02:00.0: 0xCE12: Condition still not met after 20ms, skipping following opcodes
[ 0.949783] firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 0.949892] [drm] nouveau 0000:02:00.0: timingset 255 does not exist
[ 0.968587] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[ 0.968591] [drm] nouveau 0000:02:00.0: 0: memory 1008MHz core 675MHz shader 1450MHz fanspeed 100%
[ 0.968606] [drm] nouveau 0000:02:00.0: c: memory 702MHz core 540MHz shader 1458MHz voltage 1300mV
[ 0.968685] [TTM] Zone kernel: Available graphics memory: 2545804 kiB.
[ 0.968687] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 0.968688] [TTM] Initializing pool allocator.
[ 0.968702] [drm] nouveau 0000:02:00.0: Detected 256MiB VRAM
[ 0.970422] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 0.978162] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 0.978164] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[ 0.978647] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.978649] [drm] No driver support for vblank timestamp query.
[ 1.136825] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x40000000, bo ffff880161ff5800
[ 1.136880] fbcon: nouveaufb (fb0) is primary device
[ 1.136939] Console: switching to colour frame buffer device 160x64
[ 1.136963] fb0: nouveaufb frame buffer device
[ 1.136965] drm: registered panic notifier
[ 1.136971] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[ 1.312628] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:7d:9d:de:c4
[ 1.312633] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.312724] sata_nv 0000:00:05.0: version 3.5
[ 1.312739] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 1.312741] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.312820] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.313201] scsi0 : sata_nv
[ 1.313313] scsi1 : sata_nv
[ 1.313428] ata1: SATA max UDMA/133 cmd 0xa400 ctl 0xa800 bmdma 0xb400 irq 21
[ 1.313430] ata2: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xb408 irq 21
[ 1.313508] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 1.313510] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 1.313548] sata_nv 0000:00:05.1: setting latency timer to 64
[ 1.313800] scsi2 : sata_nv
[ 1.313870] scsi3 : sata_nv
[ 1.313962] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 20
[ 1.313965] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 20
[ 1.314035] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
[ 1.314037] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 1.314085] sata_nv 0000:00:05.2: setting latency timer to 64
[ 1.314319] scsi4 : sata_nv
[ 1.314377] scsi5 : sata_nv
[ 1.314470] ata5: SATA max UDMA/133 cmd 0xcc00 ctl 0xd000 bmdma 0xdc00 irq 23
[ 1.314472] ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xdc08 irq 23
[ 1.314642] pata_amd 0000:00:04.0: version 0.4.1
[ 1.314683] pata_amd 0000:00:04.0: setting latency timer to 64
[ 1.314960] scsi6 : pata_amd
[ 1.315022] scsi7 : pata_amd
[ 1.315368] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.315370] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.340036] usb 2-7: new full speed USB device number 2 using ohci_hcd
[ 1.448108] firewire_core: created device fw0: GUID 001d7d5600f07450, S400
[ 1.484289] ata7.00: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66
[ 1.484402] ata7.01: HPA detected: current 312579695, native 312581808
[ 1.484405] ata7.01: ATA-7: SAMSUNG SP1613N, VB100-41, max UDMA/100
[ 1.484408] ata7.01: 312579695 sectors, multi 16: LBA48
[ 1.484414] ata7: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 1.484418] ata7: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 1.500219] ata7.00: configured for UDMA/33
[ 1.532278] ata7.01: configured for UDMA/33
[ 1.624093] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.780043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.780047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.788266] ata3.00: HPA detected: current 488395055, native 488397168
[ 1.788270] ata3.00: ATA-7: ST3250310AS, 3.AAA, max UDMA/133
[ 1.788272] ata3.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.796604] ata1.00: HPA detected: current 625140335, native 625142448
[ 1.796608] ata1.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
[ 1.796610] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.804223] ata3.00: configured for UDMA/133
[ 1.812735] ata1.00: configured for UDMA/133
[ 1.812907] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 1.813073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.813181] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.813218] sd 0:0:0:0: [sda] Write Protect is off
[ 1.813220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.813235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831444] sda: sda1 sda2 < sda5 >
[ 1.831693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.848035] usb 2-8: new full speed USB device number 3 using ohci_hcd
[ 2.097264] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input2
[ 2.097346] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-8/input0
[ 2.104549] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.1/input/input3
[ 2.104652] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8/input1
[ 2.104663] usbcore: registered new interface driver usbhid
[ 2.104665] usbhid: USB HID core driver
[ 2.284034] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.307251] ata2.00: HPA detected: current 312579695, native 312581808
[ 2.307256] ata2.00: ATA-7: WDC WD1600JS-19NCB1, 10.02E01, max UDMA/133
[ 2.307258] ata2.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.312248] ata2.00: configured for UDMA/133
[ 2.312411] scsi 1:0:0:0: Direct-Access ATA WDC WD1600JS-19N 10.0 PQ: 0 ANSI: 5
[ 2.312529] sd 1:0:0:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 2.312561] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.312569] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.312571] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.312588] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.312680] scsi 2:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5
[ 2.312770] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.312827] sd 2:0:0:0: [sdc] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 2.312864] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.312866] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.312900] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.328245] sdc: sdc1 < sdc5 >
[ 2.328537] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.343532] sdb: sdb1 sdb2 < sdb5 > sdb3
[ 2.343744] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.624028] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.936022] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.936982] scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5
[ 2.938245] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.938248] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.938366] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.938435] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 2.938983] scsi 6:0:1:0: Direct-Access ATA SAMSUNG SP1613N VB10 PQ: 0 ANSI: 5
[ 2.939080] sd 6:0:1:0: Attached scsi generic sg4 type 0
[ 2.939084] sd 6:0:1:0: [sdd] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 2.939137] sd 6:0:1:0: [sdd] Write Protect is off
[ 2.939140] sd 6:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.939149] ata8: port disabled. ignoring.
[ 2.939157] sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.953887] sdd: sdd2 < sdd5 >
[ 2.954163] sd 6:0:1:0: [sdd] Attached SCSI disk
[ 3.825214] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[ 3.825217] EXT4-fs (sdb1): write access will be enabled during recovery
[ 4.013668] EXT4-fs (sdb1): recovery complete
[ 4.014093] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.977998] udevd[447]: starting version 173
[ 13.030459] Adding 5297148k swap on /dev/sdb3. Priority:-1 extents:1 across:5297148k
[ 13.043502] lp: driver loaded but no devices found
[ 13.095277] i2c i2c-3: nForce2 SMBus adapter at 0x1c00
[ 13.095298] i2c i2c-4: nForce2 SMBus adapter at 0x1c80
[ 13.095766] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 13.095865] NV_TCO: Watchdog reboot not detected.
[ 13.095951] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 13.134406] parport_pc 00:08: reported by Plug and Play ACPI
[ 13.134452] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 13.203968] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 13.233467] lp0: using parport0 (interrupt-driven).
[ 13.355381] type=1400 audit(1342341858.156:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=764 comm="apparmor_parser"
[ 13.355741] type=1400 audit(1342341858.156:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=764 comm="apparmor_parser"
[ 13.355974] type=1400 audit(1342341858.156:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=764 comm="apparmor_parser"
[ 13.577495] Linux video capture interface: v2.00
[ 13.589219] gspca: v2.13.0 registered
[ 13.608143] input: pac7302 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/input/input4
[ 13.608285] usbcore: registered new interface driver pac7302
[ 13.637365] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 13.654547] MCE: In-kernel MCE decoding enabled.
[ 13.655289] EDAC MC: Ver: 2.1.0
[ 13.668719] AMD64 EDAC driver v3.4.0
[ 13.669078] EDAC amd64: DRAM ECC disabled.
[ 13.669089] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 13.669090] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 13.669091] (Note that use of the override may cause unknown side effects.)
[ 13.721032] forcedeth 0000:00:08.0: irq 41 for MSI/MSI-X
[ 13.863852] init: failsafe main process (946) killed by TERM signal
[ 13.902019] type=1400 audit(1342341858.704:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1011 comm="apparmor_parser"
[ 13.906906] type=1400 audit(1342341858.708:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
[ 13.912491] type=1400 audit(1342341858.716:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1012 comm="apparmor_parser"
[ 13.912737] type=1400 audit(1342341858.716:
: apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1012 comm="apparmor_parser"
[ 13.923847] type=1400 audit(1342341858.724:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1014 comm="apparmor_parser"
[ 13.942047] type=1400 audit(1342341858.744:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1014 comm="apparmor_parser"
[ 13.946958] type=1400 audit(1342341858.748:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1020 comm="apparmor_parser"
[ 14.153404] init: apport pre-start process (1137) terminated with status 1
[ 14.177694] init: apport post-stop process (1172) terminated with status 1
Тема: Не загружается Ubuntu 11.10 после установки (Прочитано 3684 раз)
