Тормозит при загрузке

[TaTur]

Всем доброго времени суток.Поставил с нуля Ubuntu 12.10, и при загрузке творится не понятное, а именно, иногда загрузка происходит быстро иногда медленно, причем в обоих случаях ничего не устанавливаю, изменений в систему не вношу. Складывается впечатление, что загрузка в ,случае медленного запуска, просто берет паузу, потому как даже не происходит обращение к жесткому, и так пару минут, затем, индикатор HDD моргает и все быстро загружается. В быстром варианте, все тоже самое, только без таймаута? Что за мистика?

[denkin]

после "затрудненной" загрузки в терминале выполнить:

Код: [Выделить]

dmesg и результат выложить сюда под спойлер, попробуем разобраться. Можно заодно выложить файл /var/log/dmesg

[TaTur]

В общем вот:

(Нажмите, чтобы показать/скрыть)

[  150.124955] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[  150.124970] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  150.125126] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[  150.135575] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, AS01, max UDMA/100
[  150.135584] ata2.00: applying bridge limits
[  150.150297] ata2.00: configured for UDMA/100
[  150.204924]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[  150.205411] sd 0:0:0:0: >[sda] Attached SCSI disk
[  150.208557] scsi 1:0:0:0: >CD-ROM            TSSTcorp CDDVDW TS-L633C  AS01 PQ: 0 ANSI: 5
[  150.214234] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  150.214243] cdrom: Uniform CD-ROM driver Revision: 3.20
[  150.214378] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[  150.214443] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[  150.214548] Freeing unused kernel memory: 756k freed
[  150.214790] Write protecting the kernel text: 5960k
[  150.214809] Write protecting the kernel read-only data: 2424k
[  150.214812] NX-protecting the kernel data: 4280k
[  150.234776] udevd[97]: starting version 175
[  150.241218] usb 4-1: >new low-speed USB device number 2 using ohci_hcd
[  150.313773] sdhci: Secure Digital Host Controller Interface driver
[  150.313781] sdhci: Copyright(c) Pierre Ossman
[  150.314030] sdhci-pci 0000:05:00.0: >SDHCI controller found [197b:2382] (rev 80)
[  150.314090] mmc0: no vmmc regulator found
[  150.314126] Registered led device: mmc0::
[  150.318635] jme: JMicron JMC2XX ethernet driver version 1.0.8
[  150.345204] mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
[  150.345236] sdhci-pci 0000:05:00.2: >SDHCI controller found [197b:2381] (rev 80)
[  150.345258] sdhci-pci 0000:05:00.2: >Refusing to bind to secondary interface.
[  150.346169] jme 0000:05:00.5: >eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:20:cf:30:55:2c:f2
[  150.410817] usb 4-1: >New USB device found, idVendor=09da, idProduct=0006
[  150.410826] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  150.410832] usb 4-1: >Product: USB Optical Mouse
[  150.410837] usb 4-1: >Manufacturer: A4Tech
[  150.422883] usbcore: registered new interface driver usbhid
[  150.422891] usbhid: USB HID core driver
[  150.425117] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input5
[  150.425252] a4tech 0003:09DA:0006.0001: >input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[  150.525063] usb 2-2: >new high-speed USB device number 2 using ehci_hcd
[  150.692073] usb 2-2: >New USB device found, idVendor=13d3, idProduct=5130
[  150.692082] usb 2-2: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  150.692088] usb 2-2: >Product: USB 2.0 Camera
[  150.692093] usb 2-2: >Manufacturer: Sonix Technology Co., Ltd.
[  151.068635] usb 5-4: >new full-speed USB device number 2 using ohci_hcd
[  151.243195] usb 5-4: >New USB device found, idVendor=0b05, idProduct=1788
[  151.243204] usb 5-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  151.243210] usb 5-4: >Product: BT-270
[  151.243214] usb 5-4: >Manufacturer: Broadcom Corp
[  151.243218] usb 5-4: >SerialNumber: 1C4BD61D72F8
[  152.900796] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[  152.900805] EXT4-fs (sda7): write access will be enabled during recovery
[  154.799759] EXT4-fs (sda7): recovery complete
[  154.807667] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[  181.162852] Adding 3145500k swap on /dev/sda6.  Priority:-1 extents:1 across:3145500k
[  181.170124] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  181.210043] udevd[364]: starting version 175
[  181.258415] lp: driver loaded but no devices found
[  181.287064] asus_laptop: Asus Laptop Support version 0.42
[  181.287252] asus_laptop: BSTS called, 0xff7f returned
[  181.317728] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  181.317732] Disabling lock debugging due to kernel taint
[  181.332304] cfg80211: Calling CRDA to update world regulatory domain
[  181.335698] [fglrx] Maximum main memory to use for locked dma buffers: 2870 MBytes.
[  181.335943] [fglrx]   vendor: 1002 device: 68e0 count: 1
[  181.336326] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[  181.287359] asus_laptop:   HWRS returned 180
[  181.350575] asus_laptop: Backlight controlled by ACPI video driver
[  181.350661] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
[  181.358664] [fglrx] Kernel PAT support is enabled
[  181.358687] [fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
[  181.428703] ath: EEPROM regdomain: 0x8283
[  181.428707] ath: EEPROM indicates we should expect a country code
[  181.428709] ath: doing EEPROM country->regdmn map search
[  181.428711] ath: country maps to regdmn code: 0x3
[  181.428712] ath: Country alpha2 being used: RU
[  181.428713] ath: Regpair used: 0x3
[  181.428866] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  181.428868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428870] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  181.428872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428873] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  181.428875] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428876] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  181.428878] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428879] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  181.428881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428882] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  181.428884] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428885] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  181.428887] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428888] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  181.428889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428891] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  181.428892] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428894] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  181.428895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428896] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  181.428898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.428899] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[  181.428901] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[  181.428902] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[  181.430805] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  181.430807] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430809] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  181.430810] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430812] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  181.430813] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430815] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  181.430816] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430818] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  181.430819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430821] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  181.430822] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430824] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  181.430825] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430827] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  181.430828] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430830] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  181.430831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430833] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  181.430834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430835] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  181.430837] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  181.430839] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  181.430840] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[  181.430842] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  181.430843] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[  181.430845] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  181.430846] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[  181.450650] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[  181.451183] cfg80211: Pending regulatory request, waiting for it to be processed...
[  181.451224] Registered led device: ath9k-phy0
[  181.451230] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xf85c0000, irq=16
[  181.454968] Bluetooth: Core ver 2.16
[  181.454991] NET: Registered protocol family 31
[  181.454992] Bluetooth: HCI device and connection manager initialized
[  181.454995] Bluetooth: HCI socket layer initialized
[  181.454996] Bluetooth: L2CAP socket layer initialized
[  181.455000] Bluetooth: SCO socket layer initialized
[  181.466202] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SBSM 1 (20120320/utaddress-251)
[  181.466212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  181.466449] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[  181.466552] sp5100_tco: mmio address 0xb8fe00 already in use
[  181.482781] ACPI Warning: _BQC returned an invalid level (20120320/video-480)
[  181.489633] usbcore: registered new interface driver btusb
[  181.519289] Linux video capture interface: v2.00
[  181.528539] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5130)
[  181.540367] acpi device:40: >registered as cooling_device2
[  181.540569] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  181.540616] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3d/LNXVIDEO:00/input/input7
[  181.544282] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8
[  181.544810] usbcore: registered new interface driver uvcvideo
[  181.544812] USB Video Class driver (1.1.1)
[  181.565988] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[  181.575466] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[  181.576268] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[  181.576339] snd_hda_intel 0000:01:00.1: >irq 44 for MSI/MSI-X
[  181.601137] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[  181.624693] microcode: CPU0: patch_level=0x010000b6
[  181.727299] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  181.727303] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727305] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  181.727307] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727309] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  181.727310] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727312] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  181.727313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727326] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  181.727327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727329] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  181.727330] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727332] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  181.727333] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727335] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  181.727337] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727338] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  181.727340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727341] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  181.727343] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727344] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  181.727346] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727347] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  181.727349] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  181.727351] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  181.727352] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  181.727354] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  181.727355] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  181.727358] cfg80211: World regulatory domain updated:
[  181.727360] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  181.727361] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727363] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  181.727365] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  181.727366] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727368] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.727376] cfg80211: Calling CRDA for country: RU
[  181.751047] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[  181.763240] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  181.763245] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763247] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  181.763249] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763250] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  181.763252] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763253] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  181.763255] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763256] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  181.763258] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763259] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  181.763260] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763262] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  181.763263] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763265] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  181.763266] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763268] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  181.763269] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763270] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  181.763272] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763273] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  181.763275] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763276] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  181.763278] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763279] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  181.763280] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.763282] cfg80211: Disabling freq 2484 MHz
[  181.763285] cfg80211: Regulatory domain changed to country: RU
[  181.763286] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  181.763287] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  181.763289] cfg80211:   (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[  181.800257] microcode: failed to load file amd-ucode/microcode_amd.bin
[  181.800271] microcode: CPU1: patch_level=0x010000b6
[  181.801899] microcode: failed to load file amd-ucode/microcode_amd.bin
[  181.802018] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[  181.808376] kvm: Nested Virtualization enabled
[  181.808380] kvm: Nested Paging enabled
[  181.828635] init: failsafe main process (820) killed by TERM signal
[  182.087260] ppdev: user-space parallel port driver
[  182.098789] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  182.098792] Bluetooth: BNEP filters: protocol multicast
[  182.106398] Bluetooth: RFCOMM TTY layer initialized
[  182.106404] Bluetooth: RFCOMM socket layer initialized
[  182.106405] Bluetooth: RFCOMM ver 1.11
[  182.157449] psmouse serio4: >elantech: assuming hardware version 2 (with firmware version 0x040102)
[  182.192146] psmouse serio4: >elantech: Synaptics capabilities query result 0x78, 0x16, 0x0d.
[  182.295998] type=1400 audit(1351103711.954:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=928 comm="apparmor_parser"
[  182.296215] type=1400 audit(1351103711.958:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=930 comm="apparmor_parser"
[  182.296399] type=1400 audit(1351103711.958:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=928 comm="apparmor_parser"
[  182.296749] type=1400 audit(1351103711.958:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=930 comm="apparmor_parser"
[  182.298867] type=1400 audit(1351103711.958:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=929 comm="apparmor_parser"
[  182.299274] type=1400 audit(1351103711.958:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=929 comm="apparmor_parser"
[  182.300725] type=1400 audit(1351103711.962:: apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=937 comm="apparmor_parser"
[  182.302087] type=1400 audit(1351103711.962:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=937 comm="apparmor_parser"
[  182.306521] type=1400 audit(1351103711.966:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=938 comm="apparmor_parser"
[  182.335009] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[  182.349165] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  182.352420] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  182.354152] jme 0000:05:00.5: >irq 45 for MSI/MSI-X
[  182.376674] jme 0000:05:00.5: >eth0: Link is down
[  182.376904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  182.377241] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  183.917687] wlan0: authenticate with 00:26:5a:a1:66:ac
[  183.924018] wlan0: send auth to 00:26:5a:a1:66:ac (try 1/3)
[  183.929714] wlan0: authenticated
[  183.935963] wlan0: associating with AP with corrupt beacon
[  183.938862] wlan0: associate with 00:26:5a:a1:66:ac (try 1/3)
[  183.942817] wlan0: RX AssocResp from 00:26:5a:a1:66:ac (capab=0xc31 status=0 aid=1)
[  183.942895] wlan0: associated
[  183.943110] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  183.943515] cfg80211: Calling CRDA for country: GB
[  183.947610] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  183.947614] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947616] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  183.947618] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947619] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  183.947621] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947622] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  183.947624] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947625] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  183.947627] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947628] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  183.947630] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947631] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  183.947633] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947634] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  183.947635] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947637] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  183.947638] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947640] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  183.947641] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947643] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  183.947644] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947645] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  183.947647] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947649] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  183.947650] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  183.947651] cfg80211: Disabling freq 2484 MHz
[  183.947673] cfg80211: Regulatory domain changed to country: GB
[  183.947674] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  183.947676] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  183.947678] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  183.947679] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  183.947680] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  186.241462] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[  186.241465] vesafb: scrolling: redraw
[  186.241468] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[  186.242154] vesafb: framebuffer at 0xd0000000, mapped to 0xf8f00000, using 3072k, total 3072k
[  186.242304] Console: switching to colour frame buffer device 128x48
[  186.245994] fb0: VESA VGA frame buffer device
[  186.297001] init: plymouth-splash main process (1398) terminated with status 1
[  191.281823] fglrx_pci 0000:01:00.0: >irq 46 for MSI/MSI-X
[  191.283583] [fglrx] Firegl kernel thread PID: 2560
[  191.283672] [fglrx] Firegl kernel thread PID: 2563
[  191.283764] [fglrx] Firegl kernel thread PID: 2564
[  191.283961] [fglrx] IRQ 46 Enabled
[  191.296713] [fglrx] Gart USWC size:944 M.
[  191.296715] [fglrx] Gart cacheable size:373 M.
[  191.296719] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[  191.296721] [fglrx] Reserved FB block: Unshared offset:fa0a000, size:2f6000
[  191.296723] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000

[denkin]

TaTur,
обновления делали? Если что, в терминале:

Код: [Выделить]

sudo apt-get updateEnter, затем ввести пароль (он не будет отображаться), Enter, дождаться завершения процесса, затем:

Код: [Выделить]

sudo apt-get upgradeEnter, и дождаться завершения. Перезагрузиться.

[ii343hbka]

скорее всего просто fsck диск проверяет
почему так долго - хз
и не знаю, раз так долго, то стоит ли отключать проверку

[vasyl]

sudo apt-get install bootchart ?

[TaTur]

В общем вот bootchart
Пользователь решил продолжить мысль 25 Октября 2012, 14:28:01:Диаграмма bootchart - http://onemove.ru/hB
Пользователь решил продолжить мысль 25 Октября 2012, 22:02:28:

скорее всего просто fsck диск проверяет
почему так долго - хз
и не знаю, раз так долго, то стоит ли отключать проверку

Насчет проблемы с диском или того, что проверка диска как то проходит не понятным образом, могу сказать только одно до этого стояла бубнта 12.04, проблем не было, после чистой установки именно 12.10 начались сюрпризы

[ii343hbka]

а покажите пожалуйста

Код: [Выделить]

cat /etc/default/grub
а то такое ощущение, что 150 секунд тупо граб висит и не передает управление

[TaTur]

а покажите пожалуйста

Код: [Выделить]

cat /etc/default/grub
а то такое ощущение, что 150 секунд тупо граб висит и не передает управление

Вот и я о том же, что grub чего висит и ждет не понятно, вот моя граба, но там нет ничего

GRUB_DEFAULT="saved"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

[victor00000]

GRUB_TIMEOUT="10" секунд, у меня один сек

[TaTur]

10 секунд это чтобы винду успеть выбрать, а вот то что сам загрузчик думает долго перед тем начать грузить это интересно!

[ii343hbka]

у меня GRUB_DEFAULT=0


можно еще попробовать
GRUB_HIDDEN_TIMEOUT="2"
GRUB_HIDDEN_TIMEOUT_QUIET="false"
и попробовать ручками загрузиться

[TaTur]

В общем вот bootchart при нормальной загрузке http://onemove.ru/hf

[denkin]

TaTur,
в чем косяк был? как решилось?

[TaTur]

да никак не решилось(((, я ж говорю, когда нормально грузится, когда берет таймаут, непонятна закономерность