Спасибо, ребята, но перетаскивать просто нечего было. Нельзя было выбрать английский, т.к. его там просто не было. Я чудом смог восстановить все, сам не знаю, как получилось.))
Расскажу, как все было, может кому поможет в будущем.
зашел в system settings -> language support, хотя приходилось все делать по памяти или на угад т.к. все на китайском.
в открывшемся окне я че-то нажимал, и по видимому, удалил окончательно какие-то библиотеки.
Чтоб выйти из неприятной ситуации, в терминале набрал sudo apt-get install (Tab) и искал любую библиотеку, которая как то по названию связана с английским языком (en-, language-, ...).
нашел библиотеку с название gnudatalanguage
набрал:
sudo apt-get install gnudatalanguage
вот результат выполнения:
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-3.2.0-31 linux-headers-3.2.0-29
linux-headers-3.2.0-29-generic-pae linux-headers-3.2.0-31-generic-pae
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
imagemagick-common libblas3gf libcsiro0 libfftw3-3 libgfortran3
libgrib-api-1.9.9 libgsl0ldbl libhdf4-0-alt libhdf5-serial-1.8.4
liblapack3gf liblqr-1-0 libmagick++4 libmagickcore4 libmagickwand4
libnetcdf6 libplplot-c++10 libplplot11 libqhull5 libqsastime0 libudunits2-0
libwxbase2.8-0 libwxgtk2.8-0 pslib1 python-numpy
Suggested packages:
libfftw3-dev gsl-ref-psdoc gsl-doc-pdf gsl-doc-info gsl-ref-html libhdf4-doc
libhdf4-alt-dev hdf4-tools libnetcdf4 libmagickcore4-extra
plplot11-driver-xwin plplot11-driver-gd plplot11-driver-cairo
plplot11-driver-qt plplot11-driver-wxwidgets plplot11-tcl
libgnomeprintui2.2-0 python-numpy-doc python-numpy-dbg python-nose
python-dev gfortran
Recommended packages:
plplot9-driver-xwin
The following NEW packages will be installed:
gnudatalanguage imagemagick-common libblas3gf libcsiro0 libfftw3-3
libgfortran3 libgrib-api-1.9.9 libgsl0ldbl libhdf4-0-alt
libhdf5-serial-1.8.4 liblapack3gf liblqr-1-0 libmagick++4 libmagickcore4
libmagickwand4 libnetcdf6 libplplot-c++10 libplplot11 libqhull5 libqsastime0
libudunits2-0 libwxbase2.8-0 libwxgtk2.8-0 pslib1 python-numpy
0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
Need to get 6820 kB/21.6 MB of archives.
After this operation, 70.0 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ua.archive.ubuntu.com/ubuntu/ precise-updates/main libmagickwand4 i386 8:6.6.9.7-5ubuntu3.2 [320 kB]
Get:2 http://ua.archive.ubuntu.com/ubuntu/ precise-updates/main libmagick++4 i386 8:6.6.9.7-5ubuntu3.2 [139 kB]
Get:3 http://ua.archive.ubuntu.com/ubuntu/ precise/universe libnetcdf6 i386 1:4.1.1-6 [495 kB]
Get:4 http://ua.archive.ubuntu.com/ubuntu/ precise/universe libqsastime0 i386 5.9.9-2ubuntu2 [18.2 kB]
Get:5 http://ua.archive.ubuntu.com/ubuntu/ precise/universe libplplot11 i386 5.9.9-2ubuntu2 [466 kB]
Get:6 http://ua.archive.ubuntu.com/ubuntu/ precise/universe libplplot-c++10 i386 5.9.9-2ubuntu2 [24.0 kB]
Get:7 http://ua.archive.ubuntu.com/ubuntu/ precise/universe pslib1 i386 0.4.5-2ubuntu1 [95.2 kB]
Get:8 http://ua.archive.ubuntu.com/ubuntu/ precise/main python-numpy i386 1:1.6.1-6ubuntu1 [1839 kB]
Get:9 http://ua.archive.ubuntu.com/ubuntu/ precise/universe libhdf4-0-alt i386 4.2r4-12build1 [290 kB]
Get:10 http://ua.archive.ubuntu.com/ubuntu/ precise/universe gnudatalanguage i386 0.9.2-2 [3133 kB]
Fetched 6820 kB in 1min 6s (103 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "zh_CN:en",
LC_ALL = (unset),
LC_TIME = "en_US.UTF-8",
LC_MONETARY = "en_US.UTF-8",
LC_ADDRESS = "en_US.UTF-8",
LC_TELEPHONE = "en_US.UTF-8",
LC_NAME = "en_US.UTF-8",
LC_MEASUREMENT = "en_US.UTF-8",
LC_IDENTIFICATION = "en_US.UTF-8",
LC_NUMERIC = "en_US.UTF-8",
LC_PAPER = "en_US.UTF-8",
LANG = "zh_CN.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
Selecting previously unselected package libgfortran3.
(Reading database ... 280219 files and directories currently installed.)
Unpacking libgfortran3 (from .../libgfortran3_4.6.3-1ubuntu5_i386.deb) ...
Selecting previously unselected package libudunits2-0.
Unpacking libudunits2-0 (from .../libudunits2-0_2.1.23-3_i386.deb) ...
Selecting previously unselected package libwxbase2.8-0.
Unpacking libwxbase2.8-0 (from .../libwxbase2.8-0_2.8.12.1-6ubuntu2_i386.deb) ...
Selecting previously unselected package libwxgtk2.8-0.
Unpacking libwxgtk2.8-0 (from .../libwxgtk2.8-0_2.8.12.1-6ubuntu2_i386.deb) ...
Selecting previously unselected package imagemagick-common.
Unpacking imagemagick-common (from .../imagemagick-common_8%3a6.6.9.7-5ubuntu3.2_all.deb) ...
Selecting previously unselected package libblas3gf.
Unpacking libblas3gf (from .../libblas3gf_1.2.20110419-2ubuntu1_i386.deb) ...
Selecting previously unselected package libqhull5.
Unpacking libqhull5 (from .../libqhull5_2009.1-3ubuntu1_i386.deb) ...
Selecting previously unselected package libcsiro0.
Unpacking libcsiro0 (from .../libcsiro0_5.9.9-2ubuntu2_i386.deb) ...
Selecting previously unselected package libfftw3-3.
Unpacking libfftw3-3 (from .../libfftw3-3_3.3-1ubuntu1_i386.deb) ...
Selecting previously unselected package libgrib-api-1.9.9.
Unpacking libgrib-api-1.9.9 (from .../libgrib-api-1.9.9_1.9.9-3_i386.deb) ...
Selecting previously unselected package libgsl0ldbl.
Unpacking libgsl0ldbl (from .../libgsl0ldbl_1.15+dfsg-1build1_i386.deb) ...
Selecting previously unselected package libhdf5-serial-1.8.4.
Unpacking libhdf5-serial-1.8.4 (from .../libhdf5-serial-1.8.4_1.8.4-patch1-3ubuntu2_i386.deb) ...
Selecting previously unselected package liblapack3gf.
Unpacking liblapack3gf (from .../liblapack3gf_3.3.1-1_i386.deb) ...
Selecting previously unselected package liblqr-1-0.
Unpacking liblqr-1-0 (from .../liblqr-1-0_0.4.1-1.1_i386.deb) ...
Selecting previously unselected package libmagickcore4.
Unpacking libmagickcore4 (from .../libmagickcore4_8%3a6.6.9.7-5ubuntu3.2_i386.deb) ...
Selecting previously unselected package libmagickwand4.
Unpacking libmagickwand4 (from .../libmagickwand4_8%3a6.6.9.7-5ubuntu3.2_i386.deb) ...
Selecting previously unselected package libmagick++4.
Unpacking libmagick++4 (from .../libmagick++4_8%3a6.6.9.7-5ubuntu3.2_i386.deb) ...
Selecting previously unselected package libnetcdf6.
Unpacking libnetcdf6 (from .../libnetcdf6_1%3a4.1.1-6_i386.deb) ...
Selecting previously unselected package libqsastime0.
Unpacking libqsastime0 (from .../libqsastime0_5.9.9-2ubuntu2_i386.deb) ...
Selecting previously unselected package libplplot11.
Unpacking libplplot11 (from .../libplplot11_5.9.9-2ubuntu2_i386.deb) ...
Selecting previously unselected package libplplot-c++10.
Unpacking libplplot-c++10 (from .../libplplot-c++10_5.9.9-2ubuntu2_i386.deb) ...
Selecting previously unselected package pslib1.
Unpacking pslib1 (from .../pslib1_0.4.5-2ubuntu1_i386.deb) ...
Selecting previously unselected package python-numpy.
Unpacking python-numpy (from .../python-numpy_1%3a1.6.1-6ubuntu1_i386.deb) ...
Selecting previously unselected package libhdf4-0-alt.
Unpacking libhdf4-0-alt (from .../libhdf4-0-alt_4.2r4-12build1_i386.deb) ...
Selecting previously unselected package gnudatalanguage.
Unpacking gnudatalanguage (from .../gnudatalanguage_0.9.2-2_i386.deb) ...
Processing triggers for install-info ...
/etc/environment: line 2: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8)
/etc/environment: line 3: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8)
/etc/default/locale: line 2: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8)
/etc/default/locale: line 3: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8)
Processing triggers for man-db ...
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up libgfortran3 (4.6.3-1ubuntu5) ...
Setting up libudunits2-0 (2.1.23-3) ...
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libblas3gf (1.2.20110419-2ubuntu1) ...
update-alternatives: using /usr/lib/libblas/libblas.so.3gf to provide /usr/lib/libblas.so.3gf (libblas.so.3gf) in auto mode.
Setting up libqhull5 (2009.1-3ubuntu1) ...
Setting up libcsiro0 (5.9.9-2ubuntu2) ...
Setting up libfftw3-3 (3.3-1ubuntu1) ...
Setting up libgrib-api-1.9.9 (1.9.9-3) ...
Setting up libgsl0ldbl (1.15+dfsg-1build1) ...
Setting up libhdf5-serial-1.8.4 (1.8.4-patch1-3ubuntu2) ...
Setting up liblapack3gf (3.3.1-1) ...
locale: Cannot set LC_ALL to default locale: No such file or directory
update-alternatives: using /usr/lib/lapack/liblapack.so.3gf to provide /usr/lib/liblapack.so.3gf (liblapack.so.3gf) in auto mode.
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagick++4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetcdf6 (1:4.1.1-6) ...
Setting up libqsastime0 (5.9.9-2ubuntu2) ...
Setting up libplplot11 (5.9.9-2ubuntu2) ...
Setting up libplplot-c++10 (5.9.9-2ubuntu2) ...
Setting up pslib1 (0.4.5-2ubuntu1) ...
Setting up python-numpy (1:1.6.1-6ubuntu1) ...
Setting up libhdf4-0-alt (4.2r4-12build1) ...
Setting up gnudatalanguage (0.9.2-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
~$
после перезагрузки компьютера системные настройки восстановились, но браузер еще остался на китайском. опять зашел в system settings -> language support и уже смог выбрать английский язык. презагрузил и все в порядке.
Тема: Я не понимаю по китайски!!! (Прочитано 1309 раз)
