Использую Ubuntu 12.10,после успешной установке драйверов
http://support.amd.com/us/gpudownload/linux/legacy/Pages/legacy-radeon_linux.aspx для видеокарты atiHD2600xt монитор находиться в разрешении 1280x1024 при частоте 60гц, а должен 1440х900х75Гц.
Возможно это связано с конфигурацией xorf.cong, поэтому я выкладую ниже файл xorg.conf
$xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 0.0*
1152x864 0.0
1024x768 0.0
800x600 0.0
640x480 0.0
720x400 0.0
файл xorg.cong
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
VertRefresh 60.0 - 75.0
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Также незнаю почему,но не запускаеться Catalyst Center
пишет что типа неправильные драйвера или неправильно настроеная система,хотя я переставлял драйвера 3 раза версии 12.2, 13.1 и 13.4
Ошибка при запуске Catalyst Center
Initialization error
There was a problem initializing Catalyst Control Center Linux edition it could be caused by the following.
No AMD graphics driver in installed, or the Amd driver is not functioning properly.
Please install the AMD driver appropriate for you AMD hardware,or configure using aticonfig
В чем может быть дело?
Листинги и содержимое текстовых файлов следует добавлять в сообщение с помощью тега [spoiler]...[/spoiler]
,
либо прикреплять к сообщению в виде отдельного файла.
--HP