Настройка параметров выключения экрана (Ubuntu 13.04)

[ferty]

Ubuntu 13.04-unity. Вначале после запуска ОС всё хорошо, но после того как экран тухнет(в настройках экрана оставил параметр выключить при бездействии 10 мин) система начинает конкретно виснуть, причём зависает всё - от браузера до звука в системе. Системный монитор показывает что больше всего процессор нагружает Xorg. Видеокарта AMD 7520g+7670m. Пробовал разное - в начале ноутбук работал на свободных драйверах, но тогда кроме зависов бук ещё шумит как бешенный и греетеся. Потом поставил Catalyst 13.4 грется перестал, шуметь тоже, но, как выше сказано, ОС мёрзнет почти намертво. Ставил ядро 3.9.3,  ситуация такая же как на 3.8.21. Вот содержимое /var/log/Xorg.0.log после зависания системы:

(Нажмите, чтобы показать/скрыть)

X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 26.640] X Protocol Version 11, Revision 0
[ 26.640] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 26.640] Current Operating System: Linux leto-pc 3.9.3-030903-generic #201305191535 SMP Sun May 19 19:35:54 UTC 2013 x86_64
[ 26.640] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.3-030903-generic root=UUID=11efca45-6809-4e57-9627-60e27d3e2345 ro quiet splash vt.handoff=7
[ 26.640] Build Date: 17 April 2013 10:43:13PM
[ 26.640] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[ 26.640] Current version of pixman: 0.28.2
[ 26.640] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.640] Markers: (--) probed, (**) from config file, (= default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.640] (= Log file: "/var/log/Xorg.0.log", Time: Fri May 24 19:27:04 2013
[ 26.723] (= Using config file: "/etc/X11/xorg.conf"
[ 26.723] (= Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.856] (= ServerLayout "aticonfig Layout"
[ 26.856] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 26.856] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 26.856] (**) | |-->Device "aticonfig-Device[0]-0"
[ 26.856] (= Automatically adding devices
[ 26.856] (= Automatically enabling devices
[ 26.856] (= Automatically adding GPU devices
[ 26.994] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 26.994] Entry deleted from font path.
[ 26.994] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 26.994] Entry deleted from font path.
[ 26.994] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 26.994] Entry deleted from font path.
[ 27.009] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 27.009] Entry deleted from font path.
[ 27.009] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 27.009] Entry deleted from font path.
[ 27.009] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.009] Entry deleted from font path.
[ 27.009] (= FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 27.009] (= ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 27.009] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.032] (II) Loader magic: 0x7f3ebbceed20
[ 27.032] (II) Module ABI versions:
[ 27.032] X.Org ANSI C Emulation: 0.4
[ 27.032] X.Org Video Driver: 13.1
[ 27.032] X.Org XInput driver : 18.0
[ 27.032] X.Org Server Extension : 7.0
[ 27.033] (--) PCI:*(0:0:1:0) 1002:9990:144d:c0da rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 27.033] (--) PCI: (0:1:0:0) 1002:6840:144d:c0da rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x??/131072
[ 27.034] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.057] Initializing built-in extension Generic Event Extension
[ 27.057] Initializing built-in extension SHAPE
[ 27.057] Initializing built-in extension MIT-SHM
[ 27.057] Initializing built-in extension XInputExtension
[ 27.057] Initializing built-in extension XTEST
[ 27.057] Initializing built-in extension BIG-REQUESTS
[ 27.057] Initializing built-in extension SYNC
[ 27.057] Initializing built-in extension XKEYBOARD
[ 27.057] Initializing built-in extension XC-MISC
[ 27.057] Initializing built-in extension SECURITY
[ 27.057] Initializing built-in extension XINERAMA
[ 27.057] Initializing built-in extension XFIXES
[ 27.057] Initializing built-in extension RENDER
[ 27.057] Initializing built-in extension RANDR
[ 27.057] Initializing built-in extension COMPOSITE
[ 27.058] Initializing built-in extension DAMAGE
[ 27.058] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.058] Initializing built-in extension DOUBLE-BUFFER
[ 27.058] Initializing built-in extension RECORD
[ 27.058] Initializing built-in extension DPMS
[ 27.058] Initializing built-in extension X-Resource
[ 27.058] Initializing built-in extension XVideo
[ 27.058] Initializing built-in extension XVideo-MotionCompensation
[ 27.058] Initializing built-in extension SELinux
[ 27.058] Initializing built-in extension XFree86-VidModeExtension
[ 27.058] Initializing built-in extension XFree86-DGA
[ 27.058] Initializing built-in extension XFree86-DRI
[ 27.058] Initializing built-in extension DRI2
[ 27.058] (II) "glx" will be loaded by default.
[ 27.058] (II) LoadModule: "glx"
[ 27.277] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.356] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 27.356] compiled for 6.9.0, module version = 1.0.0
[ 27.356] Loading extension GLX
[ 27.356] (II) LoadModule: "fglrx"
[ 27.357] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 28.022] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 28.022] compiled for 1.4.99.906, module version = 12.10.5
[ 28.022] Module class: X.Org Video Driver
[ 28.023] (II) Loading sub module "fglrxdrm"
[ 28.023] (II) LoadModule: "fglrxdrm"
[ 28.023] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 28.047] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 28.047] compiled for 1.4.99.906, module version = 12.10.5
[ 28.047] (II) AMD Proprietary Linux Driver Version Identifier:12.10.05
[ 28.047] (II) AMD Proprietary Linux Driver Release Identifier: 12.104
[ 28.047] (II) AMD Proprietary Linux Driver Build Date: Mar 28 2013 21:07:25
[ 28.047] (++) using VT number 7

[ 28.047] (WW) Falling back to old probe method for fglrx
[ 28.113] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 28.134] ukiDynamicMajor: found major device number 250
[ 28.134] ukiDynamicMajor: found major device number 250
[ 28.134] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 28.134] ukiOpenDevice: node name is /dev/ati/card0
[ 28.134] ukiOpenDevice: open result is 10, (OK)
[ 32.812] ukiOpenByBusid: ukiOpenMinor returns 10
[ 32.812] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 32.834] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[ 32.834] (--) Chipset Supported AMD Graphics Processor (0x6840) found
[ 32.873] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 32.873] (**) ChipID override: 0x9990
[ 32.873] (**) Chipset Supported AMD Graphics Processor (0x9990) found
[ 32.874] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 32.944] (II) AMD Video driver is signed
[ 32.945] (II) fglrx(0): pEnt->device->identifier=0x7f3ebdc68ff0
[ 32.945] (II) pEnt->device->identifier=(nil)
[ 32.945] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 32.945] (II) Loading sub module "vgahw"
[ 32.945] (II) LoadModule: "vgahw"
[ 32.946] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 32.955] (II) Module vgahw: vendor="X.Org Foundation"
[ 32.955] compiled for 1.13.3, module version = 0.1.0
[ 32.955] ABI class: X.Org Video Driver, version 13.1
[ 32.955] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 32.955] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 32.955] (= fglrx(0): Default visual is TrueColor
[ 32.955] (**) fglrx(0): Option "DPMS" "true"
[ 32.955] (= fglrx(0): RGB weight 888
[ 32.955] (II) fglrx(0): Using 8 bits per RGB
[ 32.955] (= fglrx(0): Buffer Tiling is ON
[ 32.955] (II) Loading sub module "fglrxdrm"
[ 32.955] (II) LoadModule: "fglrxdrm"
[ 32.955] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 32.955] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 32.955] compiled for 1.4.99.906, module version = 12.10.5
[ 32.957] ukiDynamicMajor: found major device number 250
[ 32.957] ukiDynamicMajor: found major device number 250
[ 32.957] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 32.957] ukiOpenDevice: node name is /dev/ati/card0
[ 32.957] ukiOpenDevice: open result is 14, (OK)
[ 32.957] ukiOpenByBusid: ukiOpenMinor returns 14
[ 32.957] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 32.957] ukiOpenDevice: node name is /dev/ati/card1
[ 33.384] ukiOpenDevice: open result is 14, (OK)
[ 33.384] ukiOpenByBusid: ukiOpenMinor returns 14
[ 33.384] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 33.384] ukiDynamicMajor: found major device number 250
[ 33.384] ukiDynamicMajor: found major device number 250
[ 33.384] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 33.384] ukiOpenDevice: node name is /dev/ati/card0
[ 33.384] ukiOpenDevice: open result is 15, (OK)
[ 33.384] ukiOpenByBusid: ukiOpenMinor returns 15
[ 33.384] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 33.384] (**) fglrx(0): NoAccel = NO
[ 33.384] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 33.384] (--) fglrx(0): Chipset: "AMD Radeon HD 7600M Series" (Chipset = 0x6840)
[ 33.384] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc0da)
[ 33.384] (= fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 33.384] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 33.384] (--) fglrx(0): MMIO registers at 0xfea20000
[ 33.384] (--) fglrx(0): I/O port at 0x0000e000
[ 33.384] (= fglrx(0): ROM-BIOS at 0x000c0000
[ 33.460] (II) fglrx(0): AC Adapter is used
[ 33.460] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 33.460] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 33.460] (II) fglrx(0): PCIE card detected
[ 33.461] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 33.461] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 33.470] (II) fglrx(0): PowerXpress is enabled for AMD platform.
[ 33.470] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc0da)
[ 33.470] (= fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 33.470] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
[ 33.470] (--) fglrx(0): MMIO registers at 0xfeb00000
[ 33.470] (--) fglrx(0): I/O port at 0x0000f000
[ 33.470] (= fglrx(0): ROM-BIOS at 0x000c0000
[ 33.489] (II) fglrx(0): ATIF platform detected
[ 33.489] (II) fglrx(0): AC Adapter is used
[ 33.489] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 33.489] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 33.489] (II) fglrx(0): PCIE card detected
[ 33.489] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 33.489] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 33.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 33.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 33.489] (II) fglrx(0): RandR 1.2 support is enabled!
[ 33.489] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 33.489] (= fglrx(0): Center Mode is disabled
[ 33.489] (II) Loading sub module "fb"
[ 33.489] (II) LoadModule: "fb"
[ 33.490] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33.508] (II) Module fb: vendor="X.Org Foundation"
[ 33.508] compiled for 1.13.3, module version = 1.0.0
[ 33.508] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.508] (II) Loading sub module "ddc"
[ 33.508] (II) LoadModule: "ddc"
[ 33.508] (II) Module "ddc" already built-in
[ 33.679] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 33.679] (II) fglrx(0): Output DFP1 has no monitor section
[ 33.679] (II) fglrx(0): Output CRT1 has no monitor section
[ 33.679] (II) Loading sub module "ddc"
[ 33.679] (II) LoadModule: "ddc"
[ 33.679] (II) Module "ddc" already built-in
[ 33.679] (II) fglrx(0): Connected Display0: LVDS
[ 33.679] (II) fglrx(0): Display0: Failed to get EDID information.
[ 33.679] (II) fglrx(0): EDID for output LVDS
[ 33.679] (II) fglrx(0): Manufacturer: AUO Model: 21ec Serial#: 0
[ 33.679] (II) fglrx(0): Year: 2011 Week: 0
[ 33.680] (II) fglrx(0): EDID Version: 1.4
[ 33.680] (II) fglrx(0): Digital Display Input
[ 33.680] (II) fglrx(0): 6 bits per channel
[ 33.680] (II) fglrx(0): Digital interface is undefined
[ 33.680] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 33.680] (II) fglrx(0): Gamma: 2.20
[ 33.680] (II) fglrx(0): No DPMS capabilities specified
[ 33.680] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 33.680] (II) fglrx(0): First detailed timing is preferred mode
[ 33.680] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 33.680] (II) fglrx(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 33.680] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 33.680] (II) fglrx(0): Manufacturer's mask: 0
[ 33.680] (II) fglrx(0): Supported detailed timing:
[ 33.680] (II) fglrx(0): clock: 70.7 MHz Image Size: 344 x 193 mm
[ 33.680] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1398 h_blank_end 1490 h_border: 0
[ 33.680] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 785 v_blanking: 790 v_border: 0
[ 33.680] (II) fglrx(0): Unknown vendor-specific block f
[ 33.680] (II) fglrx(0): AUO
[ 33.680] (II) fglrx(0): B156XTN02.1
[ 33.680] (II) fglrx(0): EDID (in hex):
[ 33.680] (II) fglrx(0): 00ffffffffffff0006afec2100000000
[ 33.680] (II) fglrx(0): 001501049022137802c8959e57549226
[ 33.680] (II) fglrx(0): 0f505400000001010101010101010101
[ 33.680] (II) fglrx(0): 0101010101019e1b567c500016301010
[ 33.680] (II) fglrx(0): 3e0058c1100000180000000f00000000
[ 33.680] (II) fglrx(0): 00000000000000000020000000fe0041
[ 33.680] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 33.680] (II) fglrx(0): 004231353658544e30322e31200a000d
[ 33.680] (II) fglrx(0): EDID vendor "AUO", prod id 8684
[ 33.680] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.680] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 33.680] (II) fglrx(0): Printing probed modes for output LVDS
[ 33.680] (II) fglrx(0): Modeline "1366x768"x60.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 33.680] (II) fglrx(0): Modeline "1360x768"x60.0 70.70 1360 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "1280x768"x60.0 70.70 1280 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "1280x720"x60.0 70.70 1280 1382 1398 1490 720 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "1024x768"x60.0 70.70 1024 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "1024x600"x60.0 70.70 1024 1382 1398 1490 600 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "800x600"x60.0 70.70 800 1382 1398 1490 600 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "800x480"x60.0 70.70 800 1382 1398 1490 480 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): Modeline "640x480"x60.0 70.70 640 1382 1398 1490 480 771 785 790 -hsync -vsync (47.4 kHz e)
[ 33.680] (II) fglrx(0): EDID for output DFP1
[ 33.680] (II) fglrx(0): EDID for output CRT1
[ 33.680] (II) fglrx(0): Output LVDS connected
[ 33.680] (II) fglrx(0): Output DFP1 disconnected
[ 33.680] (II) fglrx(0): Output CRT1 disconnected
[ 33.680] (II) fglrx(0): Using exact sizes for initial modes
[ 33.680] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 33.680] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 33.680] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 33.680] (II) fglrx(0): DPI set to (102, 102)
[ 33.680] (II) fglrx(0): Eyefinity capable adapter detected.
[ 33.680] (II) fglrx(0): Adapter AMD Radeon HD 7600M Series has 6 configurable heads and 0 displays connected.
[ 33.680] (= fglrx(0): PseudoColor visuals disabled
[ 33.680] (II) Loading sub module "ramdac"
[ 33.680] (II) LoadModule: "ramdac"
[ 33.680] (II) Module "ramdac" already built-in
[ 33.680] (= fglrx(0): NoDRI = NO
[ 33.680] (= fglrx(0): Capabilities: 0x00000000
[ 33.680] (= fglrx(0): CapabilitiesEx: 0x00000000
[ 33.680] (= fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 33.680] (= fglrx(0): UseFastTLS=0
[ 33.680] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 33.680] (--) Depth 24 pixmap format is 32 bpp
[ 33.680] Loading extension ATIFGLRXDRI
[ 33.680] (II) fglrx(0): doing swlDriScreenInit
[ 33.680] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 33.681] ukiDynamicMajor: found major device number 250
[ 33.681] ukiDynamicMajor: found major device number 250
[ 33.681] ukiDynamicMajor: found major device number 250
[ 33.681] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 33.681] ukiOpenDevice: node name is /dev/ati/card0
[ 33.681] ukiOpenDevice: open result is 16, (OK)
[ 33.681] ukiOpenByBusid: ukiOpenMinor returns 16
[ 33.681] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 33.681] ukiOpenDevice: node name is /dev/ati/card1
[ 33.681] ukiOpenDevice: open result is 16, (OK)
[ 33.681] ukiOpenByBusid: ukiOpenMinor returns 16
[ 33.681] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 33.681] (II) fglrx(0): [uki] DRM interface version 1.0
[ 33.681] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 33.681] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 33.681] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f3ebb8ba000
[ 33.681] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 33.681] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 33.681] (II) fglrx(0): swlDriScreenInit done
[ 33.681] (II) fglrx(0): Kernel Module Version Information:
[ 33.681] (II) fglrx(0): Name: fglrx
[ 33.681] (II) fglrx(0): Version: 12.10.5
[ 33.681] (II) fglrx(0): Date: Mar 28 2013
[ 33.681] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 33.681] (II) fglrx(0): Kernel Module version matches driver.
[ 33.681] (II) fglrx(0): Kernel Module Build Time Information:
[ 33.681] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.9.3-030903-generic
[ 33.681] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 33.681] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 33.681] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 33.681] (II) fglrx(0): [uki] register handle = 0x00004000
[ 33.684] (II) fglrx(0): Static shadow buffer initialized.
[ 33.714] (II) fglrx(0): DRI initialization successfull
[ 33.732] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 33.738] (= fglrx(0): Backing store disabled
[ 33.738] Loading extension FGLRXEXTENSION
[ 33.738] (**) fglrx(0): DPMS enabled
[ 33.738] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 33.738] (**) fglrx(0): Textured Video is enabled.
[ 33.738] (II) LoadModule: "glesx"
[ 33.739] (II) Loading /usr/lib/xorg/modules/glesx.so

Пользователь решил продолжить мысль 25 Мая 2013, 12:54:58:Так как в одном сообщении не отправить более 30000 символов, вот продолжение /var/log/Xorg.0.log

(Нажмите, чтобы показать/скрыть)

33.739] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 33.921] (II) Module glesx: vendor="X.Org Foundation"
[ 33.921] compiled for 1.4.99.906, module version = 1.0.0
[ 33.921] Loading extension GLESX
[ 33.921] (II) fglrx(0): GLESX enableFlags = 848
[ 33.921] (II) fglrx(0): GLESX is enabled
[ 33.921] (II) LoadModule: "amdxmm"
[ 33.922] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 33.951] (II) Module amdxmm: vendor="X.Org Foundation"
[ 33.951] compiled for 1.4.99.906, module version = 2.0.0
[ 33.952] Loading extension AMDXVOPL
[ 33.952] Loading extension AMDXVBA
[ 33.965] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 33.966] (II) fglrx(0): Enable composite support successfully
[ 33.966] (WW) fglrx(0): Option "VendorName" is not used
[ 33.966] (WW) fglrx(0): Option "ModelName" is not used
[ 33.966] (II) fglrx(0): X context handle = 0x1
[ 33.966] (II) fglrx(0): [DRI] installation complete
[ 33.969] (= fglrx(0): Silken mouse enabled
[ 33.969] (= fglrx(0): Using HW cursor of display infrastructure!
[ 33.969] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 33.981] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 35.170] (--) RandR disabled
[ 35.175] (II) SELinux: Disabled on system
[ 35.176] ukiDynamicMajor: found major device number 250
[ 35.176] ukiDynamicMajor: found major device number 250
[ 35.176] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 35.176] ukiOpenDevice: node name is /dev/ati/card0
[ 35.177] ukiOpenDevice: open result is 17, (OK)
[ 35.177] ukiOpenByBusid: ukiOpenMinor returns 17
[ 35.177] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 35.177] ukiOpenDevice: node name is /dev/ati/card1
[ 35.177] ukiOpenDevice: open result is 17, (OK)
[ 35.177] ukiOpenByBusid: ukiOpenMinor returns 17
[ 35.177] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 35.632] ukiDynamicMajor: found major device number 250
[ 35.632] ukiDynamicMajor: found major device number 250
[ 35.632] ukiDynamicMajor: found major device number 250
[ 35.632] ukiOpenDevice: node name is /dev/ati/card0
[ 35.632] ukiOpenDevice: open result is 18, (OK)
[ 35.632] ukiGetBusid returned 'PCI:0:1:0'
[ 35.632] ukiOpenDevice: node name is /dev/ati/card1
[ 35.632] ukiOpenDevice: open result is 18, (OK)
[ 35.632] ukiGetBusid returned 'PCI:1:0:0'
[ 35.632] ukiOpenDevice: node name is /dev/ati/card2
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: Open failed
[ 35.632] ukiOpenDevice: node name is /dev/ati/card3
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: Open failed
[ 35.632] ukiOpenDevice: node name is /dev/ati/card4
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: Open failed
[ 35.632] ukiOpenDevice: node name is /dev/ati/card5
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: Open failed
[ 35.632] ukiOpenDevice: node name is /dev/ati/card6
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: Open failed
[ 35.632] ukiOpenDevice: node name is /dev/ati/card7
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.632] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card8
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card9
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card10
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card11
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card12
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card13
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card14
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiOpenDevice: node name is /dev/ati/card15
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: open result is -1, (No such device)
[ 35.633] ukiOpenDevice: Open failed
[ 35.633] ukiDynamicMajor: found major device number 250
[ 35.633] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 35.633] ukiOpenDevice: node name is /dev/ati/card0
[ 35.633] ukiOpenDevice: open result is 18, (OK)
[ 35.633] ukiOpenByBusid: ukiOpenMinor returns 18
[ 35.633] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 36.307] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0

Кто знает в чём причина и как решить проблему, пожалуйста, отзовитесь.

[Axa-Ru]

в настройках экрана оставил параметр выключить при бездействии 10 мин

Можно поподробнее:
1. что конкретно поставил "при бездействии"?
2. Как называется ноут?

[arrecck]

https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/969860
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/968265

[ferty]

Axa-Ru,
1.

2.http://www.samsung.com/ru/consumer/computers-peripherals/notebooks/essential/NP355V5X-S01RU
arrecck,
Большое спасибо за наводку, толко я понятия не имею что мне с этим делать .

[arrecck]

баг интересный, регрессии для видеодрайвера, компиза и acpi, лол
во-первых, можно плюсануть баг и ждать фиксов.
задавать какие-то вопросы лучше всего там же.
как костыльное решение, можно отключить DPMS, пока проблему не решат.

[ferty]

Пофиксили в AMD Catalyst™ 13.6 Beta  http://support.amd.com/us/kbarticles/Pages/AMDCatalyst13-6LINBetaDriver.aspx. Проблемы больше нет, зато есть другие ...

[arrecck]

если бы не было проблем, что это тогда за linux )