Linux vs SB-540

[old06]

Установлена Ubuntu 12.04.3, ядро 3.2.0.53 ( пробовал и 3.2.0.29 ), установлены драйвера. Не хочит лочить спутник, при попытки залочить пишет в логах :
Sep 28 12:41:42 vserver kernel: [ 203.552042] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:44 vserver kernel: [ 205.556037] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:46 vserver kernel: [ 207.560046] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:48 vserver kernel: [ 209.564041] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:50 vserver kernel: [ 211.568042] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:52 vserver kernel: [ 213.572039] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:54 vserver kernel: [ 215.576040] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:56 vserver kernel: [ 217.580039] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:41:58 vserver kernel: [ 219.584045] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Sep 28 12:42:00 vserver kernel: [ 221.588045] cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Определилась dvb карта нормально :
[ 5.316481] 5fb67074c6657edc34867cba78255b6f5b505f12 [media] dvb: add support for Thomson DTT7520X
[ 5.438967] 5fb67074c6657edc34867cba78255b6f5b505f12 [media] dvb: add support for Thomson DTT7520X
[ 7.480359] 5fb67074c6657edc34867cba78255b6f5b505f12 [media] dvb: add support for Thomson DTT7520X
[ 7.493844] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 7.493852] cx88/2: registering cx8802 driver, type: dvb access: shared
Что мне пишет во время подключения:
### Executing: /usr/local/sbin/szap-s2 -c /etc/dvb/channels.conf -x STARBLAZER-AM33

reading channels from file '/etc/dvb/channels.conf'
zapping to 2 'STARBLAZER-AM33':
delivery DVB-S2, modulation QPSK
sat 0, frequency 11033 MHz H, symbolrate 5160000, coderate auto, rolloff 0.35
vpid 0x1fff, apid 0x1fff, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr 0000 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr ccb0 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr ccb0 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr ccb0 | ber ffffffff | unc 00000000 |
status 00 | signal a218 | snr ccb0 | ber ffffffff | unc 00000000 |

DVB Network Interface Manager
Copyright © 2003, TV Files S.p.A

Status: device dvb0_0 for pid 1535 created successfully.
2013-09-28 18:19:46 DVB channel is not locked, NLOCK=0

reading channels from file '/etc/dvb/channels.conf'
zapping to 2 'STARBLAZER-AM33':
delivery DVB-S2, modulation QPSK
sat 0, frequency 11033 MHz H, symbolrate 5160000, coderate auto, rolloff 0.35
vpid 0x1fff, apid 0x1fff, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |
status 00 | signal 63% | snr 79% | ber -1 | unc 0 |

lspi:

02:01.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Device 0540:9022
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800

02:01.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Device 0540:9022
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802

Помогите кто сталкивался, с DVB картами на *Unix впервые сталкиваюсь. Заранее спасибо за ответ.

[andwer07]

я стандарт/поляризация/частота - всё правильно выставлено?
карта поддерживает DVB-S2?
точно помню, что видел такую ошибку, но не помню, когда.

[old06]

Все настроено правильно по мануалу провайдера. Карта поддерживает DVB-S2. Встречал тоже у многих такую проблему, но все сводилось к тому что никто ни смог так ее победить (

[andwer07]

мне кажется, вы каким-то скриптом пытаетесь всё это дело запустить? покажите скрипт и channels.conf

[old06]

мне кажется, вы каким-то скриптом пытаетесь всё это дело запустить? покажите скрипт и channels.conf

cat /etc/dvb/channels.conf
STARBLAZER-IS904:11526:VS1M5C56:0:5300:0:0:0
STARBLAZER-AM33:11033:HS1:0:5160:0:0:0

Скрипт с которого пытаюсь залочить dvbnetstart

(Нажмите, чтобы показать/скрыть)

#!/bin/bash
#
# dvbnetstart.sh
#
# start dvb network interfaces
#
# (C) 2010-2012 George Ivanov (gi)
# 2012/08/24
#

LOGDIR=/var/log/dvb
DVBNET=/usr/local/sbin/dvbnet
SZAP=/usr/local/sbin/szap-s2
CHKFELOCK=/usr/local/bin/dvbchkfelock
DVBNETCFG=/etc/dvb/dvbnet.conf
CHANLFILE=/etc/dvb/channels.conf

DVBPID0=""
DVBMACADR0=""
DVBIPADR0=""
DVBNMASK0="255.255.255.0"
DSTNET0=""
DSTNMASK0="255.255.255.255"
DSTGW0=""

DVBPID1=""
DVBMACADR1=""
DVBIPADR1=""
DVBNMASK1="255.255.255.0"
DSTNET1=""
DSTNMASK1="255.255.255.255"
DSTGW1=""

LNBPARM=""
TRANSPNAME=""
TRANSPNUMB=""
TRANSPARM=""

DVBDEVICE=/dev/dvb/adapter0/frontend0
DVBIFACE0="dvb0_0"
DVBIFACE1="dvb0_1"

# DVB network configuration file
#
[ -f $DVBNETCFG ] && . $DVBNETCFG

if [ ! -d $LOGDIR ]; then
  mkdir $LOGDIR
fi

if [ ! -z "$TRANSPNAME" ]; then
  TRANSPARM=$TRANSPNAME
else
  if [ ! -z "$TRANSPNUMB" ]; then
    TRANSPARM="-n $TRANSPNUMB"
  fi
fi

if [ -z "$TRANSPARM" ]; then
  echo "$(date '+%Y-%m-%d %H:%M:%S')  start dvb-s2: transponder not specified - exit"
  exit 0
fi

if [ ! -z "$LNBPARM" ]; then
  SZAPARM="-c $CHANLFILE -l $LNBPARM -x $TRANSPARM"
else
  SZAPARM="-c $CHANLFILE -x $TRANSPARM"
fi

echo -e "\n$(date '+%Y-%m-%d %H:%M:%S')  start dvb-s2"

maxwait=${maxwait:-30}

# Wait for dvb driver loading
#
while [ ! -e "$DVBDEVICE" -a $maxwait -gt 0 ]; do
  maxwait=$(($maxwait - 1))
  sleep 1
done

echo -e "$(date '+%Y-%m-%d %H:%M:%S')  rest of wait=$maxwait, dvb-s2 device=$DVBDEVICE\n"

# Tune receiver to lock a channel
#
echo -e "### Executing: $SZAP $SZAPARM\n"
$SZAP $SZAPARM

# Delay for proper locking a channel
#
sleep 3

# Create DVB Network Interfaces
#
# Usage: dvbnet [options]
# Where options are:
#         -a AD  : Adapter card (default 0)
#         -n DD  : Demux (default 0)
#         -p PID : Add interface listening on PID
#         -d NUM : Remove interface NUM
#         -l     : List currently available interfaces
#         -U     : use ULE framing (default: MPE)
#         -v     : Print current version
#

# Create DVB interface for uplink (dvb0_0)
#
if [ ! -z "$DVBPID0" ]; then
  $DVBNET -a 0 -n 0 -p $DVBPID0
fi

# Create DVB interface for uplink (dvb0_1)
#
if [ ! -z "$DVBPID1" ]; then
  $DVBNET -a 0 -n 0 -p $DVBPID1
fi

# Configure DVB interface for uplink (dvb0_0)
#
if [ ! -z "$DVBPID0" ]; then
  if [ ! -z "$DVBMACADR0" ]; then
    if [ ! -z "$DVBIPADR0" ]; then
      ifconfig $DVBIFACE0 hw ether $DVBMACADR0 $DVBIPADR0 netmask $DVBNMASK0
    else
      # Configure DVB interface for pcap-uplink
      #
      ifconfig $DVBIFACE0 hw ether $DVBMACADR0
      ifconfig $DVBIFACE0 up
    fi
  else
    if [ ! -z "$DVBIPADR0" ]; then
      ifconfig $DVBIFACE0 $DVBIPADR0 netmask $DVBNMASK0
    else
      # Configure DVB interface for pcap-uplink
      #
      ifconfig $DVBIFACE0 up
    fi
  fi
fi

# Configure DVB interface for uplink (dvb0_1)
#
if [ ! -z "$DVBPID1" ]; then
  if [ ! -z "$DVBMACADR1" ]; then
    if [ ! -z "$DVBIPADR1" ]; then
      ifconfig $DVBIFACE1 hw ether $DVBMACADR1 $DVBIPADR1 netmask $DVBNMASK1
    else
      # Configure DVB interface for pcap-uplink
      #
      ifconfig $DVBIFACE1 hw ether $DVBMACADR1
      ifconfig $DVBIFACE1 up
    fi
  else
    if [ ! -z "$DVBIPADR1" ]; then
      ifconfig $DVBIFACE1 $DVBIPADR1 netmask $DVBNMASK1
    else
      # Configure DVB interface for pcap-uplink
      #
      ifconfig $DVBIFACE1 up
    fi
  fi
fi

# Delay for proper starting dvb interfaces
#
sleep 3

# Check receiver to keep locking channel
#
$CHKFELOCK

# Set system parameters (for network protocols)
#
#sysctl -w net.ipv4.ip_forward=1
#sysctl -w net.ipv4.conf.all.rp_filter=0
# sysctl -w net.ipv4.conf."$DVBIFACE0".rp_filter=0
# sysctl -w net.ipv4.conf."$DVBIFACE1".rp_filter=0
#sysctl -w net.ipv4.conf.all.forwarding=0
# sysctl -w net.ipv4.conf."$DVBIFACE0".forwarding=0
# sysctl -w net.ipv4.conf."$DVBIFACE1".forwarding=0

# Set static routes for outside destinations
#
[ ! -z $DSTNET0 ] && [ ! -z $DSTGW0 ] && {
  route del -net $DSTNET0 netmask $DSTNMASK0
  route add -net $DSTNET0 netmask $DSTNMASK0 gw $DSTGW0
}
[ ! -z $DSTNET1 ] && [ ! -z $DSTGW1 ] && {
  route del -net $DSTNET1 netmask $DSTNMASK1
  route add -net $DSTNET1 netmask $DSTNMASK1 gw $DSTGW1
}

[andwer07]

а что значит параметр VS1M5C56 в channels.conf? Я там просто прописываю v или h в зависимости от поляризации...

[old06]

а что значит параметр VS1M5C56 в channels.conf? Я там просто прописываю v или h в зависимости от поляризации...

Я не использую STARBLAZER-IS904 я пользуюсь спутником AM-33. M5 точно помню это 8PSK, а остальное не помню )