Доброго времени суток.
Проблема в следующем - не монтирует ни один USB накопитель. Мышка при этом стабильно работает. Использую ноутбук MSI cx705mx, OS Ubuntu 14.04.
lsusb уже при подключенном девайсе
evol@evol-CX705-MX:~$ lsusb
Bus 001 Device 006: ID 13d3:5092 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
[ 1.033329] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
[ 1.033331] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
[ 1.033806] libphy: Fixed MDIO Bus: probed
[ 1.033910] tun: Universal TUN/TAP device driver, 1.6
[ 1.033911] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.033974] PPP generic driver version 2.4.2
[ 1.034031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.034037] ehci-pci: EHCI PCI platform driver
[ 1.034162] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.034171] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.034226] ehci-pci 0000:00:03.3: irq 22, io mem 0xfddfd000
[ 1.044035] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.044121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.044126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044130] usb usb1: Product: EHCI Host Controller
[ 1.044134] usb usb1: Manufacturer: Linux 3.13.0-40-generic ehci_hcd
[ 1.044138] usb usb1: SerialNumber: 0000:00:03.3
[ 1.044297] hub 1-0:1.0: USB hub found
[ 1.044306] hub 1-0:1.0: 8 ports detected
[ 1.044566] ehci-platform: EHCI generic platform driver
[ 1.044576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.044578] ohci-pci: OHCI PCI platform driver
[ 1.044659] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.044671] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.044692] ohci-pci 0000:00:03.0: irq 20, io mem 0xfddff000
[ 1.102091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.102094] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.102096] usb usb2: Product: OHCI PCI host controller
[ 1.102099] usb usb2: Manufacturer: Linux 3.13.0-40-generic ohci_hcd
[ 1.102101] usb usb2: SerialNumber: 0000:00:03.0
[ 1.102212] hub 2-0:1.0: USB hub found
[ 1.102221] hub 2-0:1.0: 4 ports detected
[ 1.102396] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.102403] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.102423] ohci-pci 0000:00:03.1: irq 21, io mem 0xfddfe000
[ 1.158112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.158115] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.158118] usb usb3: Product: OHCI PCI host controller
[ 1.158120] usb usb3: Manufacturer: Linux 3.13.0-40-generic ohci_hcd
[ 1.158122] usb usb3: SerialNumber: 0000:00:03.1
[ 1.158252] hub 3-0:1.0: USB hub found
[ 1.158261] hub 3-0:1.0: 4 ports detected
[ 1.158398] ohci-platform: OHCI generic platform driver
[ 1.158408] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.158486] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.173848] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.173855] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.174041] mousedev: PS/2 mouse device common for all mice
[ 1.175118] rtc_cmos 00:05: RTC can wake from S4
[ 1.175256] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.175278] rtc_cmos 00:05: alarms up to one year, 114 bytes nvram, hpet irqs
[ 1.175364] device-mapper: uevent: version 1.0.3
[ 1.175452] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.175464] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.175596] TCP: cubic registered
[ 1.175716] NET: Registered protocol family 10
[ 1.175962] NET: Registered protocol family 17
[ 1.175980] Key type dns_resolver registered
[ 1.177906] Loading compiled-in X.509 certificates
[ 1.179122] Loaded X.509 cert 'Magrathea: Glacier signing key: 35728cdb88aa70fdd3acd153a37b513192a47fd8'
[ 1.179145] registered taskstats version 1
[ 1.181861] Key type trusted registered
[ 1.183890] Key type encrypted registered
[ 1.185937] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.185941] IMA: No TPM chip found, activating TPM-bypass!
[ 1.186221] regulator-dummy: disabling
[ 1.186281] Magic number: 6:622:953
[ 1.186441] memory memory6: hash matches
[ 1.186480] rtc_cmos 00:05: setting system clock to 2014-11-21 20:55:05 UTC (1416603305)
[ 1.188294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.328123] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.328125] EDD information not available.
[ 1.328166] PM: Hibernation image not present or could not be loaded.
[ 1.356101] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.624068] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.624075] ACPI: Battery Slot [BAT1] (battery present)
[ 1.624163] ata2: port disabled--ignoring
[ 1.625972] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.625975] Write protecting the kernel read-only data: 12288k
[ 1.628884] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[ 1.631457] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[ 1.646389] systemd-udevd[107]: starting version 204
[ 1.727322] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[ 1.727486] sis190: 0000:00:04.0: Read MAC address from EEPROM
[ 1.727489] sis190: 0000:00:04.0: Error EEPROM read 0
[ 1.727492] sis190: 0000:00:04.0: Read MAC address from APC
[ 1.772034] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
[ 2.284026] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[ 2.316299] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc9000062cc00 (IRQ: 19), 40:61:86:1e:cf:c5
[ 2.316302] sis190 0000:00:04.0 eth0: RGMII mode.
[ 2.316309] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[ 2.348073] sata_sis 0000:00:05.0: version 1.0
[ 2.348269] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 2.349091] scsi2 : sata_sis
[ 2.349307] scsi3 : sata_sis
[ 2.349355] ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17
[ 2.349357] ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17
[ 2.512257] ata3.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100
[ 2.528256] ata3.00: configured for UDMA/100
[ 2.531753] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N AS02 PQ: 0 ANSI: 5
[ 2.535680] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0, board id: 3655, fw id: 496485
[ 2.535940] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.535943] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.536083] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.536221] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.586432] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.752427] ata4.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 2.752433] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.768614] ata4.00: configured for UDMA/133
[ 2.768806] scsi 3:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 2.768977] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.768987] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.769057] sd 3:0:0:0: [sda] Write Protect is off
[ 2.769061] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.769104] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.798698] sda: sda1 sda2 < sda5 >
[ 2.799139] sd 3:0:0:0: [sda] Attached SCSI disk
[ 3.206239] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.468097] usb 1-1: device descriptor read/64, error -110
[ 31.684092] usb 1-1: device descriptor read/64, error -110
[ 31.900095] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 33.704186] random: nonblocking pool is initialized
[ 47.012059] usb 1-1: device descriptor read/64, error -110
[ 47.667563] Adding 3143676k swap on /dev/sda5. Priority:-1 extents:1 across:3143676k FS
[ 47.764574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.868128] systemd-udevd[273]: starting version 204
[ 48.133910] lp: driver loaded but no devices found
[ 48.143707] ppdev: user-space parallel port driver
[ 48.600609] wmi: Mapper loaded
[ 48.603177] ACPI: Video Device [AVGA] (multi-head: yes rom: no post: no)
[ 48.680445] cfg80211: Calling CRDA to update world regulatory domain
[ 48.725167] [drm] Initialized drm 1.1.0 20060810
[ 48.773033] acpi device:13: registered as cooling_device2
[ 48.773119] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:10/LNXVIDEO:00/input/input7
[ 48.870251] ath: phy0: Enable LNA combining
[ 48.874866] type=1400 audit(1416603353.183:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=336 comm="apparmor_parser"
[ 48.874875] type=1400 audit(1416603353.183:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=336 comm="apparmor_parser"
[ 48.874881] type=1400 audit(1416603353.183:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
[ 48.875366] type=1400 audit(1416603353.183:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=336 comm="apparmor_parser"
[ 48.875373] type=1400 audit(1416603353.183:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
[ 48.875632] type=1400 audit(1416603353.183:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
[ 48.879794] type=1400 audit(1416603353.187:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=344 comm="apparmor_parser"
[ 48.879809] type=1400 audit(1416603353.187:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=344 comm="apparmor_parser"
[ 48.879816] type=1400 audit(1416603353.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=344 comm="apparmor_parser"
[ 48.891120] type=1400 audit(1416603353.199:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=344 comm="apparmor_parser"
[ 48.927368] ath: EEPROM regdomain: 0x8283
[ 48.927373] ath: EEPROM indicates we should expect a country code
[ 48.927377] ath: doing EEPROM country->regdmn map search
[ 48.927378] ath: country maps to regdmn code: 0x3
[ 48.927380] ath: Country alpha2 being used: RU
[ 48.927381] ath: Regpair used: 0x3
[ 48.935721] [drm] radeon kernel modesetting enabled.
[ 48.935831] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[ 48.935833] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 48.935920] Console: switching to colour dummy device 80x25
[ 48.937595] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1462:0x105C).
[ 48.937629] [drm] register mmio base: 0xFDEF0000
[ 48.937631] [drm] register mmio size: 65536
[ 48.937825] ATOM BIOS: BR36505
[ 48.937873] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 48.937875] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 48.937878] [drm] Detected VRAM RAM=512M, BAR=256M
[ 48.937879] [drm] RAM width 64bits DDR
[ 48.945457] [TTM] Zone kernel: Available graphics memory: 1540844 kiB
[ 48.945461] [TTM] Initializing pool allocator
[ 48.945467] [TTM] Initializing DMA pool allocator
[ 48.945504] [drm] radeon: 512M of VRAM memory ready
[ 48.945507] [drm] radeon: 1024M of GTT memory ready.
[ 48.945531] [drm] Loading RV710 Microcode
[ 48.965753] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 48.966511] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010760000, irq=16
[ 49.009905] input: MSI WMI hotkeys as /devices/virtual/input/input8
[ 49.159848] hda_codec: ALC888: SKU not ready 0x411111f0
[ 49.160260] autoconfig: line_outs=2 (0x16/0x1b/0x0/0x0/0x0) type:speaker
[ 49.160263] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 49.160264] hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 49.160266] mono: mono_out=0x0
[ 49.160267] dig-out=0x1e/0x0
[ 49.160268] inputs:
[ 49.160270] Internal Mic=0x19
[ 49.160272] Mic=0x18
[ 49.160274] Line=0x1a
[ 49.160275] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 49.160277] realtek: Enable default setup for auto mode as fallback
[ 49.182137] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input11
[ 49.182339] input: HDA SIS966 Line as /devices/pci0000:00/0000:00:0f.0/sound/card0/input10
[ 49.182748] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input9
[ 49.376945] cfg80211: World regulatory domain updated:
[ 49.376951] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 49.376954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 49.376956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 49.376958] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 49.376960] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 49.376961] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 49.376978] cfg80211: Calling CRDA for country: RU
[ 49.381143] cfg80211: Regulatory domain changed to country: RU
[ 49.381149] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 49.381151] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 49.381153] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 49.785798] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 49.793811] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 49.793891] radeon 0000:01:00.0: WB enabled
[ 49.793897] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ae2bac00
[ 49.793900] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ae2bac0c
[ 49.794773] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001091c598
[ 49.794778] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 49.794779] [drm] Driver supports precise vblank timestamp query.
[ 49.794825] radeon 0000:01:00.0: irq 40 for MSI/MSI-X
[ 49.794851] radeon 0000:01:00.0: radeon: using MSI.
[ 49.794892] [drm] radeon: irq initialized.
[ 49.840967] [drm] ring test on 0 succeeded in 1 usecs
[ 49.840981] [drm] ring test on 3 succeeded in 1 usecs
[ 50.025623] [drm] ring test on 5 succeeded in 1 usecs
[ 50.025631] [drm] UVD initialized successfully.
[ 50.025799] [drm] Enabling audio 0 support
[ 50.025829] [drm] ib test on ring 0 succeeded in 0 usecs
[ 50.025850] [drm] ib test on ring 3 succeeded in 0 usecs
[ 50.175199] [drm] ib test on ring 5 succeeded
[ 50.176089] [drm] Radeon Display Connectors
[ 50.176091] [drm] Connector 0:
[ 50.176093] [drm] LVDS-1
[ 50.176095] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 50.176096] [drm] Encoders:
[ 50.176098] [drm] LCD1: INTERNAL_UNIPHY2
[ 50.176099] [drm] Connector 1:
[ 50.176101] [drm] VGA-1
[ 50.176102] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[ 50.176104] [drm] Encoders:
[ 50.176105] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 50.176106] [drm] Connector 2:
[ 50.176108] [drm] HDMI-A-1
[ 50.176109] [drm] HPD2
[ 50.176111] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 50.176112] [drm] Encoders:
[ 50.176113] [drm] DFP1: INTERNAL_UNIPHY
[ 50.200572] [drm] radeon: dpm initialized
[ 50.443955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 50.672356] [drm] fb mappable at 0xD045E000
[ 50.672360] [drm] vram apper at 0xD0000000
[ 50.672362] [drm] size 5787648
[ 50.672363] [drm] fb depth is 24
[ 50.672365] [drm] pitch is 6400
[ 50.672608] fbcon: radeondrmfb (fb0) is primary device
[ 50.840145] Console: switching to colour frame buffer device 200x56
[ 50.844123] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 50.844125] radeon 0000:01:00.0: registered panic notifier
[ 50.857732] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 50.857976] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 50.857979] hda-intel 0000:01:00.1: Using LPIB position fix
[ 50.858045] snd_hda_intel 0000:01:00.1: irq 41 for MSI/MSI-X
[ 50.876360] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 50.905899] HDMI ATI/AMD: no speaker allocation for ELD
[ 50.906000] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 50.946803] init: failsafe main process (556) killed by TERM signal
[ 51.733198] Bluetooth: Core ver 2.17
[ 51.733258] NET: Registered protocol family 31
[ 51.733260] Bluetooth: HCI device and connection manager initialized
[ 51.733286] Bluetooth: HCI socket layer initialized
[ 51.733289] Bluetooth: L2CAP socket layer initialized
[ 51.733296] Bluetooth: SCO socket layer initialized
[ 51.739515] Bluetooth: RFCOMM TTY layer initialized
[ 51.739537] Bluetooth: RFCOMM socket layer initialized
[ 51.739544] Bluetooth: RFCOMM ver 1.11
[ 51.931892] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 51.931898] Bluetooth: BNEP filters: protocol multicast
[ 51.931919] Bluetooth: BNEP socket layer initialized
[ 51.960749] init: cups main process (642) killed by HUP signal
[ 51.960765] init: cups main process ended, respawning
[ 53.094140] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.094423] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.109963] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.110311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 54.026645] wlan0: authenticate with c4:a8:1d:49:af:12
[ 54.051287] wlan0: send auth to c4:a8:1d:49:af:12 (try 1/3)
[ 54.053858] wlan0: authenticated
[ 54.060046] wlan0: associate with c4:a8:1d:49:af:12 (try 1/3)
[ 54.064163] wlan0: RX AssocResp from c4:a8:1d:49:af:12 (capab=0x411 status=0 aid=3)
[ 54.064241] wlan0: associated
[ 54.064292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 54.501816] audit_printk_skb: 165 callbacks suppressed
[ 54.501821] type=1400 audit(1416603358.811:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=968 comm="apparmor_parser"
[ 54.535849] init: gdm main process (877) killed by TERM signal
[ 58.586448] init: plymouth-upstart-bridge main process ended, respawning
[ 58.599802] init: plymouth-upstart-bridge main process (1237) terminated with status 1
[ 58.599831] init: plymouth-upstart-bridge main process ended, respawning
[ 62.228101] usb 1-1: device descriptor read/64, error -110
[ 62.444108] usb 1-1: new high-speed USB device number 4 using ehci-pci
[ 63.124055] sis190 0000:00:04.0 eth0: auto-negotiating...
[ 72.852087] usb 1-1: device not accepting address 4, error -110
[ 72.964116] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 81.555121] type=1400 audit(1416603385.863:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1596 comm="apparmor_parser"
[ 81.555140] type=1400 audit(1416603385.863:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1596 comm="apparmor_parser"
[ 81.556044] type=1400 audit(1416603385.867:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1596 comm="apparmor_parser"
[ 83.372092] usb 1-1: device not accepting address 5, error -110
[ 83.372151] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 83.508114] usb 1-4: new high-speed USB device number 6 using ehci-pci
[ 83.713576] usb 1-4: New USB device found, idVendor=13d3, idProduct=5092
[ 83.713583] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 83.713588] usb 1-4: Product: USB2.0 UVC PC Camera
[ 83.713592] usb 1-4: Manufacturer: GenesysLogic Technology Co., Ltd.
[ 83.889663] Linux video capture interface: v2.00
[ 83.904695] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (13d3:5092)
[ 83.915203] input: USB2.0 UVC PC Camera as /devices/pci0000:00/0000:00:03.3/usb1/1-4/1-4:1.0/input/input13
[ 83.915379] usbcore: registered new interface driver uvcvideo
[ 83.915383] USB Video Class driver (1.1.1)
[ 84.028065] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 99.208125] usb 2-1: device descriptor read/64, error -110
[ 114.492063] usb 2-1: device descriptor read/64, error -110
[ 114.772091] usb 2-1: new full-speed USB device number 3 using ohci-pci
[ 129.948086] usb 2-1: device descriptor read/64, error -110
[ 145.228102] usb 2-1: device descriptor read/64, error -110
[ 145.508169] usb 2-1: new full-speed USB device number 4 using ohci-pci
[ 155.916288] usb 2-1: device not accepting address 4, error -110
[ 156.092067] usb 2-1: new full-speed USB device number 5 using ohci-pci
[ 166.500064] usb 2-1: device not accepting address 5, error -110
[ 166.500118] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 234.660316] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 273.528055] TCP: TCP: Possible SYN flooding on port 6881. Sending cookies. Check SNMP counters.
[ 424.096101] usb 1-1: new high-speed USB device number 7 using ehci-pci
[ 424.230788] usb 1-1: New USB device found, idVendor=1687, idProduct=6211
[ 424.230797] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 424.230801] usb 1-1: Product: USB2.0 FlashDisk
[ 424.230805] usb 1-1: Manufacturer: Kingmax
[ 424.230809] usb 1-1: SerialNumber: 201211240000000000000001
[ 424.262924] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 424.263036] scsi4 : usb-storage 1-1:1.0
[ 424.263791] usbcore: registered new interface driver usb-storage
[ 425.261105] scsi 4:0:0:0: CD-ROM Kingmax USB2.0 FlashDisk 1.00 PQ: 0 ANSI: 2
[ 425.261594] scsi 4:0:0:1: Direct-Access Kingmax USB2.0 FlashDisk 1.00 PQ: 0 ANSI: 2
[ 425.267470] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 425.267812] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 425.270302] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 425.270673] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 425.272555] sd 4:0:0:1: [sdb] 31199232 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 425.274809] sd 4:0:0:1: [sdb] Write Protect is off
[ 425.274821] sd 4:0:0:1: [sdb] Mode Sense: 23 00 00 00
[ 425.276297] sd 4:0:0:1: [sdb] No Caching mode page found
[ 425.276302] sd 4:0:0:1: [sdb] Assuming drive cache: write through
[ 425.281972] sd 4:0:0:1: [sdb] No Caching mode page found
[ 425.281980] sd 4:0:0:1: [sdb] Assuming drive cache: write through
[ 426.507388] sdb: unknown partition table
[ 426.512997] sd 4:0:0:1: [sdb] No Caching mode page found
[ 426.513006] sd 4:0:0:1: [sdb] Assuming drive cache: write through
[ 426.513013] sd 4:0:0:1: [sdb] Attached SCSI removable disk
[ 426.672067] usb 1-1: reset high-speed USB device number 7 using ehci-pci
[ 441.784119] usb 1-1: device descriptor read/64, error -110
[ 457.000085] usb 1-1: device descriptor read/64, error -110
[ 457.216094] usb 1-1: reset high-speed USB device number 7 using ehci-pci
[ 472.328253] usb 1-1: device descriptor read/64, error -110
[ 487.544079] usb 1-1: device descriptor read/64, error -110
[ 487.760116] usb 1-1: reset high-speed USB device number 7 using ehci-pci
[ 498.168067] usb 1-1: device not accepting address 7, error -110
[ 498.280082] usb 1-1: reset high-speed USB device number 7 using ehci-pci
[ 508.688059] usb 1-1: device not accepting address 7, error -110
[ 508.688183] usb 1-1: USB disconnect, device number 7
[ 508.688670] sr 4:0:0:0: Device offlined - not ready after error recovery
[ 508.688812] sd 4:0:0:1: [sdb] Unhandled error code
[ 508.688815] sd 4:0:0:1: [sdb]
[ 508.688817] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 508.688820] sd 4:0:0:1: [sdb] CDB:
[ 508.688822] Read(10): 28 20 01 dc 0f f9 00 00 01 00
[ 508.688831] end_request: I/O error, dev sdb, sector 31199225
[ 508.688837] Buffer I/O error on device sdb, logical block 3899903
[ 508.808102] usb 1-1: new high-speed USB device number 8 using ehci-pci
[ 523.920153] usb 1-1: device descriptor read/64, error -110
[ 539.140081] usb 1-1: device descriptor read/64, error -110
[ 539.356113] usb 1-1: new high-speed USB device number 9 using ehci-pci
[ 554.468064] usb 1-1: device descriptor read/64, error -110
[ 569.684151] usb 1-1: device descriptor read/64, error -110
[ 569.904089] usb 1-1: new high-speed USB device number 10 using ehci-pci
[ 580.312055] usb 1-1: device not accepting address 10, error -110
[ 580.424074] usb 1-1: new high-speed USB device number 11 using ehci-pci
[ 590.832050] usb 1-1: device not accepting address 11, error -110
[ 590.832105] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 591.200149] usb 2-1: new full-speed USB device number 6 using ohci-pci
[ 606.376132] usb 2-1: device descriptor read/64, error -110
[ 606.875995] perf samples too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 621.656145] usb 2-1: device descriptor read/64, error -110
[ 621.940453] usb 2-1: new full-speed USB device number 7 using ohci-pci
[ 637.116251] usb 2-1: device descriptor read/64, error -110
[ 652.396092] usb 2-1: device descriptor read/64, error -110
[ 652.676128] usb 2-1: new full-speed USB device number 8 using ohci-pci
[ 663.084112] usb 2-1: device not accepting address 8, error -110
[ 663.260068] usb 2-1: new full-speed USB device number 9 using ohci-pci
[ 673.668064] usb 2-1: device not accepting address 9, error -110
[ 673.668127] hub 2-0:1.0: unable to enumerate USB device on port 1
Кто знает, как можно решить проблему? Сразу говорю, я сам не могу, т.к. использую ubuntu активно только две недели. Если кто знает решение, помогите, пожалуйста. P.S. В самих компах не нуб, просто Wind'a стала дико лагать и решил уйти на Unix.
Тема: Проблема с USB накопителями (Прочитано 3808 раз)
