Форум русскоязычного сообщества Ubuntu


Хотите сделать посильный вклад в развитие Ubuntu и русскоязычного сообщества?
Помогите нам с документацией!

Автор Тема: Ubuntu 8.04 и ASUS A2800S + RICOH кардридер  (Прочитано 1287 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн kobaltd

  • Автор темы
  • Активист
  • *
  • Сообщений: 264
    • Просмотр профиля
Ubuntu 8.04 и ASUS A2800S + RICOH кардридер
« : 30 Апрель 2008, 00:49:30 »
Собственно есть такой вот ноут
8.04 поставился - все словил (с wi fi немного пошаманил, но заработал)
все бы ничего но есть в ноуте кардридер Ricoh 
CardBus bridge: Ricoh Co Ltd RL5c475 (rev b8)
он тоже вроде "завелся", вот только как то странно, вставляешь в него карточку (mmc пробовал с двумя разными), он их видит и монтирует позволяет на них и писать и читать, только вот все операции записи и чтения происходят с БОЛЬШИМИ тормозами и рывками. Т.е. тормоза : проц не загружаться (по крайней мере по монитору видно), но все начинает дико тормозить - к примеру терминал открываться секунд 20-25, даже мыша (USB) начинает ходить тормозно и рывками, если объемы не большие то не успевает проявляться окно процесса копирования.
Рывками : замечено при прослушивании MP3 с карточки - mp3-шник подзаикиваеться при прослушивании, если перемотать в перед или назад то долго соображает.
Вот такая петрушка - вроде как работает, но в тоже время не реально пользоваться. Помогите советом, гугл и тому подобное юзаю, но пока ничего не нарыл. в логах и dmesg девственно чисто.
Если нужна какая то инфа, напишите, выложу (так как ни одного сообщения об ошибке нет, даже не знаю что показывать и куда копать - совсем грустно)

Оффлайн maniak

  • Активист
  • *
  • Сообщений: 489
    • Просмотр профиля
Re: Ubuntu 8.04 и ASUS A2800S + RICOH кардридер
« Ответ #1 : 30 Апрель 2008, 02:13:32 »
Давайте сюда вывод dmesg в момент тормозов.

Оффлайн kobaltd

  • Автор темы
  • Активист
  • *
  • Сообщений: 264
    • Просмотр профиля
Re: Ubuntu 8.04 и ASUS A2800S + RICOH кардридер
« Ответ #2 : 30 Апрель 2008, 09:07:08 »
Хорошо, дойду до дому скину, но зарание скажу что там ничего нет :(, только сообщение о том что увидел карточку и так далее, ни ероров ни ворнингов никаких ни в dmesg ни в логах нет - в этот то и вся подстава.

Оффлайн kobaltd

  • Автор темы
  • Активист
  • *
  • Сообщений: 264
    • Просмотр профиля
Re: Ubuntu 8.04 и ASUS A2800S + RICOH кардридер
« Ответ #3 : 30 Апрель 2008, 21:00:41 »
ну вот дома
на всякий случай весь dmesg
[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[    0.000000]  BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 131067) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131067
[    0.000000]   HighMem    131067 ->   131067
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131067
[    0.000000] On node 0 totalpages: 131067
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125980 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F5D30 checksum 0
[    0.000000] ACPI: RSDP 000F5D30, 0014 (r0 ASUS  )
[    0.000000] ACPI: RSDT 1FFFB000, 0030 (r1 ASUS   A2C/S    42302E31 MSFT 31313031)
[    0.000000] ACPI: FACP 1FFFB0C4, 0074 (r1 ASUS   A2C/S    42302E31 MSFT 31313031)
[    0.000000] ACPI: DSDT 1FFFB138, 38F6 (r2   ASUS A2C/S        1000 INTL 20030522)
[    0.000000] ACPI: FACS 1FFFF000, 0040
[    0.000000] ACPI: BOOT 1FFFB034, 0028 (r1 ASUS   A2C/S    42302E31 MSFT 31313031)
[    0.000000] ACPI: APIC 1FFFB05C, 005A (r1 ASUS   A2C/S    42302E31 MSFT 31313031)
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130044
[    0.000000] Kernel command line: root=UUID=30e4cabc-9be7-4d07-b64c-e92c9fced937 ro quiet splash noapic
[    0.000000] Found and enabled local APIC!
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 3066.961 MHz processor.
[    7.195618] Console: colour VGA+ 80x25
[    7.195622] console [tty0] enabled
[    7.196023] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    7.196365] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    7.205928] Memory: 507428k/524268k available (2157k kernel code, 16300k reserved, 998k data, 364k init, 0k highmem)
[    7.205935] virtual kernel memory layout:
[    7.205936]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[    7.205937]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    7.205938]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[    7.205939]     lowmem  : 0xc0000000 - 0xdfffb000   ( 511 MB)
[    7.205940]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[    7.205941]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[    7.205942]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[    7.205945] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    7.205984] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    7.285793] Calibrating delay using timer specific routine.. 6138.02 BogoMIPS (lpj=12276042)
[    7.285819] Security Framework initialized
[    7.285827] SELinux:  Disabled at boot.
[    7.285841] AppArmor: AppArmor initialized
[    7.285845] Failure registering capabilities with primary security module.
[    7.285854] Mount-cache hash table entries: 512
[    7.285990] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[    7.286002] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    7.286005] CPU: L2 cache: 512K
[    7.286007] CPU: Hyper-Threading is disabled
[    7.286010] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[    7.286021] Compat vDSO mapped to ffffe000.
[    7.286034] Checking 'hlt' instruction... OK.
[    7.302126] SMP alternatives: switching to UP code
[    7.303634] Freeing SMP alternatives: 11k freed
[    7.303774] Early unpacking initramfs... done
[    7.594465] ACPI: Core revision 20070126
[    7.594521] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    7.595976] ACPI: setting ELCR to 0200 (from 0810)
[    7.596598] CPU0: Intel Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz stepping 09
[    7.596638] Total of 1 processors activated (6138.02 BogoMIPS).
[    7.700754] Brought up 1 CPUs
[    7.700774] CPU0 attaching sched-domain:
[    7.700778]  domain 0: span 01
[    7.700779]   groups: 01
[    7.700984] net_namespace: 64 bytes
[    7.700993] Booting paravirtualized kernel on bare hardware
[    7.701539] Time: 16:28:49  Date: 04/30/08
[    7.701568] NET: Registered protocol family 16
[    7.701792] EISA bus registered
[    7.701819] ACPI: bus type pci registered
[    7.742270] PCI: PCI BIOS revision 2.10 entry at 0xf1330, last bus=1
[    7.742273] PCI: Using configuration type 1
[    7.742274] Setting up standard PCI resources
[    7.748791] ACPI: EC: Look up EC in DSDT
[    7.751471] ACPI: Interpreter enabled
[    7.751475] ACPI: (supports S0 S1 S3 S4 S5)
[    7.751492] ACPI: Using PIC for interrupt routing
[    7.758003] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    7.758197] Enabling SiS 96x SMBus.
[    7.759045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    7.759190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    7.770732] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 15)
[    7.770818] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 15)
[    7.770902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 15)
[    7.770985] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11 15)
[    7.771067] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 14 15)
[    7.771158] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 14 15)
[    7.771234] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    7.771319] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 14 15)
[    7.771442] Linux Plug and Play Support v0.97 (c) Adam Belay
[    7.771476] pnp: PnP ACPI init
[    7.771487] ACPI: bus type pnp registered
[    7.774917] pnp: PnP ACPI: found 16 devices
[    7.774920] ACPI: ACPI bus type pnp unregistered
[    7.774925] PnPBIOS: Disabled by ACPI PNP
[    7.775169] PCI: Using ACPI for IRQ routing
[    7.775173] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    7.796465] NET: Registered protocol family 8
[    7.796467] NET: Registered protocol family 20
[    7.796548] AppArmor: AppArmor Filesystem Enabled
[    7.800444] Time: tsc clocksource has been installed.
[    7.808464] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    7.808468] system 00:00: iomem range 0xd0000-0xdbfff has been reserved
[    7.808470] system 00:00: iomem range 0xdc000-0xdfffe has been reserved
[    7.808472] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    7.808475] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[    7.808478] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[    7.808485] system 00:02: ioport range 0xe400-0xe47f has been reserved
[    7.808488] system 00:02: ioport range 0xe480-0xe4ff has been reserved
[    7.808490] system 00:02: ioport range 0xe800-0xe81f has been reserved
[    7.808492] system 00:02: ioport range 0x480-0x48f has been reserved
[    7.808495] system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
[    7.808503] system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
[    7.808508] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    7.808510] system 00:04: ioport range 0x800-0x87f has been reserved
[    7.808512] system 00:04: ioport range 0x880-0x88f has been reserved
[    7.808523] system 00:0d: ioport range 0x3f0-0x3f1 has been reserved
[    7.808525] system 00:0d: ioport range 0x290-0x297 has been reserved
[    7.808528] system 00:0d: ioport range 0x500-0x507 has been reserved
[    7.838889] PCI: Bridge: 0000:00:01.0
[    7.838893]   IO window: d000-dfff
[    7.838898]   MEM window: e7800000-e7ffffff
[    7.838902]   PREFETCH window: eff00000-febfffff
[    7.838908] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[    7.838909]   IO window: 00001000-000010ff
[    7.838913]   IO window: 00001400-000014ff
[    7.838917]   PREFETCH window: 30000000-33ffffff
[    7.838921]   MEM window: 34000000-37ffffff
[    7.838934] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    7.839226] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    7.839229] PCI: setting IRQ 11 as level-triggered
[    7.839233] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[    7.839250] NET: Registered protocol family 2
[    7.876330] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    7.876558] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    7.876653] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    7.876746] TCP: Hash tables configured (established 16384 bind 16384)
[    7.876749] TCP reno registered
[    7.888361] checking if image is initramfs... it is
[    8.339029] Switched to high resolution mode on CPU 0
[    8.460413] Freeing initrd memory: 7693k freed
[    8.460659] Simple Boot Flag at 0x3a set to 0x1
[    8.461064] audit: initializing netlink socket (disabled)
[    8.461086] audit(1209572930.152:1): initialized
[    8.463127] VFS: Disk quotas dquot_6.5.1
[    8.463206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    8.463366] io scheduler noop registered
[    8.463368] io scheduler anticipatory registered
[    8.463370] io scheduler deadline registered
[    8.463383] io scheduler cfq registered (default)
[    8.463429] Boot video device is 0000:01:00.0
[    8.463706] isapnp: Scanning for PnP cards...
[    8.816476] isapnp: No Plug & Play device found
[    8.845537] Real Time Clock Driver v1.12ac
[    8.845719] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    8.846274] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    8.847079] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    8.847083] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[    8.847093] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[    8.847757] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    8.847827] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    8.847942] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    8.848938] i8042.c: Detected active multiplexing controller, rev 1.1.
[    8.849361] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.849366] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    8.849368] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    8.849370] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    8.849372] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    8.857712] mice: PS/2 mouse device common for all mice
[    8.857842] EISA: Probing bus 0 at eisa.0
[    8.857850] Cannot allocate resource for EISA slot 1
[    8.857874] EISA: Detected 0 cards.
[    8.857878] cpuidle: using governor ladder
[    8.857880] cpuidle: using governor menu
[    8.857982] NET: Registered protocol family 1
[    8.858015] Using IPI No-Shortcut mode
[    8.858055] registered taskstats version 1
[    8.858143]   Magic number: 4:864:490
[    8.858270]   hash matches device PNP0F13:00
[    8.858282] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    8.858284] EDD information not available.
[    8.858783] Freeing unused kernel memory: 364k freed
[    8.862873] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   10.069714] fuse init (API version 7.9)
[   10.091465] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   10.091473] ACPI: Processor [CPU0] (supports 8 throttling states)
[   10.092947] ACPI: Thermal Zone [THRM] (42 C)
[   10.700007] SCSI subsystem initialized
[   10.764506] libata version 3.00 loaded.
[   10.776512] usbcore: registered new interface driver usbfs
[   10.776540] usbcore: registered new interface driver hub
[   10.788760] usbcore: registered new device driver usb
[   10.803691] sis900.c: v1.08.10 Apr. 2 2006
[   10.804058] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   10.804061] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   10.805093] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   10.815624] 0000:00:04.0: Using transceiver found at address 1 as default
[   10.818074] eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:11:2f:16:a3:bc
[   10.847496] pata_sis 0000:00:02.5: version 0.5.2
[   10.860353] scsi0 : pata_sis
[   10.872229] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.884982] scsi1 : pata_sis
[   10.885444] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[   10.885447] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[   11.213362] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[   11.213367] ata1.00: 312581808 sectors, multi 16: LBA48
[   11.213393] ata1.01: ATAPI: TOSHIBA DVD-ROM SD-R2512, 1720, max UDMA/33
[   11.229242] ata1.00: configured for UDMA/100
[   11.415042] ata1.01: configured for UDMA/33
[   11.415103] ata2: port disabled. ignoring.
[   11.415261] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[   11.420692] scsi 0:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-R2512 1720 PQ: 0 ANSI: 5
[   11.421213] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 4
[   11.421217] PCI: setting IRQ 4 as level-triggered
[   11.421221] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 4 (level, low) -> IRQ 4
[   11.421237] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   11.421638] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   11.421657] ohci_hcd 0000:00:03.0: irq 4, io mem 0xe7000000
[   11.476722] usb usb1: configuration #1 chosen from 1 choice
[   11.476749] hub 1-0:1.0: USB hub found
[   11.476758] hub 1-0:1.0: 3 ports detected
[   11.578632] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 4
[   11.578638] ACPI: PCI Interrupt 0000:00:03.1 -> Link [LNKF] -> GSI 4 (level, low) -> IRQ 4
[   11.578658] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   11.578688] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   11.578703] ohci_hcd 0000:00:03.1: irq 4, io mem 0xe6800000
[   11.606563] Driver 'sd' needs updating - please use bus_type methods
[   11.606669] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   11.606684] sd 0:0:0:0: [sda] Write Protect is off
[   11.606687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.606706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.606760] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   11.606771] sd 0:0:0:0: [sda] Write Protect is off
[   11.606773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.606791] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.606796]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   11.636224] usb usb2: configuration #1 chosen from 1 choice
[   11.636251] hub 2-0:1.0: USB hub found
[   11.636260] hub 2-0:1.0: 3 ports detected
[   11.650924]  sda1 sda2 sda3
[   11.654513] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.660614] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.660637] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   11.708061] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   11.708068] Uniform CD-ROM driver Revision: 3.20
[   11.708134] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   11.738588] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
[   11.738594] ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 4 (level, low) -> IRQ 4
[   11.738610] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   11.738660] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   11.738696] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[   11.738704] ehci_hcd 0000:00:03.3: irq 4, io mem 0xe6000000
[   11.749786] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   11.749943] usb usb3: configuration #1 chosen from 1 choice
[   11.749970] hub 3-0:1.0: USB hub found
[   11.749977] hub 3-0:1.0: 6 ports detected
[   11.854070] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   11.854076] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   11.873561] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0c.0
[   11.873742] ACPI: PCI Interrupt 0000:00:0a.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   11.926469] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[e5000000-e50007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   12.085276] Attempting manual resume
[   12.085281] swsusp: Resume From Partition 8:2
[   12.085283] PM: Checking swsusp image.
[   12.085506] PM: Resume from disk failed.
[   12.110816] kjournald starting.  Commit interval 5 seconds
[   12.110835] EXT3-fs: mounted filesystem with ordered data mode.
[   12.419987] usb 2-3: new low speed USB device using ohci_hcd and address 2
[   12.631531] usb 2-3: configuration #1 chosen from 1 choice
[   13.221945] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800031bd017]
[   18.395871] Linux agpgart interface v0.102
[   18.440408] agpgart: Detected SiS chipset - id:1608
[   18.445125] agpgart: AGP aperture is 64M @ 0xe8000000
[   18.495621] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.535598] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.651266] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe800
[   18.763893] input: Power Button (FF) as /devices/virtual/input/input2
[   18.782771] ACPI: Power Button (FF) [PWRF]
[   18.782903] input: Lid Switch as /devices/virtual/input/input3
[   18.782973] ACPI: Lid Switch [liD]
[   18.783030] input: Power Button (CM) as /devices/virtual/input/input4
[   18.794740] ACPI: Power Button (CM) [PWRB]
[   18.794882] input: Sleep Button (CM) as /devices/virtual/input/input5
[   18.810703] ACPI: Sleep Button (CM) [SLPB]
[   18.907150] ACPI: AC Adapter [AC] (on-line)
[   19.070820] asus-laptop: Asus Laptop Support version 0.42
[   19.073719] asus-laptop:   A2C model detected
[   19.174867] ACPI: Battery Slot [BAT0] (battery present)
[   20.434871] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input6
[   20.450282] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   20.804200] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   21.104542] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[   21.104582] [fglrx] ASYNCIO init succeed!
[   21.104715] [fglrx] PAT is enabled successfully!
[   21.106087] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   21.289376] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1814]
[   21.321389] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   21.416244] Yenta: ISA IRQ mask 0x0488, PCI irq 11
[   21.416250] Socket status: 30000006
[   21.431867] ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   21.617861] usbcore: registered new interface driver hiddev
[   21.627429] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb2/2-3/2-3:1.0/input/input8
[   21.639205] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:03.1-3
[   21.639228] usbcore: registered new interface driver usbhid
[   21.639232] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   21.887559] irda_init()
[   21.887586] NET: Registered protocol family 23
[   22.033612] b43-phy0: Broadcom 4306 WLAN found
[   22.087365] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[   22.106198] phy0: Selected rate control algorithm 'simple'
[   22.124663] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   22.152376] parport_pc 00:09: reported by Plug and Play ACPI
[   22.152429] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   22.177823] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   22.177827] wbsd: Copyright(c) Pierre Ossman
[   22.254803] mmc0: W83L51xD id 7112 at 0x248 irq 6 FIFO PnP
[   22.257388] intel8x0_measure_ac97_clock: measured 53649 usecs
[   22.257391] intel8x0: clocking to 48000
[   22.328552] mmc0: card lacks mandatory switch function, performance might suffer.
[   22.329654] mmc0: new SD card at address b368
[   23.933496] input: b43-phy0 as /devices/virtual/input/input10
[   24.007427] cs: IO port probe 0x100-0x3af: excluding 0x240-0x24f
[   24.009076] cs: IO port probe 0x3e0-0x4ff: clean.
[   24.009755] cs: IO port probe 0x820-0x8ff: clean.
[   24.010075] cs: IO port probe 0xc00-0xcf7: clean.
[   24.010829] cs: IO port probe 0xa00-0xaff: clean.
[   24.112565] isa bounce pool size: 16 pages
[   24.120653] mmcblk0: mmc0:b368 SDC   999936KiB
[   24.120709]  mmcblk0: p1
[   25.896837] Registered led device: b43-phy0:tx
[   25.896857] Registered led device: b43-phy0:rx
[   25.896875] Registered led device: b43-phy0:assoc
[   25.896893] Registered led device: b43-phy0:radio
[   25.960984] lp0: using parport0 (interrupt-driven).
[   26.095443] Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
[   26.368156] NET: Registered protocol family 10
[   26.368441] lo: Disabled Privacy Extensions
[   26.369447] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.659152] EXT3 FS on sda3, internal journal
[   26.761240] wlan0: Initial auth_alg=0
[   26.761248] wlan0: authenticate with AP 00:c0:49:5a:61:e2
[   26.764228] wlan0: RX authentication from 00:c0:49:5a:61:e2 (alg=0 transaction=2 status=0)
[   26.764230] wlan0: authenticated
[   26.764233] wlan0: associate with AP 00:c0:49:5a:61:e2
[   26.770136] wlan0: RX AssocResp from 00:c0:49:5a:61:e2 (capab=0x61 status=0 aid=2)
[   26.770139] wlan0: associated
[   26.770142] wlan0: CTS protection enabled (BSSID=00:c0:49:5a:61:e2)
[   26.770524] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   27.431205] kjournald starting.  Commit interval 5 seconds
[   27.435508] EXT3 FS on sda1, internal journal
[   27.435513] EXT3-fs: mounted filesystem with ordered data mode.
[   27.985269] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.496631] No dock devices found.
[   29.622187] apm: BIOS not found.
[   29.859356] ppdev: user-space parallel port driver
[   30.066669] audit(1209572951.771:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5053 profile="/usr/sbin/cupsd" namespace="default"
[   31.919232] eth0: Media Link Off
[   31.919615] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.078074] Bluetooth: Core ver 2.11
[   32.079194] NET: Registered protocol family 31
[   32.079200] Bluetooth: HCI device and connection manager initialized
[   32.079205] Bluetooth: HCI socket layer initialized
[   32.099947] Bluetooth: L2CAP ver 2.9
[   32.099952] Bluetooth: L2CAP socket layer initialized
[   32.153246] Bluetooth: RFCOMM socket layer initialized
[   32.153270] Bluetooth: RFCOMM TTY layer initialized
[   32.153272] Bluetooth: RFCOMM ver 1.8
[   34.230923] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   36.737778] [fglrx] Internal AGP support requested, but kernel AGP support active.
[   36.737788] [fglrx] Have to use kernel AGP support to avoid conflicts.
[   36.737792] [fglrx] AGP detected, AgpState   = 0x1f004e1b (hardware caps of chipset)
[   36.740046] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   36.740663] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   36.740668] agpgart: SiS delay workaround: giving bridge time to recover.
[   36.754250] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   36.754878] [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[   36.759954] [fglrx] GART Table is not in FRAME_BUFFER range
[   36.759967] [fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[   36.759969] [fglrx] Reserve Block - 1 offset =  0X3ff5000 length = 0Xb000
[   36.884739] [fglrx] interrupt source 20008000 successfully enabled
[   36.884748] [fglrx] enable ID = 0x00000004
[   36.885919] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[   36.886655] [fglrx] interrupt source 10000000 successfully enabled
[   36.886658] [fglrx] enable ID = 0x00000005
[   36.887592] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   37.196998] wlan0: no IPv6 routers present
[ 1670.978555] mmc0: card b368 removed
[ 3230.957601] Marking TSC unstable due to: cpufreq changes.
[ 3230.964783] Time: acpi_pm clocksource has been installed.
[ 1684.165122] Clocksource tsc unstable (delta = -109372608 ns)
[ 1776.130842] mmc0: card lacks mandatory switch function, performance might suffer.
[ 1776.132283] mmc0: new SD card at address b368
[ 1776.132519] mmcblk0: mmc0:b368 SDC   999936KiB
[ 1776.132561]  mmcblk0: p1

Оффлайн kobaltd

  • Автор темы
  • Активист
  • *
  • Сообщений: 264
    • Просмотр профиля
Re: Ubuntu 8.04 и ASUS A2800S + RICOH кардридер
« Ответ #4 : 03 Май 2008, 23:55:41 »
Ни у кого ни какиз идей? :(

 

Страница сгенерирована за 0.061 секунд. Запросов: 22.