Расшарить папку для винды

[Vital75]

Помогите расшарить папку, с винды вижу ее, только не могу открыть:


smb.conf

Код: [Выделить]

#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]
passdb backend = tdbsam
usershare allow guests = yes
null passwords = yes
syslog = 0
winbind trusted domains only = yes
security = ads
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
workgroup = WORKGROUP
log file = /var/log/samba/log.%m
winbind use default domain = yes
os level = 20
panic action = /usr/share/samba/panic-action %d
pam password change = yes
dns proxy = no
max log size = 1000
obey pam restrictions = yes
unix password sync = yes
wins server = server
map to guest = bad user
passwd program = /usr/bin/passwd %u
server role = standalone server

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field
#security = user
#guest account = nobody
#interfaces = 192.168.137.1/24
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 


# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin


[test]
writeable = yes
path = /home/test
directory mode = 777
create mode = 777
guest only = yes
public = yes
     

ТС не появлялся на Форуме более полугода по состоянию на 14/07/2019 (последняя явка: 01/06/2018). Модератором раздела принято решение закрыть тему.
--zg_nico

[victor00000]

Код: [Выделить]

ls -dl /home/test
?

[Vital75]

root@server:/home/vital# ls -dl /home/test
drwxr-xr-x 2 nobody nogroup 4096 марта 19 09:29 /home/test

[victor00000]

Код: [Выделить]

smbclient //127.0.0.1/test -c "ls" -N
?

[Vital75]

Код: [Выделить]

root@server:/home/vital# smbclient //127.0.0.1/test -c "ls" -N
Unknown parameter encountered: "share modes"
Ignoring unknown parameter "share modes"
Anonymous login successful
Domain=[WORKGROUP] OS=[Windows 6.1] Server=[Samba 4.3.11-Ubuntu]
  .                                   D        0  Sun Mar 19 09:29:29 2017
  ..                                  D        0  Sun Mar 19 09:29:29 2017

                471943472 blocks of size 1024. 392123508 blocks available


[Azure]

testparm запускали?

[victor00000]

Vital75,
пустую, а ну создать папка.

Код: [Выделить]

smbclient //127.0.0.1/test -c "mkdir test1;ls" -N
?

[Vital75]

Vital75,
пустую, а ну создать папка.

Код: [Выделить]

smbclient //127.0.0.1/test -c "mkdir test1;ls" -N
?

Код: [Выделить]

root@server:/home/vital# smbclient //127.0.0.1/test -c "mkdir test1;ls" -N
Domain=[WORKGROUP] OS=[Windows 6.1] Server=[Samba 4.3.11-Ubuntu]
NT_STATUS_CONNECTION_DISCONNECTED making remote directory \test1
NT_STATUS_CONNECTION_DISCONNECTED listing \*
Пользователь добавил сообщение 19 Марта 2017, 11:27:06:

testparm запускали?

Код: [Выделить]

root@server:/home/vital# testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Processing section "[test]"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
        server string = server
        server role = standalone server
        security = USER
        map to guest = Bad User
        obey pam restrictions = Yes
        pam password change = Yes
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:                                                                                                 * %n\n *password\supdated\ssuccessfully* .
        unix password sync = Yes
        log file = /var/log/samba/log.%m
        max log size = 1000
        dns proxy = No
        usershare allow guests = Yes
        panic action = /usr/share/samba/panic-action %d
        idmap config * : backend = tdb


[printers]
        comment = All Printers
        path = /var/spool/samba
        create mask = 0700
        printable = Yes
        browseable = No


[print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers


[test]
        comment = Ubuntu File Server Share
        path = /home/test
        read only = No
        create mask = 0755
        guest ok = Yes


[victor00000]

Vital75,
вот проблема нашёл.

Код: [Выделить]

[test]
writeable = yes
path = /home/test
directory mode = 777
create mode = 777
guest only = yes
public = yes
     



на

Код: [Выделить]

[test]
path = /home/test
directory mode = 777
create mode = 777
        guest ok=yes
        read only=no
рестарт
и

Vital75,
пустую, а ну создать папка.

Код: [Выделить]

smbclient //127.0.0.1/test -c "mkdir test1;ls" -N
?

[Vital75]

smbclient //127.0.0.1/test -c "mkdir test1;ls" -N

вот проблема нашёл.
Цитировать
Код: [Выделить]
[test]
   writeable = yes
   path = /home/test
   directory mode = 777
   create mode = 777
   guest only = yes
   public = yes
     

на
Код: [Выделить]
[test]
   path = /home/test
   directory mode = 777
   create mode = 777
        guest ok=yes
        read only=no
рестарт


и
Цитата: victor00000 от Сегодня в 12:22:15
Vital75,
пустую, а ну создать папка.
Код: [Выделить]
smbclient //127.0.0.1/test -c "mkdir test1;ls" -N
?

поменял, рестартанул - результат тот же(((

[victor00000]

NT_STATUS_CONNECTION_DISCONNECTED listing \*

я думал кабеля плохой.
вы smb.conf был полность настроен?
я не вниманию.