fancontrol - "Fan # has not returned to speed, please investigate!"

[WalkWeb]

Здравствуйте

Вот уже 2 часа занимаюсь любовью с настройкой скорости вращения кулеров через fancontrol.
Пока, почему-то, получается только сделать системник громче (кулеры начинают крутиться на максималках), но не тише.

Раз в десятый переустанавливая конфиг бросилось в глаза обилие предупреждений "Fan # has not returned to speed, please investigate!":

Код: [Выделить]

Warning!!! This program will stop your fans, one at a time,
for approximately 5 seconds each!!!
This may cause your processor temperature to rise!!!
If you do not want to do this hit control-C now!!!
Hit return to continue:

Testing pwm control hwmon0/pwm1 ...
  hwmon0/fan1_input ... speed was 4410 now 1110
    It appears that fan hwmon0/fan1_input
    is controlled by pwm hwmon0/pwm1
    Fan hwmon0/fan1_input has not returned to speed, please investigate!
  hwmon1/fan2_input ... speed was 1904 now 1904
    no correlation

Testing pwm control hwmon1/pwm1 ...
  hwmon0/fan1_input ... speed was 4410 now 1110
    It appears that fan hwmon0/fan1_input
    is controlled by pwm hwmon1/pwm1
    Fan hwmon0/fan1_input has not returned to speed, please investigate!
  hwmon1/fan2_input ... speed was 1904 now 1912
    no correlation

Testing pwm control hwmon1/pwm2 ...
  hwmon0/fan1_input ... speed was 4410 now 1140
    It appears that fan hwmon0/fan1_input
    is controlled by pwm hwmon1/pwm2
    Fan hwmon0/fan1_input has not returned to speed, please investigate!
  hwmon1/fan2_input ... speed was 1904 now 593
    It appears that fan hwmon1/fan2_input
    is controlled by pwm hwmon1/pwm2
Would you like to generate a detailed correlation (y)? n

Testing pwm control hwmon1/pwm3 ...
  hwmon0/fan1_input ... speed was 4410 now 1170
    It appears that fan hwmon0/fan1_input
    is controlled by pwm hwmon1/pwm3
    Fan hwmon0/fan1_input has not returned to speed, please investigate!
  hwmon1/fan2_input ... speed was 1904 now 1906
    no correlation

Testing pwm control hwmon1/pwm4 ...
  hwmon0/fan1_input ... speed was 4410 now 1170
    It appears that fan hwmon0/fan1_input
    is controlled by pwm hwmon1/pwm4
    Fan hwmon0/fan1_input has not returned to speed, please investigate!
  hwmon1/fan2_input ... speed was 1904 now 1901
    no correlation

...

В чем причина таких ошибок?



ТС не появлялся на Форуме более полугода по состоянию на 22/07/2019 (последняя явка: 01/11/2018). Модератором раздела принято решение закрыть тему.
--zg_nico

[Morisson]

Что за девайс у вас?

[WalkWeb]

материнка: A320 mATX AM4
видеокарта: ASUS GeForce GTX 750
кулер на процессоре: AMD DK9-9ID2A-0L-GP 65 Вт

остальное думаю не важно.
Пользователь добавил сообщение 29 Октября 2018, 10:07:29:И ручное управлене кулерами тоже не работает

Из руководства:

Смотрим доступные устройства:

$ ls /sys/class/hwmon/hwmon1/device/ | grep pwm

У меня ничего не выводит. Пустота.

[БТР]

WalkWeb, какой дистрибутив? Версия BIOS на материнской плате последняя?