Ubuntu перестала загружаться после обновления

[arslan]

Ubuntu предложила обновиться с 22.04 до 22.04.1. Обновился, и при первой же загрузке система повисла - только крутится значок загрузки системы под надписью Ubuntu. В чем может быть проблема и как ее решить?

[Usermaster]

Esc нажать во время загрузки и посмотреть на чём стопорится.

[jurganov]

как ее решить?

поглядеть в логах ошибку

[arslan]

Кое-как добился того, что ubuntu загружать, но без Х сервера. Запустить не получается ((

[andytux]

"Закопайте уже стюардессу..."

Кое-как добил...

...и продолжаешь добивать.
Самое банальное, место свободное есть?

[arslan]

"Закопайте уже стюардессу..."

Кое-как добил...

...и продолжаешь добивать.
Самое банальное, место свободное есть?

6 гб минимум есть свободные.

[andytux]

6 гб минимум есть свободные.

При обновлении, это все-равно что ничего. А если раздел 120гб, то они могут вообще оказаться "несвободными".

[arslan]

"Закопайте уже стюардессу..."

Кое-как добил...

...и продолжаешь добивать.
Самое банальное, место свободное есть?

при загрузке системы было много failed и одно из них то что не запускается LIGHTDM.

[andytux]

Так, снова да ладом.

Ubuntu предложила обновиться с 22.04...
...не запускается LIGHTDM

Откуда в Ubuntu lightdm? Нет, мне не интересно. Пока будете смешивать молоко с селёдкой, будет соответствующий выхлоп.

[artemu88]

arslan, а если его остановить:
после загрузки без X выполнить:

Код: [Выделить]

sudo systemctl disable --now lightdm.serviceпотом проверить его статус (должен быть disable и inactive):

Код: [Выделить]

sudo systemctl status lightdm.serviceпотом удалить его:

Код: [Выделить]

sudo apt remove --purge lightdm*и установить по новой:

Код: [Выделить]

sudo apt install lightdmпотом включить его:

Код: [Выделить]

sudo systemctl enable --now lightdm.serviceпочитать про lightdm

Если совет выше из моего сообщения не помог, то можно Вас попросить выложить содержимое файла /var/log/Xorg.0.log.
Спасибо!

[arslan]

arslan, а если его остановить:
после загрузки без X выполнить:

Код: [Выделить]

sudo systemctl disable --now lightdm.serviceпотом проверить его статус (должен быть disable и inactive):

Код: [Выделить]

sudo systemctl status lightdm.serviceпотом удалить его:

Код: [Выделить]

sudo apt remove --purge lightdm*и установить по новой:

Код: [Выделить]

sudo apt install lightdmпотом включить его:

Код: [Выделить]

sudo systemctl enable --now lightdm.serviceпочитать про lightdm

Если совет выше из моего сообщения не помог, то можно Вас попросить выложить содержимое файла /var/log/Xorg.0.log.
Спасибо!

(Нажмите, чтобы показать/скрыть)

[  4849.965]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[  4849.966] Current Operating System: Linux arslan-Lenovo-G50-30 5.15.0-92-generic #102-Ubuntu SMP Wed Jan 10 09:33:48 UTC 2024 x86_64
[  4849.966] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-92-generic root=UUID=00d9323e-7b6e-4e82-9c7c-14f20829228f ro quiet splash intel_idle.max_cstate=1 vt.handoff=7
[  4849.966] xorg-server 2:21.1.4-2ubuntu1.7~22.04.7 (For technical support please see http://www.ubuntu.com/support)
[  4849.966] Current version of pixman: 0.40.0
[  4849.966]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[  4849.966] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4849.966] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Feb  2 07:54:09 2024
[  4849.967] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4849.967] (==) No Layout section.  Using the first Screen section.
[  4849.967] (==) No screen section available. Using defaults.
[  4849.967] (**) |-->Screen "Default Screen Section" (0)
[  4849.968] (**) |   |-->Monitor "<default monitor>"
[  4849.968] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[  4849.968] (==) Automatically adding devices
[  4849.968] (==) Automatically enabling devices
[  4849.968] (==) Automatically adding GPU devices
[  4849.968] (==) Automatically binding GPU devices
[  4849.968] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  4849.968] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  4849.969]    Entry deleted from font path.
[  4849.969] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  4849.969]    Entry deleted from font path.
[  4849.969] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  4849.969]    Entry deleted from font path.
[  4849.969] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  4849.969]    Entry deleted from font path.
[  4849.969] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  4849.969]    Entry deleted from font path.
[  4849.969] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[  4849.969] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4849.969] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4849.969] (II) Loader magic: 0x55c5efc21020
[  4849.969] (II) Module ABI versions:
[  4849.969]    X.Org ANSI C Emulation: 0.4
[  4849.969]    X.Org Video Driver: 25.2
[  4849.969]    X.Org XInput driver : 24.4
[  4849.969]    X.Org Server Extension : 10.0
[  4849.971] (++) using VT number 8

[  4849.971] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  4849.974] (II) xfree86: Adding drm device (/dev/dri/card0)
[  4849.974] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[  4849.981] (--) PCI:*(0@0:2:0) 8086:0f31:17aa:3905 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00003050/8, BIOS @ 0x??/131072
[  4849.982] (II) LoadModule: "glx"
[  4849.982] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4849.984] (II) Module glx: vendor="X.Org Foundation"
[  4849.984]    compiled for 1.21.1.4, module version = 1.0.0
[  4849.984]    ABI class: X.Org Server Extension, version 10.0
[  4849.985] (==) Matched modesetting as autoconfigured driver 0
[  4849.985] (==) Matched fbdev as autoconfigured driver 1
[  4849.985] (==) Matched vesa as autoconfigured driver 2
[  4849.985] (==) Assigned the driver to the xf86ConfigLayout
[  4849.985] (II) LoadModule: "modesetting"
[  4849.985] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  4849.985] (II) Module modesetting: vendor="X.Org Foundation"
[  4849.985]    compiled for 1.21.1.4, module version = 1.21.1
[  4849.986]    Module class: X.Org Video Driver
[  4849.986]    ABI class: X.Org Video Driver, version 25.2
[  4849.986] (II) LoadModule: "fbdev"
[  4849.986] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  4849.986] (II) Module fbdev: vendor="X.Org Foundation"
[  4849.986]    compiled for 1.21.1.3, module version = 0.5.0
[  4849.986]    Module class: X.Org Video Driver
[  4849.986]    ABI class: X.Org Video Driver, version 25.2
[  4849.986] (II) LoadModule: "vesa"
[  4849.987] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  4849.987] (II) Module vesa: vendor="X.Org Foundation"
[  4849.987]    compiled for 1.21.1.3, module version = 2.5.0
[  4849.987]    Module class: X.Org Video Driver
[  4849.987]    ABI class: X.Org Video Driver, version 25.2
[  4849.987] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  4849.987] (II) FBDEV: driver for framebuffer: fbdev
[  4849.987] (II) VESA: driver for VESA chipsets: vesa
[  4850.243] (II) modeset(0): using drv /dev/dri/card0
[  4850.243] (WW) Falling back to old probe method for fbdev
[  4850.243] (II) Loading sub module "fbdevhw"
[  4850.243] (II) LoadModule: "fbdevhw"
[  4850.244] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  4850.244] (II) Module fbdevhw: vendor="X.Org Foundation"
[  4850.244]    compiled for 1.21.1.4, module version = 0.0.2
[  4850.244]    ABI class: X.Org Video Driver, version 25.2
[  4850.244] (II) modeset(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[  4850.244] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  4850.245] (==) modeset(0): RGB weight 888
[  4850.245] (==) modeset(0): Default visual is TrueColor
[  4850.245] (II) Loading sub module "glamoregl"
[  4850.245] (II) LoadModule: "glamoregl"
[  4850.245] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  4850.254] (II) Module glamoregl: vendor="X.Org Foundation"
[  4850.254]    compiled for 1.21.1.4, module version = 1.0.1
[  4850.254]    ABI class: X.Org ANSI C Emulation, version 0.4
[  4850.354] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (BYT)
[  4850.354] (II) modeset(0): glamor initialized
[  4850.354] (==) modeset(0): VariableRefresh: disabled
[  4850.354] (==) modeset(0): AsyncFlipSecondaries: disabled
[  4850.356] (II) modeset(0): Output eDP-1 has no monitor section
[  4850.365] (II) modeset(0): Output VGA-1 has no monitor section
[  4850.365] (II) modeset(0): Output DP-1 has no monitor section
[  4850.367] (II) modeset(0): Output HDMI-1 has no monitor section
[  4850.370] (II) modeset(0): EDID for output eDP-1
[  4850.370] (II) modeset(0): Manufacturer: LGD  Model: 44b  Serial#: 0
[  4850.370] (II) modeset(0): Year: 2013  Week: 0
[  4850.370] (II) modeset(0): EDID Version: 1.4
[  4850.370] (II) modeset(0): Digital Display Input
[  4850.370] (II) modeset(0): 6 bits per channel
[  4850.370] (II) modeset(0): Digital interface is DisplayPort
[  4850.370] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  4850.371] (II) modeset(0): Gamma: 2.20
[  4850.371] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[  4850.371] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[  4850.371] (II) modeset(0): First detailed timing is preferred mode
[  4850.371] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  4850.371] (II) modeset(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[  4850.371] (II) modeset(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[  4850.371] (II) modeset(0): Manufacturer's mask: 0
[  4850.372] (II) modeset(0): Supported detailed timing:
[  4850.372] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[  4850.372] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[  4850.372] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[  4850.372] (II) modeset(0):  LG Display
[  4850.372] (II) modeset(0):  LP156WH3-TPSH
[  4850.372] (II) modeset(0): EDID (in hex):
[  4850.372] (II) modeset(0):    00ffffffffffff0030e44b0400000000
[  4850.373] (II) modeset(0):    0017010495221378ea05f59458569228
[  4850.373] (II) modeset(0):    1e505400000001010101010101010101
[  4850.373] (II) modeset(0):    010101010101ce1d56f4500016303020
[  4850.373] (II) modeset(0):    350058c2100000190000000000000000
[  4850.373] (II) modeset(0):    00000000000000000000000000fe004c
[  4850.373] (II) modeset(0):    4720446973706c61790a2020000000fe
[  4850.373] (II) modeset(0):    004c503135365748332d5450534800bb
[  4850.375] (II) modeset(0): Printing probed modes for output eDP-1
[  4850.375] (II) modeset(0): Modeline "1366x768"x60.0   76.30  1366 1414 1446 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[  4850.375] (II) modeset(0): Modeline "1280x720"x60.0   64.01  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "1024x768"x60.0   64.98  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  4850.376] (II) modeset(0): Modeline "960x720"x60.0  116.98  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  4850.376] (II) modeset(0): Modeline "928x696"x60.0  109.04  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.3 kHz d)
[  4850.376] (II) modeset(0): Modeline "896x672"x60.0  102.36  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.6 kHz d)
[  4850.376] (II) modeset(0): Modeline "1024x576"x60.0   42.12  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.6 kHz d)
[  4850.376] (II) modeset(0): Modeline "960x600"x60.0   76.99  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[  4850.376] (II) modeset(0): Modeline "960x540"x60.0   37.36  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.4 kHz d)
[  4850.376] (II) modeset(0): Modeline "800x600"x60.0   38.39  800 824 896 1024  600 601 603 625 +hsync +vsync (37.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "840x525"x60.0   59.60  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.8 kHz d)
[  4850.376] (II) modeset(0): Modeline "864x486"x60.0   30.71  864 912 944 1024  486 489 494 500 +hsync -vsync (30.0 kHz d)
[  4850.376] (II) modeset(0): Modeline "700x525"x60.0   61.01  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  4850.376] (II) modeset(0): Modeline "800x450"x60.0   48.88  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "640x512"x60.0   53.97  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (63.9 kHz d)
[  4850.376] (II) modeset(0): Modeline "700x450"x60.0   43.33  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "720x405"x60.0   22.12  720 768 800 880  405 408 413 419 +hsync -vsync (25.1 kHz d)
[  4850.376] (II) modeset(0): Modeline "684x384"x60.0   36.21  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[  4850.376] (II) modeset(0): Modeline "640x360"x60.0   17.95  640 688 720 800  360 363 368 374 +hsync -vsync (22.4 kHz d)
[  4850.376] (II) modeset(0): Modeline "512x384"x60.0   32.49  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.3 kHz d)
[  4850.376] (II) modeset(0): Modeline "512x288"x60.0   21.02  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[  4850.376] (II) modeset(0): Modeline "480x270"x60.0   18.68  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.4 kHz d)
[  4850.376] (II) modeset(0): Modeline "400x300"x60.0   19.16  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (37.4 kHz d)
[  4850.377] (II) modeset(0): Modeline "432x243"x60.0   15.36  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (30.0 kHz d)
[  4850.377] (II) modeset(0): Modeline "320x240"x60.0   12.57  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.4 kHz d)
[  4850.377] (II) modeset(0): Modeline "360x202"x60.0   11.03  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (25.1 kHz d)
[  4850.377] (II) modeset(0): Modeline "320x180"x60.0    8.97  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.4 kHz d)
[  4850.385] (II) modeset(0): EDID for output VGA-1
[  4850.385] (II) modeset(0): EDID for output DP-1
[  4850.386] (II) modeset(0): EDID for output HDMI-1
[  4850.386] (II) modeset(0): Output eDP-1 connected
[  4850.386] (II) modeset(0): Output VGA-1 disconnected
[  4850.386] (II) modeset(0): Output DP-1 disconnected
[  4850.387] (II) modeset(0): Output HDMI-1 disconnected
[  4850.387] (II) modeset(0): Using exact sizes for initial modes
[  4850.387] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[  4850.387] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  4850.387] (==) modeset(0): DPI set to (96, 96)
[  4850.387] (II) Loading sub module "fb"
[  4850.387] (II) LoadModule: "fb"
[  4850.387] (II) Module "fb" already built-in
[  4850.387] (II) UnloadModule: "fbdev"
[  4850.388] (II) Unloading fbdev
[  4850.388] (II) UnloadSubModule: "fbdevhw"
[  4850.388] (II) Unloading fbdevhw
[  4850.388] (II) UnloadModule: "vesa"
[  4850.389] (II) Unloading vesa
[  4850.435] (==) modeset(0): Backing store enabled
[  4850.436] (==) modeset(0): Silken mouse enabled
[  4850.532] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[  4850.532] (==) modeset(0): DPMS enabled
[  4850.533] (II) modeset(0): [DRI2] Setup complete
[  4850.533] (II) modeset(0): [DRI2]   DRI driver: crocus
[  4850.533] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[  4850.533] (II) Initializing extension Generic Event Extension
[  4850.534] (II) Initializing extension SHAPE
[  4850.534] (II) Initializing extension MIT-SHM
[  4850.535] (II) Initializing extension XInputExtension
[  4850.536] (II) Initializing extension XTEST
[  4850.537] (II) Initializing extension BIG-REQUESTS
[  4850.538] (II) Initializing extension SYNC
[  4850.538] (II) Initializing extension XKEYBOARD
[  4850.539] (II) Initializing extension XC-MISC
[  4850.540] (II) Initializing extension SECURITY
[  4850.540] (II) Initializing extension XFIXES
[  4850.541] (II) Initializing extension RENDER
[  4850.541] (II) Initializing extension RANDR
[  4850.542] (II) Initializing extension COMPOSITE
[  4850.542] (II) Initializing extension DAMAGE
[  4850.543] (II) Initializing extension MIT-SCREEN-SAVER
[  4850.543] (II) Initializing extension DOUBLE-BUFFER
[  4850.544] (II) Initializing extension RECORD
[  4850.544] (II) Initializing extension DPMS
[  4850.545] (II) Initializing extension Present
[  4850.545] (II) Initializing extension DRI3
[  4850.545] (II) Initializing extension X-Resource
[  4850.546] (II) Initializing extension XVideo
[  4850.546] (II) Initializing extension XVideo-MotionCompensation
[  4850.546] (II) Initializing extension SELinux
[  4850.546] (II) SELinux: Disabled on system
[  4850.546] (II) Initializing extension GLX
[  4850.564] (II) AIGLX: Loaded and initialized crocus
[  4850.564] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4850.564] (II) Initializing extension XFree86-VidModeExtension
[  4850.564] (II) Initializing extension XFree86-DGA
[  4850.564] (II) Initializing extension XFree86-DRI
[  4850.564] (II) Initializing extension DRI2
[  4850.566] (II) modeset(0): Damage tracking initialized
[  4850.566] (II) modeset(0): Setting screen physical size to 361 x 203
[  4850.687] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  4850.687] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  4850.687] (II) LoadModule: "libinput"
[  4850.688] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  4850.691] (II) Module libinput: vendor="X.Org Foundation"
[  4850.691]    compiled for 1.20.14, module version = 1.2.1
[  4850.691]    Module class: X.Org XInput Driver
[  4850.691]    ABI class: X.Org XInput driver, version 24.1
[  4850.692] (II) Using input driver 'libinput' for 'Power Button'
[  4850.692] (**) Power Button: always reports core events
[  4850.692] (**) Option "Device" "/dev/input/event2"
[  4850.698] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  4850.698] (II) event2  - Power Button: device is a keyboard
[  4850.699] (II) event2  - Power Button: device removed
[  4850.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  4850.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4850.729] (**) Option "xkb_model" "pc105"
[  4850.729] (**) Option "xkb_layout" "us,ru"
[  4850.729] (**) Option "xkb_variant" ","
[  4850.730] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4850.807] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  4850.807] (II) event2  - Power Button: device is a keyboard
[  4850.809] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  4850.809] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  4850.809] (II) Using input driver 'libinput' for 'Video Bus'
[  4850.809] (**) Video Bus: always reports core events
[  4850.809] (**) Option "Device" "/dev/input/event6"
[  4850.812] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[  4850.812] (II) event6  - Video Bus: device is a keyboard
[  4850.812] (II) event6  - Video Bus: device removed
[  4850.844] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[  4850.844] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  4850.845] (**) Option "xkb_model" "pc105"
[  4850.845] (**) Option "xkb_layout" "us,ru"
[  4850.845] (**) Option "xkb_variant" ","
[  4850.845] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4850.855] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[  4850.856] (II) event6  - Video Bus: device is a keyboard
[  4850.858] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  4850.858] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  4850.859] (II) Using input driver 'libinput' for 'Power Button'
[  4850.859] (**) Power Button: always reports core events
[  4850.859] (**) Option "Device" "/dev/input/event1"
[  4850.861] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  4850.861] (II) event1  - Power Button: device is a keyboard
[  4850.862] (II) event1  - Power Button: device removed
[  4850.888] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  4850.888] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[  4850.888] (**) Option "xkb_model" "pc105"
[  4850.888] (**) Option "xkb_layout" "us,ru"
[  4850.888] (**) Option "xkb_variant" ","
[  4850.894] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4850.900] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  4850.901] (II) event1  - Power Button: device is a keyboard
[  4850.903] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  4850.903] (II) No input driver specified, ignoring this device.
[  4850.903] (II) This device may have been added with another device file.
[  4850.906] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[  4850.906] (II) No input driver specified, ignoring this device.
[  4850.906] (II) This device may have been added with another device file.
[  4850.909] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[  4850.909] (II) No input driver specified, ignoring this device.
[  4850.909] (II) This device may have been added with another device file.
[  4850.911] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[  4850.911] (II) No input driver specified, ignoring this device.
[  4850.911] (II) This device may have been added with another device file.
[  4850.916] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event7)
[  4850.916] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[  4850.916] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[  4850.916] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[  4850.916] (**) Option "Device" "/dev/input/event7"
[  4850.923] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[  4850.924] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[  4850.924] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device removed
[  4850.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input8/event7"
[  4850.969] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 9)
[  4850.969] (**) Option "xkb_model" "pc105"
[  4850.969] (**) Option "xkb_layout" "us,ru"
[  4850.969] (**) Option "xkb_variant" ","
[  4850.969] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4850.977] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[  4850.977] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[  4850.981] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[  4850.981] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[  4850.981] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[  4850.981] (**) Ideapad extra buttons: always reports core events
[  4850.981] (**) Option "Device" "/dev/input/event5"
[  4850.984] (II) event5  - Ideapad extra buttons: is tagged by udev as: Keyboard
[  4850.984] (II) event5  - Ideapad extra buttons: device is a keyboard
[  4850.985] (II) event5  - Ideapad extra buttons: device removed
[  4851.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5"
[  4851.004] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 10)
[  4851.004] (**) Option "xkb_model" "pc105"
[  4851.004] (**) Option "xkb_layout" "us,ru"
[  4851.004] (**) Option "xkb_variant" ","
[  4851.004] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4851.007] (II) event5  - Ideapad extra buttons: is tagged by udev as: Keyboard
[  4851.007] (II) event5  - Ideapad extra buttons: device is a keyboard
[  4851.010] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  4851.010] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  4851.010] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  4851.010] (**) AT Translated Set 2 keyboard: always reports core events
[  4851.010] (**) Option "Device" "/dev/input/event3"
[  4851.012] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  4851.013] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  4851.014] (II) event3  - AT Translated Set 2 keyboard: device removed
[  4851.037] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[  4851.037] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  4851.037] (**) Option "xkb_model" "pc105"
[  4851.037] (**) Option "xkb_layout" "us,ru"
[  4851.037] (**) Option "xkb_variant" ","
[  4851.038] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  4851.043] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  4851.043] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  4851.047] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[  4851.047] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  4851.047] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[  4851.047] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[  4851.047] (II) LoadModule: "synaptics"
[  4851.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  4851.048] (II) Module synaptics: vendor="X.Org Foundation"
[  4851.048]    compiled for 1.20.8, module version = 1.9.1
[  4851.048]    Module class: X.Org XInput Driver
[  4851.048]    ABI class: X.Org XInput driver, version 24.1
[  4851.048] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[  4851.049] (**) ETPS/2 Elantech Touchpad: always reports core events
[  4851.049] (**) Option "Device" "/dev/input/event4"
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3082 (res 32)
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1508 (res 32)
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[  4851.088] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[  4851.089] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  4851.089] (**) ETPS/2 Elantech Touchpad: always reports core events
[  4851.132] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[  4851.132] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[  4851.132] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[  4851.132] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[  4851.132] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.058
[  4851.134] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[  4851.134] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[  4851.134] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  4851.134] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  4851.134] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  4851.137] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  4851.137] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  4860.532] (II) event2  - Power Button: device removed
[  4860.560] (II) event6  - Video Bus: device removed
[  4860.580] (II) event1  - Power Button: device removed
[  4860.612] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device removed
[  4860.652] (II) event5  - Ideapad extra buttons: device removed
[  4860.676] (II) event3  - AT Translated Set 2 keyboard: device removed
[  4860.744] (II) AIGLX: Suspending AIGLX clients for VT switch
[  4860.829] (II) UnloadModule: "synaptics"
[  4860.829] (II) UnloadModule: "libinput"
[  4860.829] (II) UnloadModule: "libinput"
[  4860.829] (II) UnloadModule: "libinput"
[  4860.829] (II) UnloadModule: "libinput"
[  4860.829] (II) UnloadModule: "libinput"
[  4860.830] (II) UnloadModule: "libinput"
[  4860.833] (II) Server terminated successfully (0). Closing log file.

Судя по количеству собщений вроде уже не салабон а сполером опльзоваться не умеешь.
Не надо такие простыни вывода выкладывать прямо в сообщение, ндо их под сполер выкладывать.
Сделал сполер твоего вывода.

Usermaster

[artemu88]

arslan, спасибо! Вроде бы все нормально. В Вашем сообщении выше прочитал, что много ошибок:

при загрузке системы было много failed

Можно еще попросить Вас выложить выхлоп команды:

Код: [Выделить]

sudo journalctl -bСпасибо!

[arslan]

arslan, спасибо! Вроде бы все нормально. В Вашем сообщении выше прочитал, что много ошибок:

при загрузке системы было много failed

Можно еще попросить Вас выложить выхлоп команды:

Код: [Выделить]

sudo journalctl -bСпасибо!

благодарю за внимание и хлопоты конкретно Вас! но решил не мудохаться и переустановить систему. заранее скопировав инфу на другой носитель. уже который раз обновление убунты происходит у меня с косяками. вроде оборудование новое..

[jurganov]

но решил не мудохаться и переустановить систему. заранее скопировав инфу на другой носитель. уже который раз обновление убунты происходит у меня с косяками. вроде оборудование новое..

чисто Windowsкий подход. Гробить систему и раз в месяц переставлять, вместо того, что бы понять что делал не так и не повторять ошибок