Увидели сообщение с непонятной ссылкой, спам, непристойность или оскорбление?Воспользуйтесь ссылкой «Сообщить модератору» рядом с сообщением!
0 Пользователей и 1 Гость просматривают эту тему.
# hdparm -Sx /dev/hdaThe Time (in seconds) after which the Drive spins down is the value of your x multiplied with 5 From the manpage:A value of zero means "timeouts are disabled": the device will not automatically enter standby mode.Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes.Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours.A value of 252 signifies a timeout of 21 minutes.A value of 253 sets a vendor-defined timeout period between 8 and 12 hours.A value of 255 is interpreted as 21 minutes plus 15 seconds.The value 254 is reserved.Note that some older drives may have very different interpretations of these values.Example:hdparm -S12 /dev/hdaNow the drive spins down after 1 minute. (12x5=60s) To turn it off choose x=0.
спрашивай если что не понял
в сессии (типа автозагрузки в Ubuntu)
2Kwahа как настраивать это "laptop-mode-tools",
Страница сгенерирована за 0.036 секунд. Запросов: 23.