Господа, подскажите пожалуйста, в какую сторону копать?
Сделал следущее:
sudo apt-get install proftpd-mysql
>/etc/proftpd/
содержание файла proftpd.conf
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 off
IdentLookups off
UseReverseDNS off
TimesGMT off
DefaultTransferMode ascii
AllowForeignAddress on
AllowRetrieveRestart on
AllowStoreRestart on
DeleteAbortedStores on
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
DefaultRoot /home/ftp/
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
MasqueradeAddress 192.168.0.160
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
AuthOrder *mod_auth_pam.c mod_auth_unix.c
AuthPAM on
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
# Choose a SQL backend among MySQL or PostgreSQL.
# Both modules are loaded in default configuration, so you have to specify the backend
# or comment out the unused module in /etc/proftpd/modules.conf.
# Use 'mysql' or 'postgres' as possible values.
#
<IfModule mod_sql.c>
SQLBackend mysql
</IfModule>
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
# A basic anonymous configuration, no upload directories.
<Anonymous /home/ftp/>
User proftpd
Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
RequireValidShell off
#
# # Limit the maximum number of anonymous logins
MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
DisplayLogin welcome.msg
DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
</Anonymous>
[center]Содержание файла sql.conf[/center]
[code]
#
# Proftpd sample configuration for SQL-based authentication.
#
# (This is not to be used if you prefer a PAM-based SQL authentication)
#
<IfModule mod_sql.c>
#
# Choose a SQL backend among MySQL or PostgreSQL.
# Both modules are loaded in default configuration, so you have to specify the backend
# or comment out the unused module in /etc/proftpd/modules.conf.
# Use 'mysql' or 'postgres' as possible values.
#
SQLBackend mysql
#
SQLEngine on
SQLAuthenticate on
#
# Use both a crypted or plaintext password
SQLAuthTypes Crypt Plaintext
#
# Use a backend-crypted or a crypted password
#SQLAuthTypes Backend Crypt
#
# Connection
SQLConnectInfo proftpd@localhost:3306 USER(который в мускуле) PASSWORD(который в мускуле)
#
# Describes both users/groups tables
#
SQLUserInfo users userid passwd uid gid homedir shell
SQLGroupInfo groups groupname gid members
#
</IfModule>
Содержание файла modules.conf
#
# This file is used to manage DSO modules and features.
#
# This is the directory where DSO modules reside
ModulePath /usr/lib/proftpd
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
LoadModule mod_ctrls_admin.c
LoadModule mod_tls.c
LoadModule mod_sql.c
LoadModule mod_ldap.c
#
# 'SQLBackend mysql' or 'SQLBackend postgres' directives are required
# to have SQL authorization working. You can also comment out the
# unused module here, in alternative.
#
LoadModule mod_sql_mysql.c
LoadModule mod_sql_postgres.c
LoadModule mod_radius.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
LoadModule mod_quotatab_ldap.c
LoadModule mod_quotatab_sql.c
LoadModule mod_quotatab_radius.c
LoadModule mod_wrap.c
LoadModule mod_rewrite.c
LoadModule mod_load.c
LoadModule mod_ban.c
LoadModule mod_wrap2.c
LoadModule mod_wrap2_file.c
LoadModule mod_wrap2_sql.c
# keep this module the last one
LoadModule mod_ifsession.c
LoadModule mod_auth_pam.c
После выполнения команды:
***@****:~$ sudo /etc/init.d/proftpd start
* Starting ftp server proftpd
- mod_dso/0.4: module 'mod_auth_pam.c' already loaded
- Fatal: LoadModule: error loading module 'mod_auth_pam.c': Operation not permitted on line 44 of '/etc/proftpd/modules.conf'
****@****:~$ cd /usr/lib/proftpd/
****@****:/usr/lib/proftpd$ ls
mod_ban.a mod_ifsession.la mod_quotatab_file.la mod_quotatab_sql.a mod_rewrite.la mod_sql_postgres.a mod_wrap2_file.so
mod_ban.la mod_ifsession.so mod_quotatab_file.so mod_quotatab_sql.la mod_rewrite.so mod_sql_postgres.la mod_wrap2.la
mod_ban.so mod_ldap.a mod_quotatab.la mod_quotatab_sql.so mod_site_misc.a mod_sql_postgres.so mod_wrap2.so
mod_ctrls_admin.a mod_ldap.la mod_quotatab_ldap.a mod_radius.a mod_site_misc.la mod_sql.so mod_wrap2_sql.a
mod_ctrls_admin.la mod_ldap.so mod_quotatab_ldap.la mod_radius.la mod_site_misc.so mod_tls.a mod_wrap2_sql.la
mod_ctrls_admin.so mod_load.a mod_quotatab_ldap.so mod_radius.so mod_sql.a mod_tls.la mod_wrap2_sql.so
mod_facl.a mod_load.la mod_quotatab_radius.a mod_ratio.a mod_sql.la mod_tls.so mod_wrap.a
mod_facl.la mod_load.so mod_quotatab_radius.la mod_ratio.la mod_sql_mysql.a mod_wrap2.a mod_wrap.la
mod_facl.so mod_quotatab.a mod_quotatab_radius.so mod_ratio.so mod_sql_mysql.la mod_wrap2_file.a mod_wrap.so
mod_ifsession.a mod_quotatab_file.a mod_quotatab.so mod_rewrite.a mod_sql_mysql.so mod_wrap2_file.la
Я если честно не понимаю, что он там "лоадед"...
Итог: LDEP (кажется так называется) авторизация работает всё тру. А вот через мускул - никак...
Я уже весь гугл изнасиловал, по нескольким версиям ставил этот профтпд, но мускул- никак не подключить.
Был помнится очень давно подробный МАН, как настроить этот proftpd, но его я чтото не нашёл.
П.С.: vsftpd не предлагайте
[/code]
Тема: proftpd + mysql (Прочитано 5159 раз)
