Попбробовал через сетку... и ничего...
Через команду hp-scan выдает на экран:
HP Linux Imaging and Printing System (ver. 2.8.9)
Scan Utility ver. 2.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: No destinations specified. Adding 'file' destination by default.
warning: File destination enabled with no output file specified.
Setting output format to JPEG for color/lineart mode.
warning: Defaulting to '/home/andrey/hpscan001.jpg'.
error: Unable to locate device hpaio:/net/HP_LaserJet_M1522nf_MFP?ip=169.254.83.86 using SANE backend hpaio:. Please check HPLIP installation.
И еще через команду sane-find-scanner выдает:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4c17 [HP LaserJet M1522nf MFP]) at libusb:001:004
found USB scanner (vendor=0x0db0, product=0x6877) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
Чего делать? Подскажите, плиз!