Форум русскоязычного сообщества Ubuntu


Считаете, что Ubuntu недостаточно дружелюбна к новичкам?
Помогите создать новое Руководство для новичков!

Автор Тема: Проблема с USB на мониторе HP w2207h  (Прочитано 4002 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Проблема с USB на мониторе HP w2207h
« : 23 Ноября 2008, 19:55:37 »
Не пашут оба USB на мониторе HP w2207h - модель монитора(обзор монитора: http://www.merlion.ru/goods/catalog/product/86403/ ) , проблема была и в винде, после сбоя в подаче электроэнергии. Дня 3 назад они заработали, но после установки Ubuntu 8.10 снова не пашут ни в винде, ни в линуксе, что тута не воткнуть  :'(

версия ядра:  Linux ambal-desktop 2.6.27-8-generic #1 SMP Thu Nov 6 17:33:54 UTC 2008 i686 GNU/Linux

вывод команды lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 06b9:4061 Alcatel Telecom SpeedTouch ISDN or ADSL Modem
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

вывод команды dmesg | tail: 
[   54.088509] lo: Disabled Privacy Extensions
[   54.091698] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.234922] NET: Registered protocol family 24
[   64.108044] nas0: no IPv6 routers present
[  152.584745] ppdev0: registered pardevice
[  152.632635] ppdev0: unregistered pardevice
[  153.764483] ppdev0: registered pardevice
[  153.842231] ppdev0: unregistered pardevice
[  155.335084] ppdev0: registered pardevice
[  155.384090] ppdev0: unregistered pardevice


Помогите, пожалуйста) А то, чтобы что-то воткнуть в простые юзб на кейсе мне нужно двигать стол со шкафом))

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #1 : 24 Ноября 2008, 13:51:27 »
up
Помогите кто-нибудь, пожалуйста!  :(

Оффлайн dmig

  • Старожил
  • *
  • Сообщений: 1668
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #2 : 24 Ноября 2008, 14:25:25 »
полный вывод dmesg покажи.
или отключи хаб монитора, затем воткни и сделай dmesg | tail

проблема 100% в железе. либо кривой хаб, либо кривой контроллер usb.
попробуй втыкать хаб в другие разъёмы

ЗЫ у меня стоит плата с доп. контроллером, так вот, если в него воткнуть девайсы во все 5 портов, он умирает (видимо не хвататет питания)

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #3 : 24 Ноября 2008, 14:48:47 »
вот полный вывод, не знаю почему в 1 раз неполный скопировал...
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-8-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 6 17:33:54 UTC 2008 (Ubuntu 2.6.27-8.17-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-d000
[    0.000000] RAMDISK: 1f810000 - 1ffdf964
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP 000F7620, 0014 (r0 IntelR)
[    0.000000] ACPI: RSDT 1FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1FFF30C0, 3EF5 (r1 INTELR AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: APIC 1FFF6FC0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fff0000
[    0.000000]   low ram: 00000000 - 1fff0000
[    0.000000]   bootmap 00002000 - 00006000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[    0.000000]   #4 [001f810000 - 001ffdf964]          RAMDISK ==> [001f810000 - 001ffdf964]
[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
[    0.000000] found SMP MP-table at [c00f5aa0] 000f5aa0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fff0
[    0.000000]   HighMem  0x0001fff0 -> 0x0001fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fff0
[    0.000000] On node 0 totalpages: 130959
[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 125844 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129807
[    0.000000] Kernel command line: root=UUID=44756a23-1a5d-48ad-993e-394061b9d906 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PMTIMER calibration value
[    0.000000] Detected 1817.886 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.004000] Memory: 505668k/524224k available (2572k kernel code, 18016k reserved, 1160k data, 424k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
[    0.004000]       .data : 0xc03832da - 0xc04a5680   (1160 kB)
[    0.004000]       .text : 0xc0100000 - 0xc03832da   (2572 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3635.77 BogoMIPS (lpj=7271544)
[    0.004060] Security Framework initialized
[    0.004072] SELinux:  Disabled at boot.
[    0.004112] AppArmor: AppArmor initialized
[    0.004135] Mount-cache hash table entries: 512
[    0.004521] Initializing cgroup subsys ns
[    0.004536] Initializing cgroup subsys cpuacct
[    0.004542] Initializing cgroup subsys memory
[    0.004579] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004587] CPU: L2 cache: 128K
[    0.004592] CPU: Hyper-Threading is disabled
[    0.004621] Checking 'hlt' instruction... OK.
[    0.020796] SMP alternatives: switching to UP code
[    0.032025] ACPI: Core revision 20080609
[    0.034844] ACPI: Checking initramfs for custom DSDT
[    0.592293] ENABLING IO-APIC IRQs
[    0.592497] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.632350] CPU0: Intel(R) Celeron(R) CPU 1.80GHz stepping 03
[    0.636031] Brought up 1 CPUs
[    0.636031] Total of 1 processors activated (3635.77 BogoMIPS).
[    0.636031] CPU0 attaching sched-domain:
[    0.636031]  domain 0: span 0 level CPU
[    0.636031]   groups: 0
[    0.636031] net_namespace: 840 bytes
[    0.636031] Booting paravirtualized kernel on bare hardware
[    0.636031] Time: 11:28:42  Date: 11/24/08
[    0.636031] NET: Registered protocol family 16
[    0.636031] EISA bus registered
[    0.636031] ACPI: bus type pci registered
[    0.663457] PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=2
[    0.663464] PCI: Using configuration type 1 for base access
[    0.668962] ACPI: EC: Look up EC in DSDT
[    0.679212] ACPI: Interpreter enabled
[    0.679223] ACPI: (supports S0 S1 S4 S5)
[    0.679257] ACPI: Using IOAPIC for interrupt routing
[    0.695658] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.695918] PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
[    0.696103] PCI: 0000:00:1d.0 reg 20 io port: [d800, d81f]
[    0.696173] PCI: 0000:00:1d.1 reg 20 io port: [d000, d01f]
[    0.696240] PCI: 0000:00:1d.2 reg 20 io port: [d400, d41f]
[    0.696309] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e2100000, e21003ff]
[    0.696372] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.696379] pci 0000:00:1d.7: PME# disabled
[    0.696430] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[    0.696433] * this clock source is slow. If you are sure your timer does not have
[    0.696435] * this bug, please use "acpi_pm_good" to disable the workaround
[    0.696488] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.696499] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[    0.696505] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[    0.696532] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[    0.696542] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[    0.696551] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[    0.696561] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[    0.696570] PCI: 0000:00:1f.1 reg 20 io port: [f000, f00f]
[    0.696580] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
[    0.696643] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[    0.696698] PCI: 0000:00:1f.5 reg 10 io port: [e000, e0ff]
[    0.696708] PCI: 0000:00:1f.5 reg 14 io port: [e400, e43f]
[    0.696717] PCI: 0000:00:1f.5 reg 18 32bit mmio: [e2101000, e21011ff]
[    0.696727] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [e2102000, e21020ff]
[    0.696762] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.696769] pci 0000:00:1f.5: PME# disabled
[    0.696816] PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e0ffffff]
[    0.696826] PCI: 0000:01:00.0 reg 14 32bit mmio: [d8000000, dfffffff]
[    0.696852] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[    0.696915] PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, e1ffffff]
[    0.696921] PCI: bridge 0000:00:01.0 32bit mmio pref: [d8000000, dfffffff]
[    0.696965] PCI: 0000:02:00.0 reg 10 32bit mmio: [e2000000, e200ffff]
[    0.696975] PCI: 0000:02:00.0 reg 14 io port: [c000, c007]
[    0.697020] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.697027] pci 0000:02:00.0: PME# disabled
[    0.697081] PCI: 0000:02:05.0 reg 10 io port: [c400, c4ff]
[    0.697093] PCI: 0000:02:05.0 reg 14 32bit mmio: [e2010000, e20100ff]
[    0.697142] pci 0000:02:05.0: supports D1
[    0.697145] pci 0000:02:05.0: supports D2
[    0.697149] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.697156] pci 0000:02:05.0: PME# disabled
[    0.697198] pci 0000:00:1e.0: transparent bridge
[    0.697204] PCI: bridge 0000:00:1e.0 io port: [c000, cfff]
[    0.697211] PCI: bridge 0000:00:1e.0 32bit mmio: [e2000000, e20fffff]
[    0.697232] bus 00 -> node 0
[    0.697260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.697760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.737410] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.737688] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.737956] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.738222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.738490] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.738760] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.739027] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.739295] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.739900] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.740140] pnp: PnP ACPI init
[    0.740168] ACPI: bus type pnp registered
[    0.750473] pnp: PnP ACPI: found 14 devices
[    0.750482] ACPI: ACPI bus type pnp unregistered
[    0.750490] PnPBIOS: Disabled by ACPI PNP
[    0.752289] PCI: Using ACPI for IRQ routing
[    0.752625] NET: Registered protocol family 8
[    0.752625] NET: Registered protocol family 20
[    0.752625] NetLabel: Initializing
[    0.752625] NetLabel:  domain hash size = 128
[    0.752625] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.752625] NetLabel:  unlabeled traffic allowed by default
[    0.753272] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.753278]    actual entries 65620
[    0.753616] AppArmor: AppArmor Filesystem Enabled
[    0.753654] ACPI: RTC can wake from S4
[    0.753715] system 00:01: ioport range 0x400-0x4bf could not be reserved
[    0.753715] system 00:02: ioport range 0xb78-0xb7b has been reserved
[    0.753715] system 00:02: ioport range 0xf78-0xf7b has been reserved
[    0.753715] system 00:02: ioport range 0xa78-0xa7b has been reserved
[    0.753715] system 00:02: ioport range 0xe78-0xe7b has been reserved
[    0.753715] system 00:02: ioport range 0xbbc-0xbbf has been reserved
[    0.753715] system 00:02: ioport range 0xfbc-0xfbf has been reserved
[    0.753715] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.753715] system 00:02: ioport range 0x294-0x297 has been reserved
[    0.753715] system 00:02: ioport range 0x4e0-0x4e7 has been reserved
[    0.791715] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.791721] pci 0000:00:01.0:   IO window: disabled
[    0.791730] pci 0000:00:01.0:   MEM window: 0xe0000000-0xe1ffffff
[    0.791737] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
[    0.791747] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.791753] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.791761] pci 0000:00:1e.0:   MEM window: 0xe2000000-0xe20fffff
[    0.791768] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.791795] pci 0000:00:1e.0: setting latency timer to 64
[    0.791802] bus: 00 index 0 io port: [0, ffff]
[    0.791806] bus: 00 index 1 mmio: [0, ffffffff]
[    0.791810] bus: 01 index 0 mmio: [0, 0]
[    0.791813] bus: 01 index 1 mmio: [e0000000, e1ffffff]
[    0.791817] bus: 01 index 2 mmio: [d8000000, dfffffff]
[    0.791820] bus: 01 index 3 mmio: [0, 0]
[    0.791824] bus: 02 index 0 io port: [c000, cfff]
[    0.791828] bus: 02 index 1 mmio: [e2000000, e20fffff]
[    0.791832] bus: 02 index 2 mmio: [0, 0]
[    0.791836] bus: 02 index 3 io port: [0, ffff]
[    0.791839] bus: 02 index 4 mmio: [0, ffffffff]
[    0.791865] NET: Registered protocol family 2
[    0.792205] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.792678] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.792802] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.793020] TCP: Hash tables configured (established 16384 bind 16384)
[    0.793028] TCP reno registered
[    0.793325] NET: Registered protocol family 1
[    0.793564] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[    1.340872]  it is
[    1.985402] Freeing initrd memory: 7998k freed
[    1.987955] audit: initializing netlink socket (disabled)
[    1.987992] type=2000 audit(1227526122.984:1): initialized
[    1.995262] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.004414] VFS: Disk quotas dquot_6.5.1
[    2.004745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.005130] msgmni has been set to 1003
[    2.005570] io scheduler noop registered
[    2.005577] io scheduler anticipatory registered
[    2.005581] io scheduler deadline registered
[    2.005626] io scheduler cfq registered (default)
[    2.005752] pci 0000:01:00.0: Boot video device
[    2.007173] isapnp: Scanning for PnP cards...
[    2.361131] isapnp: No Plug & Play device found
[    2.604918] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.605236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.605847] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.608605] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.609901] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.618412] brd: module loaded
[    2.618673] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.619162] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.621779] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.621802] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.623531] mice: PS/2 mouse device common for all mice
[    2.624298] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.624345] rtc0: alarms up to one month
[    2.624942] EISA: Probing bus 0 at eisa.0
[    2.624991] EISA: Detected 0 cards.
[    2.624997] cpuidle: using governor ladder
[    2.625001] cpuidle: using governor menu
[    2.626120] TCP cubic registered
[    2.626208] Using IPI No-Shortcut mode
[    2.627562] registered taskstats version 1
[    2.627802]   Magic number: 0:925:479
[    2.628041] rtc_cmos 00:04: setting system clock to 2008-11-24 11:28:44 UTC (1227526124)
[    2.628049] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.628052] EDD information not available.
[    2.628681] Freeing unused kernel memory: 424k freed
[    2.628789] Write protecting the kernel text: 2576k
[    2.628845] Write protecting the kernel read-only data: 936k
[    2.647872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.002267] fuse init (API version 7.9)
[    3.250732] fan PNP0C0B:00: registered as cooling_device0
[    3.250754] ACPI: Fan [FAN] (on)
[    3.324656] processor ACPI0007:00: registered as cooling_device1
[    3.363342] thermal LNXTHERM:01: registered as thermal_zone0
[    3.394025] ACPI: Thermal Zone [THRM] (45 C)
[    4.819316] usbcore: registered new interface driver usbfs
[    4.819371] usbcore: registered new interface driver hub
[    4.819537] usbcore: registered new device driver usb
[    4.847743] No dock devices found.
[    4.858558] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    4.858583] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.858590] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.858726] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    4.862652] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    4.862681] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2100000
[    4.884108] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.884476] usb usb1: configuration #1 chosen from 1 choice
[    4.884547] hub 1-0:1.0: USB hub found
[    4.884575] hub 1-0:1.0: 6 ports detected
[    4.884751] USB Universal Host Controller Interface driver v3.0
[    5.035292] SCSI subsystem initialized
[    5.047337] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    5.047348] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[    5.092841] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.092861] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.092868] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.092950] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.093001] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[    5.093404] usb usb2: configuration #1 chosen from 1 choice
[    5.093480] hub 2-0:1.0: USB hub found
[    5.093505] hub 2-0:1.0: 2 ports detected
[    5.115940] libata version 3.00 loaded.
[    5.300793] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.300812] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.300819] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.300901] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.300953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    5.301348] usb usb3: configuration #1 chosen from 1 choice
[    5.301423] hub 3-0:1.0: USB hub found
[    5.301448] hub 3-0:1.0: 2 ports detected
[    5.404789] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.404811] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.404818] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.404903] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.404958] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    5.405351] usb usb4: configuration #1 chosen from 1 choice
[    5.405430] hub 4-0:1.0: USB hub found
[    5.405456] hub 4-0:1.0: 2 ports detected
[    5.412090] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    5.509697] via-rhine 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.518272] eth0: VIA Rhine III at 0xe2010000, 00:04:61:63:a6:da, IRQ 22.
[    5.518981] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[    5.528538] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.528632] pata_acpi 0000:00:1f.1: setting latency timer to 64
[    5.528662] pata_acpi 0000:00:1f.1: PCI INT A disabled
[    5.545798] ata_piix 0000:00:1f.1: version 2.12
[    5.545826] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.545912] ata_piix 0000:00:1f.1: setting latency timer to 64
[    5.548289] scsi0 : ata_piix
[    5.548583] scsi1 : ata_piix
[    5.550035] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    5.550043] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    5.610354] usb 2-2: configuration #1 chosen from 1 choice
[    6.075431] ata2.00: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[    6.075439] ata2.00: 488397168 sectors, multi 0: LBA48
[    6.075478] ata2.01: ATAPI: LITE-ON DVDRW LH-16W1P, SL05, max UDMA/66
[    6.075500] ata2.00: limited to UDMA/33 due to 40-wire cable
[    6.075505] ata2.01: limited to UDMA/33 due to 40-wire cable
[    6.080566] ata2.00: configured for UDMA/33
[    6.112357] ata2.01: configured for UDMA/33
[    6.112660] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5
[    6.114125] scsi 1:0:1:0: CD-ROM            LITE-ON  DVDRW LH-16W1P   SL05 PQ: 0 ANSI: 5
[    6.801816] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[    6.802063] scsi 1:0:1:0: Attached scsi generic sg1 type 5
[    6.904921] Driver 'sd' needs updating - please use bus_type methods
[    6.906087] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.906172] sd 1:0:0:0: [sda] Write Protect is off
[    6.906179] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.906315] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.906579] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.906660] sd 1:0:0:0: [sda] Write Protect is off
[    6.906668] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.906806] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.906821]  sda: sda1 sda2 < sda5<4>Driver 'sr' needs updating - please use bus_type methods
[    6.945614]  sda6 sda7 >
[    6.952996] sd 1:0:0:0: [sda] Attached SCSI disk
[    6.967774] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    6.967784] Uniform CD-ROM driver Revision: 3.20
[    6.967998] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    7.429743] PM: Starting manual resume from disk
[    7.429758] PM: Resume from partition 8:7
[    7.429761] PM: Checking hibernation image.
[    7.430140] PM: Resume from disk failed.
[    7.535083] kjournald starting.  Commit interval 5 seconds
[    7.535121] EXT3-fs: mounted filesystem with ordered data mode.
[   13.617323] udevd version 124 started
[   14.922778] Linux agpgart interface v0.103
[   14.996442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.075712] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[   15.085094] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[   15.147859] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.212832] iTCO_vendor_support: vendor-support=0
[   15.268682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   15.269866] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
[   15.270253] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.447502] intel_rng: FWH not detected
[   15.583159] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   15.592095] ACPI: Power Button (FF) [PWRF]
[   15.592367] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   15.608071] ACPI: Power Button (CM) [PWRB]
[   15.892976] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   16.998559] nvidia: module license 'NVIDIA' taints kernel.
[   17.688523] parport_pc 00:0a: reported by Plug and Play ACPI
[   17.688590] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   19.538997] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.539753] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.09  Mon Oct 27 14:23:30 PST 2008
[   19.610750] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[   19.652143] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[   19.711743] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   19.711786] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   19.852164] firmware: requesting speedtch-1.bin.0.00
[   19.852439] usbcore: registered new interface driver speedtch
[   20.032080] intel8x0_measure_ac97_clock: measured 54393 usecs
[   20.032087] intel8x0: clocking to 48000
[   23.356756] firmware: requesting speedtch-1.bin.0
[   23.460854] speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin.0
[   23.460864] firmware: requesting speedtch-2.bin.0.00
[   23.467480] firmware: requesting speedtch-2.bin.0
[   23.939087] speedtch 2-2:1.0: found stage 2 firmware speedtch-2.bin.0
[   24.942230] lp0: using parport0 (interrupt-driven).
[   25.266838] Adding 497972k swap on /dev/sda7.  Priority:-1 extents:1 across:497972k
[   25.904247] EXT3 FS on sda6, internal journal
[   27.450209] type=1505 audit(1227508149.075:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3911
[   27.784439] type=1505 audit(1227508149.411:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3916
[   27.785042] type=1505 audit(1227508149.411:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3916
[   28.007796] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.630340] ATM dev 0: ADSL line is synchronising
[   29.014029] ACPI: WMI: Mapper loaded
[   31.089931] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   31.224629] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   31.224652] apm: overridden by ACPI.
[   31.468256] ppdev: user-space parallel port driver
[   34.280207] Bluetooth: Core ver 2.13
[   34.284977] NET: Registered protocol family 31
[   34.284997] Bluetooth: HCI device and connection manager initialized
[   34.285005] Bluetooth: HCI socket layer initialized
[   34.321415] Bluetooth: L2CAP ver 2.11
[   34.321435] Bluetooth: L2CAP socket layer initialized
[   34.371073] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.371094] Bluetooth: BNEP filters: protocol multicast
[   34.419665] Bridge firewalling registered
[   34.434581] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   34.449373] Bluetooth: RFCOMM socket layer initialized
[   34.459560] Bluetooth: RFCOMM TTY layer initialized
[   34.459584] Bluetooth: RFCOMM ver 1.10
[   34.475598] Bluetooth: SCO (Voice Link) ver 0.6
[   34.475622] Bluetooth: SCO socket layer initialized
[   37.400487] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   37.400540] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   37.400585] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[   38.681749] eth0: link down
[   42.608061] ATM dev 0: DSL line goes up
[   42.614087] ATM dev 0: ADSL line is up (288 kb/s down | 160 kb/s up)
[   51.154417] PPP generic driver version 2.4.2
[   51.195423] NET: Registered protocol family 17
[   51.280360] NET: Registered protocol family 10
[   51.284592] lo: Disabled Privacy Extensions
[   51.287879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.425610] NET: Registered protocol family 24
[   62.228015] nas0: no IPv6 routers present
[  168.612612] ppdev0: registered pardevice
[  168.654570] ppdev0: unregistered pardevice
[  169.871475] ppdev0: registered pardevice
[  169.912826] ppdev0: unregistered pardevice
[  171.244228] ppdev0: registered pardevice
[  171.296061] ppdev0: unregistered pardevice

Оффлайн dmig

  • Старожил
  • *
  • Сообщений: 1668
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #4 : 24 Ноября 2008, 14:58:59 »
хаб есть, успешно прицеплен.
[    5.405351] usb usb4: configuration #1 chosen from 1 choice
[    5.405430] hub 4-0:1.0: USB hub found
[    5.405456] hub 4-0:1.0: 2 ports detected
[    5.412090] usb 2-2: new full speed USB device using uhci_hcd and address 2

ну ка выложи вывод dmesg | tail после втыкания в хаб устройства

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #5 : 24 Ноября 2008, 15:01:58 »
вот:
[   51.284592] lo: Disabled Privacy Extensions
[   51.287879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.425610] NET: Registered protocol family 24
[   62.228015] nas0: no IPv6 routers present
[  168.612612] ppdev0: registered pardevice
[  168.654570] ppdev0: unregistered pardevice
[  169.871475] ppdev0: registered pardevice
[  169.912826] ppdev0: unregistered pardevice
[  171.244228] ppdev0: registered pardevice
[  171.296061] ppdev0: unregistered pardevice

Оффлайн dmig

  • Старожил
  • *
  • Сообщений: 1668
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #6 : 24 Ноября 2008, 15:06:19 »
вот:
[   51.284592] lo: Disabled Privacy Extensions
[   51.287879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.425610] NET: Registered protocol family 24
[   62.228015] nas0: no IPv6 routers present
[  168.612612] ppdev0: registered pardevice
[  168.654570] ppdev0: unregistered pardevice
[  169.871475] ppdev0: registered pardevice
[  169.912826] ppdev0: unregistered pardevice
[  171.244228] ppdev0: registered pardevice
[  171.296061] ppdev0: unregistered pardevice


это сразу после втыкания устройства в хаб? поэкспериментируй с перетыканием хаба в другие порты, что-то тут точно дохлое.

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #7 : 24 Ноября 2008, 15:33:40 »
вот, высунул хаб:
[   51.284592] lo: Disabled Privacy Extensions
[   51.287879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.425610] NET: Registered protocol family 24
[   62.228015] nas0: no IPv6 routers present
[  168.612612] ppdev0: registered pardevice
[  168.654570] ppdev0: unregistered pardevice
[  169.871475] ppdev0: registered pardevice
[  169.912826] ppdev0: unregistered pardevice
[  171.244228] ppdev0: registered pardevice
[  171.296061] ppdev0: unregistered pardevice
засунул снова:
[   51.284592] lo: Disabled Privacy Extensions
[   51.287879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.425610] NET: Registered protocol family 24
[   62.228015] nas0: no IPv6 routers present
[  168.612612] ppdev0: registered pardevice
[  168.654570] ppdev0: unregistered pardevice
[  169.871475] ppdev0: registered pardevice
[  169.912826] ppdev0: unregistered pardevice
[  171.244228] ppdev0: registered pardevice
[  171.296061] ppdev0: unregistered pardevice
опять высунул и засунул в другую дырку))) вместо модема:
[20782.928205] usb 1-1.2: device descriptor read/64, error -32
[20783.104184] usb 1-1.2: device descriptor read/64, error -32
[20783.287187] usb 1-1.2: new full speed USB device using ehci_hcd and address 5
[20783.383444] usb 1-1.2: device descriptor read/64, error -32
[20783.556253] usb 1-1.2: device descriptor read/64, error -32
[20783.733103] usb 1-1.2: new full speed USB device using ehci_hcd and address 6
[20784.140241] usb 1-1.2: device not accepting address 6, error -32
[20784.229891] usb 1-1.2: new full speed USB device using ehci_hcd and address 7
[20784.640044] usb 1-1.2: device not accepting address 7, error -32
[20784.642574] hub 1-1:1.0: unable to enumerate USB device on port 2
воткнул модем, перезагрузился и лампочка на флешке загорелась, вероятно заработало, как теперь её тут открыть?) Убунтой пользуюсь дня 4, так что сорри за тупость)

Оффлайн dmig

  • Старожил
  • *
  • Сообщений: 1668
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #8 : 24 Ноября 2008, 16:31:20 »
что в логах после загорания лампочки на флэшке?

похоже на https://bugs.launchpad.net/ubuntu/+source/linux/+bug/256767
но раз проблема была и в винде, скорее всего хаб мёртвый или близок к тому. стоит проверить его на другой машине.

Оффлайн fwhr

  • Старожил
  • *
  • Сообщений: 2104
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #9 : 24 Ноября 2008, 16:45:38 »
Или с другим проводом, потолще и покачественней...
Обычно люди получают не то, что заслуживают, а то, что получилось... © Доктор Хауз

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #10 : 24 Ноября 2008, 16:50:08 »
после загорания лампочки на флешке:
[  146.724081] usb 1-1.2: device not accepting address 15, error -32
[  146.724789] hub 1-1:1.0: unable to enumerate USB device on port 2
[  146.732065] ppdev0: registered pardevice
[  146.780543] ppdev0: unregistered pardevice
[  147.922019] ppdev0: registered pardevice
[  147.972814] ppdev0: unregistered pardevice
[  149.289127] ppdev0: registered pardevice
[  149.336074] ppdev0: unregistered pardevice
[ 2358.858399] NVRM: Xid (0001:00): 9, Channel 00000003 Instance 0000268d status 0000001d
[ 3163.837335] NVRM: Xid (0001:00): 9, Channel 00000003 Instance 0000268d status 0000001d
что мне делать?((

Оффлайн axe

  • Старожил
  • *
  • Сообщений: 1203
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #11 : 24 Ноября 2008, 20:46:51 »
[20782.928205] usb 1-1.2: device descriptor read/64, error -32
[20783.104184] usb 1-1.2: device descriptor read/64, error -32
[20783.287187] usb 1-1.2: new full speed USB device using ehci_hcd and address 5
[20783.383444] usb 1-1.2: device descriptor read/64, error -32
[20783.556253] usb 1-1.2: device descriptor read/64, error -32
[20783.733103] usb 1-1.2: new full speed USB device using ehci_hcd and address 6
[20784.140241] usb 1-1.2: device not accepting address 6, error -32
[20784.229891] usb 1-1.2: new full speed USB device using ehci_hcd and address 7
[20784.640044] usb 1-1.2: device not accepting address 7, error -32
[20784.642574] hub 1-1:1.0: unable to enumerate USB device on port 2

знакомые логи... попробуй сделать
sudo modprobe -r ehci_hcdи воткни заново в тот же разъем. Другой разъем вообще неживой какой-то, похоже...

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #12 : 24 Ноября 2008, 21:01:18 »
Сделал, но... в общем результата никакого, разве что теперь лампочка не горит вообще на флешке... Хотя нет, после перезагрузки горит лампочка теперь, но нигде флешку я всё-равно не вижу...( что делать? Помогите, люди добрые)
« Последнее редактирование: 25 Ноября 2008, 01:18:52 от ambal_ »

Оффлайн ambal_

  • Автор темы
  • Новичок
  • *
  • Сообщений: 49
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #13 : 25 Ноября 2008, 08:12:59 »
up
Помогите кто-нибудь, плззз)

Оффлайн dmig

  • Старожил
  • *
  • Сообщений: 1668
    • Просмотр профиля
Re: Проблема с USB на мониторе HP w2207h
« Ответ #14 : 25 Ноября 2008, 08:35:24 »
ambal_ хватит ныть! не маленький уже.
я же сказал, попробуй этот хаб на другом компе -- у меня есть подозрение, что он дохлый.

 

Страница сгенерирована за 0.051 секунд. Запросов: 23.