Suspend (sleep) не работает корректно

[Bock]

Собственно как и hibernate.
Такое чувство, что засыпает хорошо, но мгновенно просыпается...

(Нажмите, чтобы показать/скрыть)

[  932.300986] PM: Syncing filesystems ... done.
[  932.304561] PM: Preparing system for mem sleep
[  932.304564] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  932.309043] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  932.324977] PM: Entering mem sleep
[  932.324991] Suspending console(s) (use no_console_suspend to debug)
[  932.868041] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[  932.868243] sd 3:0:0:0: [sdb] Stopping disk
[  933.332716] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  933.332873] sd 2:0:0:0: [sda] Stopping disk
[  933.818877] ACPI handle has no context!
[  933.819112] parport_pc 00:0a: disabled
[  933.819323] serial 00:09: disabled
[  933.819368] NVRM: RmPowerManagement: 4
[  933.866389] ACPI handle has no context!
[  933.880139] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[  933.880141] forcedeth 0000:00:0a.0: PME# disabled
[  933.896053] sata_nv 0000:00:08.0: PCI INT A disabled
[  933.912034] sata_nv 0000:00:07.0: PCI INT A disabled
[  933.944022] ehci_hcd 0000:00:02.1: PCI INT B disabled
[  933.960019] ohci_hcd 0000:00:02.0: PCI INT A disabled
[  933.976008] ohci_hcd 0000:00:02.0: PME# enabled
[  933.976015] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
[  933.976017] ohci_hcd 0000:00:02.0: PME# enabled
[  933.976018] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
[  933.976083] PM: suspend devices took 1.656 seconds
[  933.976141] ACPI: Preparing to enter system sleep state S3
[  934.081707] Disabling non-boot CPUs ...
[  934.184008] CPU 1 is now offline
[  934.184009] SMP alternatives: switching to UP code
[  934.301467] CPU0 attaching NULL sched-domain.
[  934.301469] CPU1 attaching NULL sched-domain.
[  934.308304] CPU0 attaching NULL sched-domain.
[  934.308477] CPU1 is down
[  934.308546] Extended CMOS year: 2000
[  934.308546] Back to C!
[  934.308546] PCI-DMA: Resuming GART IOMMU
[  934.308546] PCI-DMA: Restoring GART aperture settings
[  934.308546] Extended CMOS year: 2000
[  934.308546] pcieport-driver 0000:00:0b.0: Linking AER extended capability
[  934.308546] pcieport-driver 0000:00:0c.0: Linking AER extended capability
[  934.308546] pcieport-driver 0000:00:0d.0: Linking AER extended capability
[  934.308546] pcieport-driver 0000:00:0e.0: Linking AER extended capability
[  934.308546] Enabling non-boot CPUs ...
[  934.308546] SMP alternatives: switching to SMP code
[  934.451101] Booting processor 1 APIC 0x1 ip 0x6000
[  934.301327] Initializing CPU#1
[  934.301327] Calibrating delay using timer specific routine.. 5428.05 BogoMIPS (lpj=10856106)
[  934.301327] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[  934.301327] CPU: L2 Cache: 512K (64 bytes/line)
[  934.301327] CPU: Physical Processor ID: 0
[  934.301327] CPU: Processor Core ID: 1
[  934.540116] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[  934.540157] CPU0 attaching NULL sched-domain.
[  934.541014] Switched to high resolution mode on CPU 1
[  934.556875] CPU0 attaching sched-domain:
[  934.556878]  domain 0: span 0-1 level CPU
[  934.556879]   groups: 0 1
[  934.556883] CPU1 attaching sched-domain:
[  934.556884]  domain 0: span 0-1 level CPU
[  934.556885]   groups: 1 0
[  934.561011] CPU1 is up
[  934.561013] ACPI: Waking up from system sleep state S3
[  934.561430] ACPI: Unable to turn cooling device [ffff88012f837300] 'off'
[  934.561441] pci 0000:00:00.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[  934.561472] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[  934.561474] ohci_hcd 0000:00:02.0: PME# disabled
[  934.561475] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[  934.561477] ohci_hcd 0000:00:02.0: PME# disabled
[  934.576012] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[  934.576015] ohci_hcd 0000:00:02.0: setting latency timer to 64
[  934.593996] usb usb2: root hub lost power or was reset
[  934.608009] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[  934.608011] ehci_hcd 0000:00:02.1: setting latency timer to 64
[  934.624017] pata_amd 0000:00:06.0: setting latency timer to 64
[  934.640013] sata_nv 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[  934.640019] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[  934.640021] sata_nv 0000:00:07.0: setting latency timer to 64
[  934.656013] sata_nv 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[  934.656020] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[  934.656022] sata_nv 0000:00:08.0: setting latency timer to 64
[  934.656032] pci 0000:00:09.0: restoring config space at offset 0x7 (was 0x2280a0a0, writing 0xa280a0a0)
[  934.656037] pci 0000:00:09.0: setting latency timer to 64
[  934.672010] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010103)
[  934.672015] forcedeth 0000:00:0a.0: restoring config space at offset 0x5 (was 0x1, writing 0xbc01)
[  934.672017] forcedeth 0000:00:0a.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe02a000)
[  934.672020] forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
[  934.672024] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[  934.672026] forcedeth 0000:00:0a.0: PME# disabled
[  934.672058] pcieport-driver 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
[  934.672068] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[  934.672079] pcieport-driver 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
[  934.672088] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[  934.672098] pcieport-driver 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
[  934.672106] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[  934.672116] pcieport-driver 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  934.672125] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[  934.740616] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[1024]  IR/IT contexts=[4/8]
[  934.747600] CA0106 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[  934.747640] NVRM: RmPowerManagement: 5
[  935.309509] serial 00:09: activated
[  935.310244] parport_pc 00:0a: activated
[  935.310309] sd 2:0:0:0: [sda] Starting disk
[  935.368013] ata1: SATA link down (SStatus 0 SControl 300)
[  935.524013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  935.532095] ata2.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[  935.548099] ata2.00: configured for UDMA/66
[  937.332014] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  937.340089] ata3.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[  937.340091] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  937.365260] ata3.00: configured for UDMA/133
[  937.371639] sd 3:0:0:0: [sdb] Starting disk
[  937.371642] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[  937.371656] sd 2:0:0:0: [sda] Write Protect is off
[  937.371657] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  937.371675] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  937.944013] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  937.952089] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[  937.952091] ata4.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[  938.000416] ata4.00: configured for UDMA/133
[  938.005789] sd 3:0:0:0: [sdb] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
[  938.005800] sd 3:0:0:0: [sdb] Write Protect is off
[  938.005801] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  938.005817] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  938.672012] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[  939.128008] usb 2-1: reset low speed USB device using ohci_hcd and address 2
[  939.664010] usb 2-7: reset full speed USB device using ohci_hcd and address 3
[  939.883976] snd-usb-audio 2-7:1.0: no reset_resume for driver snd-usb-audio?
[  939.883977] snd-usb-audio 2-7:1.1: no reset_resume for driver snd-usb-audio?
[  939.883978] snd-usb-audio 2-7:1.2: no reset_resume for driver snd-usb-audio?
[  940.178347] PM: resume devices took 5.616 seconds
[  940.178353] ------------[ cut here ]------------
[  940.178354] WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
[  940.178356] Component: resume devices
[  940.178356] Modules linked in: ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt binfmt_misc bridge stp bnep video output input_polldev lp snd_usb_audio snd_usb_lib snd_hwdep snd_ca0106 snd_seq_dummy snd_seq_oss snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_seq_midi snd_pcm ac97_bus snd_rawmidi snd_seq_midi_event ppdev k8temp pcspkr snd_page_alloc nvidia(P) snd_seq snd_timer snd_seq_device parport_pc parport snd soundcore i2c_nforce2 hid_a4tech usbhid usb_storage ohci1394 ieee1394 forcedeth floppy vesafb fbcon tileblit font bitblit softcursor
[  940.178378] Pid: 11877, comm: pm-suspend Tainted: P        W  2.6.28-11-generic #42-Ubuntu
[  940.178380] Call Trace:
[  940.178385]  [<ffffffff80250927>] warn_slowpath+0xb7/0xf0
[  940.178388]  [<ffffffff8026d478>] ? down_trylock+0x38/0x50
[  940.178390]  [<ffffffff80251040>] ? try_acquire_console_sem+0x10/0x40
[  940.178393]  [<ffffffff8025c676>] ? lock_timer_base+0x36/0x70
[  940.178397]  [<ffffffff8069bf36>] ? printk+0x67/0x69
[  940.178399]  [<ffffffff80418877>] ? kobject_put+0x27/0x60
[  940.178403]  [<ffffffff804b6045>] ? put_device+0x15/0x20
[  940.178406]  [<ffffffff804be06a>] ? dpm_complete+0x18a/0x1a0
[  940.178408]  [<ffffffff8028003c>] suspend_test_finish+0x7c/0x80
[  940.178410]  [<ffffffff80280124>] suspend_devices_and_enter+0xe4/0x180
[  940.178412]  [<ffffffff802803d9>] enter_state+0xe9/0x120
[  940.178414]  [<ffffffff802804ca>] state_store+0xba/0x100
[  940.178416]  [<ffffffff80418717>] kobj_attr_store+0x17/0x20
[  940.178418]  [<ffffffff80347675>] sysfs_write_file+0xc5/0x140
[  940.178421]  [<ffffffff802e7eeb>] vfs_write+0xcb/0x130
[  940.178423]  [<ffffffff802e8040>] sys_write+0x50/0x90
[  940.178426]  [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[  940.178427] ---[ end trace 30238e306ce27c40 ]---
[  940.178458] PM: Finishing wakeup.
[  940.178459] Restarting tasks ... <3>hub 1-0:1.0: over-current change on port 5
[  940.197101] done.

Пробовал так же http://en.opensuse.org/S2ram - но он мало помог. Т.е. эффект тот же. Куда идти жаловаться? А то sleep очень не хватает.
Ещё и звук перестаёт работать. Звуковуха - Sblive 24 bit.

[ArcFi]

Железо?

[Bock]

Железо?

motherboard: ASUS M2N-E SLI
cpu: athlon 5200+
ram: 2x2 gb patriot
video: Gigabyte 8600 GT passive
hard: wd 500AAKS, 640AALS
Multimedia audio controller: Creative Labs CA0106 Soundblaster

Код: [Выделить]

lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev c0)
01:06.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
05:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev a1)

Ещё по сравнению с 8.10 перестал работать cpufreq - частоту не меняет и всегда показывает 2.7 Ггц (хотя в 8.10 менялось до 1 Ггц)
Пользователь решил продолжить мысль 01 Мая 2009, 14:55:38:

Код: [Выделить]

sudo /etc/acpi/sleep.sh sleep
Ignoring unknown interface eth0=eth0.
ppp0: ERROR while getting interface flags: No such device
 * Shutting down ALSA...                                                                                                           [ OK ]
ifup: interface lo already configured
Ignoring unknown interface eth0=eth0.
 * Setting up ALSA...                                                                                                              [ OK ]
FATAL: Module button not found.
FATAL: Module button not found.
FATAL: Module fan not found.
FATAL: Module thermal not found.
FATAL: Module fan not found.
FATAL: Module thermal not found.
/etc/acpi/resume.d/72-acpi-pain.sh: line 22: echo: памылка запісу: No such device
/etc/acpi/resume.d/72-acpi-pain.sh: line 23: echo: памылка запісу: No such device
FATAL: Module acpi_sbs not found.
FATAL: Module ac not found.
FATAL: Module ac not found.
FATAL: Module battery not found.
FATAL: Module battery not found.
FATAL: Module acpi_sbs not found.

тоже не помогает.

(Нажмите, чтобы показать/скрыть)

cat /var/log/pm-suspend.log
Initial commandline parameters:
Пят Тра  1 14:38:47 EEST 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/000record suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-vbe-post
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux wax 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64 GNU/Linux
Module                  Size  Used by
ppp_deflate            13568  0
zlib_deflate           30616  1 ppp_deflate
bsd_comp               14208  0
ppp_async              18560  1
crc_ccitt              10496  1 ppp_async
binfmt_misc            18572  1
bridge                 63904  0
stp                    11140  1 bridge
bnep                   22912  2
video                  29204  0
output                 11648  1 video
input_polldev          12688  0
lp                     19588  0
snd_usb_audio         108832  1
snd_usb_lib            27392  1 snd_usb_audio
snd_ca0106             46368  2
snd_hwdep              16776  1 snd_usb_audio
snd_ac97_codec        133848  1 snd_ca0106
snd_pcm_oss            52352  0
snd_seq_dummy          11524  0
snd_mixer_oss          24960  1 snd_pcm_oss
snd_seq_oss            41984  0
k8temp                 13440  0
ppdev                  16904  0
snd_pcm                99336  4 snd_usb_audio,snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_seq_midi           15744  0
pcspkr                 11136  0
nvidia               8123768  36
ac97_bus               10368  1 snd_ac97_codec
snd_page_alloc         18704  2 snd_ca0106,snd_pcm
snd_rawmidi            33920  3 snd_usb_lib,snd_ca0106,snd_seq_midi
snd_seq_midi_event     16512  2 snd_seq_oss,snd_seq_midi
snd_seq                66272  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              34064  2 snd_pcm,snd_seq
snd_seq_device         16276  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport_pc             45096  1
parport                49584  3 lp,ppdev,parport_pc
snd                    78792  18 snd_usb_audio,snd_ca0106,snd_hwdep,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              16800  1 snd
i2c_nforce2            16136  0
hid_a4tech             11392  0
usbhid                 47040  0
usb_storage            94912  0
ohci1394               42036  0
ieee1394              108288  1 ohci1394
forcedeth              68368  0
floppy                 75816  0
vesafb                 15240  1
fbcon                  49792  72
tileblit               11264  1 fbcon
font                   17024  1 fbcon
bitblit                14464  1 fbcon
softcursor             10368  1 bitblit
             total       used       free     shared    buffers     cached
Mem:       3993164    1297332    2695832          0      62784     373372
-/+ buffers/cache:     861176    3131988
Swap:       971892          0     971892
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
/usr/lib/pm-utils/sleep.d/45iwlist suspend suspend: /sbin/iwlist
not applicable.
/usr/lib/pm-utils/sleep.d/48hid2hci suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/96laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/etc/pm/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
/etc/pm/sleep.d/action_wpa suspend suspend: success.
Пят Тра  1 14:38:49 EEST 2009: performing suspend
Пят Тра  1 14:39:01 EEST 2009: Awake.
Пят Тра  1 14:39:01 EEST 2009: Running hooks for resume
/etc/pm/sleep.d/action_wpa resume suspend: success.
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/etc/pm/sleep.d/99laptop-mode resume suspend: Laptop mode disabled, not active
success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/96laptop-mode resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: /usr/lib/pm-utils/sleep.d/95hdparm-apm: 50: get_power_status: not found
success.
/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90chvt resume suspend: success.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/48hid2hci resume suspend: No devices in HID mode found
Returned exit code 1.
/usr/lib/pm-utils/sleep.d/45iwlist resume suspend: /sbin/iwlist
success.
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
/usr/lib/pm-utils/sleep.d/000record resume suspend: success.

Пользователь решил продолжить мысль 01 Мая 2009, 16:06:23:https://bugs.launchpad.net/ubuntu/+source/linux/+bug/368090 - такой же баг. Будем ждать решения. Ибо явно тут так просто не решить.
Может ядро обновят?