Ubuntu не хочет записывать на болванку образ DVD.

[Antrix]

Собственно сабж. Ubuntu напрочь отказывается записывать DVD (ISO) образ на болванку. Разновидности программ для записи значения не имеют (пробовал brasero, nero linux, k3b, gnome baker, консольная утилита cdrecord).

Вот логи из brasero:

(Нажмите, чтобы показать/скрыть)

Checking session consistency (brasero_burn_check_session_consistency burn.c:1905)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_1INV0U.bin toc = none
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI called brasero_job_get_input_type
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_AUWV0U.bin toc = none
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack called brasero_job_get_input_type
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_set_output_size_for_current_track
BraseroChecksumImage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_session_output_size
BraseroChecksumImage output set (IMAGE) image = /tmp/brasero_tmp_H2XV0U.bin toc = none
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_input_type
BraseroChecksumImage called brasero_job_set_current_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage Starting checksuming file /home/antrix/Torrent/debian-503-i386-DVD-1.iso (size = 378257408)
BraseroChecksumImage called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage Setting new checksum (type = 2) 7ea66fee666fa444f0256ab3c1ec6ba4 ( before)
BraseroChecksumImage Finished track successfully
BraseroChecksumImage stopping
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_current_track
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
   wodim
   -v
   dev=/dev/sr0
   speed=4
   driveropts=burnfree
   -dao
   fs=16m
   -data
   -nopad
   /home/antrix/Torrent/debian-503-i386-DVD-1.iso
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.9
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   :
BraseroWodim stdout: Vendor_info    : 'ASUS    '
BraseroWodim stdout: Identification : 'DRW-1814BLT     '
BraseroWodim stdout: Revision       : '1.04'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording)
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording)
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL)
BraseroWodim stdout: Profile: 0x001B (DVD+R)
BraseroWodim stdout: Profile: 0x001A (DVD+RW)
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording)
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite)
BraseroWodim stdout: Profile: 0x0012 (DVD-RAM)
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current)
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM)
BraseroWodim stdout: Profile: 0x000A (CD-RW)
BraseroWodim stdout: Profile: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM)
BraseroWodim stdout: Profile: 0x0002 (Removable disk)
BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
BraseroWodim stdout: Driver flags   : SWABAUDIO BURNFREE
BraseroWodim stdout: Supported modes: PACKET SAO
BraseroWodim stdout: Drive buf size : 950272 = 928 KB
BraseroWodim stdout: FIFO size      : 16777216 = 16384 KB
BraseroWodim stderr: Speed set to 5540 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data  4456 MB        
BraseroWodim stdout: Total size:     5118 MB (507:04.64) = 2281848 sectors
BraseroWodim stdout: Lout start:     5118 MB (507:06/48) = 2281848 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
BraseroWodim stdout: Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 16648
BraseroWodim stdout: Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting real write in    4 seconds.
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    3 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    2 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    1 seconds.   0 seconds. Operation starts.
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Performing OPC...
BraseroWodim stderr: Errno: 5 (Input/output error), send opc scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  54 01 00 00 00 00 00 00 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Writing  time:   22.760s
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x3 Medium Error, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 22.729s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: OPC failed.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo had 255 puts and 0 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: HUP
BraseroWodim stderr: HUP
BraseroWodim process finished with status 255
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
   error      = 0
   message   = "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record burn.c:2602)

Вот логи из K3b

(Нажмите, чтобы показать/скрыть)

System
-----------------------
K3b Version: 1.0.5

KDE Version: 3.5.10
QT Version:  3.3.8b
Kernel:      2.6.28-15-generic
Devices
-----------------------
ASUS DRW-1814BLT 1.04 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]

Burned media
-----------------------
DVD-R Sequential

Used versions
-----------------------
growisofs: 7.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: engaging DVD-R DAO upon user request...
PERFORM OPC failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2281848 -use-the-force-luke=dao:2281848 -dvd-compat -speed=4 -use-the-force-luke=bufsize:32m

[easy2002]

Ubuntu напрочь отказывается записывать DVD (ISO) образ на болванку.

Писала и перестала? или не писала никогда?
Гугл по запросу POWER CALIBRATION AREA ERROR рекомендует:

1. Update the firmware of your recorder. Please check the manufacturer's website for the latest version.

2. Try another brand of media.

3. Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.

4. Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.

5. Send the recorder in for service.

[Antrix]

(Нажмите, чтобы показать/скрыть)

Писала и перестала? или не писала никогда?

DATA DVD нормально записывает. Не хочет писать только образ.