Форум русскоязычного сообщества Ubuntu


Хотите сделать посильный вклад в развитие Ubuntu и русскоязычного сообщества?
Помогите нам с документацией!

Автор Тема: Проблема со звуковой карточкой =(  (Прочитано 1357 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн matriks

  • Автор темы
  • Новичок
  • *
  • Сообщений: 4
    • Просмотр профиля
Проблема со звуковой карточкой =(
« : 10 Февраль 2007, 21:24:36 »
Народ! Помогите решить проблему со звуковухой Intel.
Система ubuntu 6.10 (Edgy) на laptop lg-ls70, поднялось все кроме звука =(
звук включен в микшере
перепробовал и дрова для alsa новые и настройки разные менсть и тд, вобщем 2 днс гуглил, не помогло =(
в /var/log/messages падает мессага:
Feb 10 20:09:32 matriks-laptop kernel: [17179797.420000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Feb 10 20:09:33 matriks-laptop kernel: [17179797.564000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169

с так понимаю acpi рубит звук, как это победить?

дополнительнас инфа
root@matriks-laptop:~# cat /etc/modprobe.d/alsa-base
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-ioctl32 ; : ; }
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --Qb snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }

# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe -Qb saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
#options snd-hda-intel model=basic index=0
##options snd-hda-intel position_fix=1 model=3stack
options snd-bt87x index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-usx2y index=-2
options snd-hda-intel model=lg

============
root@matriks-laptop:~# cat /etc/modprobe.d/sound
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel

============
root@matriks-laptop:~# cat /etc/modules.conf
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-intel8x0

# module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0

# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

===========
root@matriks-laptop:~# cat /proc/asound/cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xb8000000 irq 169

===========
root@matriks-laptop:~# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
sbp2
snd-hda-intel

===========
root@matriks-laptop:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CMI9880 [CMI9880]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: CMI9880 Digital [CMI9880 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Оффлайн virens

  • Активист
  • *
  • Сообщений: 329
    • Просмотр профиля
Re: Проблема со звуковой карточкой =(
« Ответ #1 : 11 Февраль 2007, 08:52:04 »
Народ! Помогите решить проблему со звуковухой Intel.
Называется она Intel HDA, и поддержка для стого устройства есть. Полнас. На главном компе и ноутбуке у меня такас же интегрированная карта. Наслаждаюсь чистым звуком из всех шести каналов :)

Feb 10 20:09:32 matriks-laptop kernel: [17179797.420000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Feb 10 20:09:33 matriks-laptop kernel: [17179797.564000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
с так понимаю acpi рубит звук, как это победить?
Встречный вопрос: с чего ты это взсл!? Прерывание звуковой карте таки выделсется строчкой ниже.

дополнительнас инфа
Столько всего написал, а главное не выложил: dmesg наше всё. Выкладывай сюда результат
dmesg > ~/dmesg.log
Из идей:
1. Всё-таки посмотри сто: http://mydebianblog.blogspot.com/2006/07/blog-post.html вдруг что пропустил.
2. Попробуй поставить из репозиториев более СТНРОЕ ядро. Например, 2.6.15  Иногда в новых ядрах ломают поддержку чего-нибудь.
3. Если не помог п.2, раздобудь самое свежее ядро 2.6.20 и установи через адепт/синаптик.

О результатах отписываться сюда вместе с логами и подробным описанием собственных десний.

Оффлайн matriks

  • Автор темы
  • Новичок
  • *
  • Сообщений: 4
    • Просмотр профиля
Re: Проблема со звуковой карточкой =(
« Ответ #2 : 11 Февраль 2007, 16:10:01 »
1. Линку смотрел еще до того как сюда написал =) Не помогло
2-3. буду пробовать
 
dmesg выкладываю
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
[17179569.184000]  BIOS-e820: 000000001fe90000 - 000000001fe9a000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001fe9a000 - 000000001ff00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[17179569.184000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 510MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 130704
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126608 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f65b0
[17179569.184000] ACPI: RSDT (v001 PTLTD  HunterFL 0x06040000  LTP 0x00000000) @ 0x1fe90296
[17179569.184000] ACPI: FADT (v001 LGE    HunterFL 0x06040000 LGE  0x0000005f) @ 0x1fe99e88
[17179569.184000] ACPI: MADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe99efc
[17179569.184000] ACPI: HPET (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe99f64
[17179569.184000] ACPI: MCFG (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe99f9c
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1fe99fd8
[17179569.184000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20030224) @ 0x1fe9119c
[17179569.184000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20030224) @ 0x1fe90b00
[17179569.184000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1fe906bb
[17179569.184000] ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1fe904fb
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1fe902e2
[17179569.184000] ACPI: DSDT (v001 LGE    HUNTER   0x06040000 INTL 0x20030224) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda4 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Console: colour VGA+ 80x25
[17179569.184000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.184000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.184000] Memory: 508392k/522816k available (1910k kernel code, 13796k reserved, 1070k data, 308k init, 0k highmem)
[17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xe0800000), IRQs 2, 8, 0
[17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz
[17179569.184000] Using HPET for base-timer
[17179569.184000] Using HPET for gettimeofday
[17179569.184000] Detected 1729.014 MHz processor.
[17179569.184000] Using hpet for high-res timesource
[17179569.268000] Calibrating delay using timer specific routine.. 3461.68 BogoMIPS (lpj=6923364)
[17179569.268000] Security Framework v1.0.0 initialized
[17179569.268000] SELinux:  Disabled at boot.
[17179569.268000] Mount-cache hash table entries: 512
[17179569.268000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179569.268000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179569.268000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.268000] CPU: L2 cache: 2048K
[17179569.268000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[17179569.268000] Checking 'hlt' instruction... OK.
[17179569.284000] SMP alternatives: switching to UP code
[17179569.284000] Freeing SMP alternatives: 16k freed
[17179569.284000] checking if image is initramfs... it is
[17179569.808000] Freeing initrd memory: 5523k freed
[17179569.808000] ACPI: Core revision 20060707
[17179569.808000] ACPI: Looking for DSDT ... not found!
[17179569.812000] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[17179569.812000] Total of 1 processors activated (3461.68 BogoMIPS).
[17179569.812000] ENABLING IO-APIC IRQs
[17179569.812000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179569.960000] Brought up 1 CPUs
[17179569.960000] migration_cost=0
[17179569.960000] NET: Registered protocol family 16
[17179569.960000] EISA bus registered
[17179569.960000] ACPI: bus type pci registered
[17179569.960000] PCI: Using MMCONFIG
[17179569.960000] Setting up standard PCI resources
[17179569.968000] ACPI: Interpreter enabled
[17179569.968000] ACPI: Using IOAPIC for interrupt routing
[17179569.968000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.968000] PCI: Probing PCI hardware (bus 00)
[17179569.972000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[17179569.972000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[17179569.972000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179569.976000] Boot video device is 0000:01:00.0
[17179569.976000] PCI: Transparent bridge - 0000:00:1e.0
[17179569.976000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[17179569.976000] Please report the result to linux-kernel to fix this permanently
[17179569.976000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179569.976000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179569.980000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179569.980000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[17179569.980000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179569.980000] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
[17179569.980000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
[17179569.980000] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
[17179569.980000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
[17179569.980000] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
[17179569.980000] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
[17179569.980000] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
[17179569.980000] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
[17179569.980000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[17179569.988000] ACPI: Power Resource [CTHT] (off)
[17179569.988000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179569.988000] pnp: PnP ACPI init
[17179569.996000] pnp: PnP ACPI: found 13 devices
[17179569.996000] PnPBIOS: Disabled by ACPI PNP
[17179569.996000] PCI: Using ACPI for IRQ routing
[17179569.996000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179569.996000] PCI: Bridge: 0000:00:01.0
[17179569.996000]   IO window: 2000-2fff
[17179569.996000]   MEM window: b8100000-b81fffff
[17179569.996000]   PREFETCH window: c8000000-cfffffff
[17179569.996000] PCI: Bridge: 0000:00:1c.0
[17179569.996000]   IO window: 3000-3fff
[17179569.996000]   MEM window: bc000000-bfffffff
[17179569.996000]   PREFETCH window: d0000000-d3ffffff
[17179569.996000] PCI: Bridge: 0000:00:1c.2
[17179569.996000]   IO window: 4000-4fff
[17179569.996000]   MEM window: c0000000-c3ffffff
[17179569.996000]   PREFETCH window: d4000000-d7ffffff
[17179569.996000] PCI: Bus 7, cardbus bridge: 0000:06:00.0
[17179569.996000]   IO window: 00005000-000050ff
[17179569.996000]   IO window: 00005400-000054ff
[17179569.996000]   PREFETCH window: 30000000-31ffffff
[17179569.996000]   MEM window: 32000000-33ffffff
[17179569.996000] PCI: Bridge: 0000:00:1e.0
[17179569.996000]   IO window: 5000-5fff
[17179569.996000]   MEM window: c4000000-c40fffff
[17179569.996000]   PREFETCH window: 30000000-31ffffff
[17179569.996000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179569.996000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179569.996000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179569.996000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179569.996000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179569.996000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179569.996000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179569.996000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179569.996000] NET: Registered protocol family 2
[17179570.036000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.036000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.036000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.036000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.036000] TCP reno registered
[17179570.036000] Simple Boot Flag at 0x39 set to 0x1
[17179570.036000] audit: initializing netlink socket (disabled)
[17179570.036000] audit(1171206188.036:1): initialized
[17179570.036000] VFS: Disk quotas dquot_6.5.1
[17179570.036000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.036000] Initializing Cryptographic API
[17179570.036000] io scheduler noop registered
[17179570.036000] io scheduler anticipatory registered
[17179570.036000] io scheduler deadline registered
[17179570.036000] io scheduler cfq registered (default)
[17179570.036000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.036000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.036000] Allocate Port Service[0000:00:01.0:pcie03]
[17179570.036000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179570.036000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.036000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.036000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179570.036000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179570.036000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179570.036000] assign_interrupt_mode Found MSI capability
[17179570.036000] Allocate Port Service[0000:00:1c.2:pcie00]
[17179570.036000] Allocate Port Service[0000:00:1c.2:pcie02]
[17179570.036000] Allocate Port Service[0000:00:1c.2:pcie03]
[17179570.036000] isapnp: Scanning for PnP cards...
[17179570.392000] isapnp: No Plug & Play device found
[17179570.412000] Real Time Clock Driver v1.12ac
[17179570.412000] hpet_resources: 0xfed00000 is busy
[17179570.412000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.412000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.412000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.412000] mice: PS/2 mouse device common for all mice
[17179570.416000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.416000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.416000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.416000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.420000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179570.424000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179570.428000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179570.428000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179570.428000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179570.428000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.432000] EISA: Probing bus 0 at eisa.0
[17179570.432000] Cannot allocate resource for EISA slot 1
[17179570.432000] Cannot allocate resource for EISA slot 2
[17179570.432000] Cannot allocate resource for EISA slot 3
[17179570.432000] Cannot allocate resource for EISA slot 4
[17179570.432000] Cannot allocate resource for EISA slot 5
[17179570.432000] EISA: Detected 0 cards.
[17179570.432000] TCP bic registered
[17179570.432000] NET: Registered protocol family 1
[17179570.432000] NET: Registered protocol family 8
[17179570.432000] NET: Registered protocol family 20
[17179570.432000] Using IPI No-Shortcut mode
[17179570.432000] ACPI: (supports S0 S3 S4 S5)
[17179570.432000] Freeing unused kernel memory: 308k freed
[17179570.452000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.616000] Capability LSM initialized
[17179571.640000] ACPI: Transitioning device [FAN0] to D3
[17179571.640000] ACPI: Transitioning device [FAN0] to D3
[17179571.640000] ACPI: Fan [FAN0] (off)
[17179571.640000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179571.640000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179571.640000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179571.640000] ACPI: Getting cpuindex for acpiid 0x1
[17179571.644000] ACPI: Thermal Zone [TZ1] (40 C)
[17179571.648000] ACPI: Thermal Zone [TZ2] (40 C)
[17179571.892000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179571.892000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[17179571.892000] ICH6: chipset revision 4
[17179571.892000] ICH6: not 100% native mode: will probe irqs later
[17179571.892000]     ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:DMA
[17179571.892000] Probing IDE interface ide0...
[17179572.908000] hdb: HL-DT-ST DVDRAM GSA-4080N, ATAPI CD/DVD-ROM drive
[17179572.964000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179572.972000] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179572.972000] Uniform CD-ROM driver Revision: 3.20
[17179573.056000] SCSI subsystem initialized
[17179573.060000] libata version 1.20 loaded.
[17179573.060000] ahci 0000:00:1f.2: version 1.2
[17179573.060000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 225
[17179578.880000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179578.880000] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode
[17179578.880000] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
[17179578.880000] ata1: SATA max UDMA/133 cmd 0xE084E500 ctl 0x0 bmdma 0x0 irq 225
[17179578.880000] ata2: SATA max UDMA/133 cmd 0xE084E580 ctl 0x0 bmdma 0x0 irq 225
[17179578.880000] ata3: SATA max UDMA/133 cmd 0xE084E600 ctl 0x0 bmdma 0x0 irq 225
[17179578.880000] ata4: SATA max UDMA/133 cmd 0xE084E680 ctl 0x0 bmdma 0x0 irq 225
[17179579.256000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179579.256000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:3f09 87:6063 88:203f
[17179579.256000] ata1: dev 0 ATA-7, max UDMA/100, 117210240 sectors: LBA48
[17179579.256000] ata1: dev 0 configured for UDMA/100
[17179579.256000] scsi0 : ahci
[17179579.624000] ata2: SATA link down (SStatus 0)
[17179579.624000] scsi1 : ahci
[17179580.544000] ata3: SATA link down (SStatus 0)
[17179580.544000] scsi2 : ahci
[17179580.912000] ata4: SATA link down (SStatus 0)
[17179580.912000] scsi3 : ahci
[17179580.912000]   Vendor: ATA       Model: FUJITSU MHT2060B  Rev: 0000
[17179580.912000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179580.920000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179580.920000] sda: Write Protect is off
[17179580.920000] sda: Mode Sense: 00 3a 00 00
[17179580.920000] SCSI device sda: drive cache: write back
[17179580.920000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179580.920000] sda: Write Protect is off
[17179580.920000] sda: Mode Sense: 00 3a 00 00
[17179580.920000] SCSI device sda: drive cache: write back
[17179580.920000]  sda: sda1 sda2 sda3 sda4
[17179581.316000] sd 0:0:0:0: Attached scsi disk sda
[17179581.736000] Probing IDE interface ide1...
[17179581.772000] usbcore: registered new driver usbfs
[17179581.772000] usbcore: registered new driver hub
[17179581.776000] USB Universal Host Controller Interface driver v3.0
[17179581.776000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179581.776000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179581.776000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179581.776000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179581.776000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001800
[17179581.776000] usb usb1: configuration #1 chosen from 1 choice
[17179581.776000] hub 1-0:1.0: USB hub found
[17179581.776000] hub 1-0:1.0: 2 ports detected
[17179581.840000] ieee1394: Initialized config rom entry `ip1394'
[17179581.880000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 225
[17179581.880000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179581.880000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179581.880000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179581.880000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001820
[17179581.880000] usb usb2: configuration #1 chosen from 1 choice
[17179581.880000] hub 2-0:1.0: USB hub found
[17179581.880000] hub 2-0:1.0: 2 ports detected
[17179581.984000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179581.984000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179581.984000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179581.984000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179581.984000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[17179581.984000] usb usb3: configuration #1 chosen from 1 choice
[17179581.984000] hub 3-0:1.0: USB hub found
[17179581.984000] hub 3-0:1.0: 2 ports detected
[17179582.088000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179582.088000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179582.088000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179582.088000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179582.088000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[17179582.088000] usb usb4: configuration #1 chosen from 1 choice
[17179582.088000] hub 4-0:1.0: USB hub found
[17179582.088000] hub 4-0:1.0: 2 ports detected
[17179582.192000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179582.192000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179582.192000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179582.192000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179582.192000] ehci_hcd 0000:00:1d.7: debug port 1
[17179582.192000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179582.192000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xb8004000
[17179582.196000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179582.196000] usb usb5: configuration #1 chosen from 1 choice
[17179582.196000] hub 5-0:1.0: USB hub found
[17179582.196000] hub 5-0:1.0: 8 ports detected
[17179582.300000] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 169
[17179582.348000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[c4004000-c40047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179582.408000] Attempting manual resume
[17179582.428000] kjournald starting.  Commit interval 5 seconds
[17179582.428000] EXT3-fs: mounted filesystem with ordered data mode.
[17179583.620000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[5521460900e09104]
[17179592.324000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.420000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.732000] hw_random: RNG not detected
[17179592.864000] parport: PnPBIOS parport detected.
[17179592.864000] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179593.172000] irda_init()
[17179593.172000] NET: Registered protocol family 23
[17179593.356000] Linux agpgart interface v0.101 (c) Dave Jones
[17179593.368000] agpgart: Detected an Intel 915GM Chipset.
[17179593.384000] agpgart: AGP aperture is 256M @ 0x0
[17179593.436000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179593.436000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179593.536000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[17179593.576000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179593.836000] ieee80211_crypt: registered algorithm 'NULL'
[17179593.872000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179593.872000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179593.968000] ts: Compaq touchscreen protocol output
[17179593.972000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179593.972000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179593.972000] sky2 v1.6.1 addr 0xbc000000 irq 169 Yukon-EC (0xb6) rev 1
[17179593.972000] sky2 eth0: addr 00:e0:91:09:c4:f5
[17179593.976000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179593.976000] Yenta: CardBus bridge found at 0000:06:00.0 [1854:0013]
[17179593.976000] Yenta: Using INTVAL to route CSC interrupts to PCI
[17179593.976000] Yenta: Routing CardBus interrupts to PCI
[17179593.976000] Yenta TI: socket 0000:06:00.0, mfunc 0x01d01002, devctl 0x64
[17179594.116000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179594.116000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179594.116000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179594.208000] Yenta: ISA IRQ mask 0x0cd8, PCI irq 169
[17179594.208000] Socket status: 30000006
[17179594.208000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[17179594.208000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[17179594.208000] cs: IO port probe 0x5000-0x5fff: clean.
[17179594.208000] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff
[17179594.208000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179594.208000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179594.208000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179594.228000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179594.528000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[17179594.580000] sky2 eth1: enabling interface
[17179594.636000] cs: IO port probe 0x100-0x3af: clean.
[17179594.644000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179594.644000] cs: IO port probe 0x820-0x8ff: clean.
[17179594.644000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.644000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.752000] lp0: using parport0 (interrupt-driven).
[17179594.772000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179594.772000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179594.796000] Adding 1052248k swap on /dev/disk/by-uuid/4ef496c3-eb49-4a84-94f6-ba1d853ffd92.  Priority:-1 extents:1 across:1052248k
[17179594.912000] EXT3 FS on sda4, internal journal
[17179595.140000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179595.192000] NTFS volume version 3.1.
[17179595.212000] NTFS volume version 3.1.
[17179595.608000] NET: Registered protocol family 17
[17179595.916000] eth0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[17179596.228000] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both

Оффлайн doctor

  • Активист
  • *
  • Сообщений: 736
  • не навреди...
    • Просмотр профиля
Re: Проблема со звуковой карточкой =(
« Ответ #3 : 11 Февраль 2007, 16:28:28 »
Вы не пробовали прочитать правила форума?
ЗНЧЕМ постить логи?
Трудно прикрепить файл?!

Оффлайн matriks

  • Автор темы
  • Новичок
  • *
  • Сообщений: 4
    • Просмотр профиля
Re: Проблема со звуковой карточкой =(
« Ответ #4 : 12 Февраль 2007, 00:19:40 »
Ядро 2.6.20 не стало
При попытке загрузить новое ядро, не может подмаунтить root filesystem...
Делал как указано здесь http://linux.xlibs.net/2006/11/20/howto-compile-a-kernel-the-ubuntu-way/

Вобщем проблема со звуковухой остается
Какие еще будут предложенис?

Оффлайн matriks

  • Автор темы
  • Новичок
  • *
  • Сообщений: 4
    • Просмотр профиля
Re: Проблема со звуковой карточкой =(
« Ответ #5 : 12 Февраль 2007, 20:54:34 »
To doctor: sorry...

Поставил новое ядро 2.6.20, загрузился с ним, все равно звука нет =(

 

Страница сгенерирована за 0.063 секунд. Запросов: 22.