Да самый обычный скрипт который рисует часики и круги. Я его только немного модифицировал вынеся настроки некоторые в переменные и убрав часть вычислений из циклов.
--[[
Clock Rings by Linux Mint (2011) reEdited by despot77
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings
Changelog:
+ v1.0 -- Original release (30.09.2009)
v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]
--Colors
set_color_fg=0x6688FF
set_color_bg=0xffffff
--Clock
clock_position_x = 400
clock_position_y = 100
clock_radius = 65
--CPU
cpu_position_x=120
cpu_position_y=180
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=set_color_bg,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=set_color_fg,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.2,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=clock_position_x, y=clock_position_y,
-- "radius" is the radius of the ring.
radius=clock_radius-15,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%M',
max=60,
bg_colour=set_color_bg,
bg_alpha=0.1,
fg_colour=set_color_fg,
fg_alpha=0.4,
x=clock_position_x, y=clock_position_y,
radius=clock_radius-9,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=set_color_bg,
bg_alpha=0.1,
fg_colour=set_color_fg,
fg_alpha=0.6,
x=clock_position_x, y=clock_position_y,
radius=clock_radius-3,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%d',
max=31,
bg_colour=set_color_bg,
bg_alpha=0.1,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=clock_position_x, y=clock_position_y,
radius=clock_radius+5,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='time',
arg='%m',
max=12,
bg_colour=set_color_bg,
bg_alpha=0.1,
fg_colour=set_color_fg,
fg_alpha=1,
x=clock_position_x, y=clock_position_y,
radius=clock_radius+11,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='memperc',
arg='',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=240, y=125,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=240, y=235,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=cpu_position_x, y=cpu_position_y,
radius=80,
thickness=8,
start_angle=-90,
end_angle=180
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=cpu_position_x, y=cpu_position_y,
radius=70,
thickness=8,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=1210, y=80,
radius=35,
thickness=8,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/home',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=1210, y=180,
radius=35,
thickness=8,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/mnt/dev/storage',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=1210, y=280,
radius=35,
thickness=8,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/mnt/multidata',
max=100,
bg_colour=set_color_bg,
bg_alpha=0.2,
fg_colour=set_color_fg,
fg_alpha=0.8,
x=1210, y=380,
radius=35,
thickness=8,
start_angle=-90,
end_angle=180
}
}
-- Use these settings to define the origin and extent of your clock.
clock_r=clock_radius
clock_rh=clock_r-14
clock_rm=clock_r-8
clock_rs=clock_r
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=clock_position_x
clock_y=clock_position_y
show_seconds=true
premath_2pi360 = 2*math.pi/360
premath_2pi60 = 2*math.pi/60
premath_2pi12 = 2*math.pi/12
premath_pi2 = math.pi/2
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(premath_2pi360)-premath_pi2
local angle_f=ea*(premath_2pi360)-premath_pi2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=premath_2pi60*secs
mins_arc=premath_2pi60*mins+secs_arc/60
hours_arc=premath_2pi12*hours+mins_arc/12
-- Draw hour hand
xh=xc+clock_rh*math.sin(hours_arc)
yh=yc-clock_rh*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
cairo_stroke(cr)
-- Draw minute hand
xm=xc+clock_rm*math.sin(mins_arc)
ym=yc-clock_rm*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+clock_rs*math.sin(secs_arc)
ys=yc-clock_rs*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num > 5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end
Ну что значит свои коньки? Ну конфиг у них один, а исполняемый файл, ну он же ничей... Общий т.е.
Тема: [HOWTO] Conky - мощный монитор для XWindow (Прочитано 928821 раз)
