Добрый день! Как посмотреть, что нижеприведенные условия выполнены?
Можно ли их менять в текущем работающем ядре?
(P.S. Надо выставить указанные значения, но не знаю как.)
5. Driver installation
======================
As noted above, kernel 2.6.19 is the minimum for this driver; for it to work
properly, the driver needs kernel support for Video4Linux and USB.
The following options of the kernel configuration file must be enabled and
corresponding modules must be compiled:
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
To enable advanced debugging functionality on the device through /sysfs:
# Multimedia devices
#
CONFIG_VIDEO_ADV_DEBUG=y
On the contrary, to disable the debugging functionality, it's necessary to both
set CONFIG_VIDEO_ADV_DEBUG=n and remove its definition from the Kbuild file
provided with the SN9C1xx driver.
# USB support
#
CONFIG_USB=m
In addition, depending on the hardware being used, the modules below are
necessary:
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
и т.п.