Форум русскоязычного сообщества Ubuntu


Получить помощь и пообщаться с другими пользователями Ubuntu можно
на irc канале #ubuntu-ru в сети Freenode
и в Jabber конференции ubuntu@conference.jabber.ru

Автор Тема: Как заставить работать USB устройства?  (Прочитано 1826 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн ridost

  • Автор темы
  • Любитель
  • *
  • Сообщений: 84
    • Просмотр профиля
По данному вопросу писал уже здесь https://forum.ubuntu.ru/index.php?topic=85709.msg645450#msg645450

Перестали работать любые usb устройства, кроме мышки. Причем ноутбук "понимает", что устройство присоединено, но не показывает вида. Если запустить здесь же виртуальную машину XP, то там эти же устройства работают. Как решить данную проблему?

Оффлайн Goury

  • Участник
  • *
  • Сообщений: 216
  • овц
    • Просмотр профиля
    • Russian Slayers Anime Community
Re: Как заставить работать USB устройства?
« Ответ #1 : 03 Март 2010, 10:28:17 »
а маунт не работает ?
/dev/sd* нету ?
1) сисадмин всегда прав<br />2) если сисадмин неправ - см пункт 1

Oni-chan

  • Гость
Re: Как заставить работать USB устройства?
« Ответ #2 : 03 Март 2010, 10:33:31 »
что пишет dmesg после присоединения устройства?

Оффлайн ridost

  • Автор темы
  • Любитель
  • *
  • Сообщений: 84
    • Просмотр профиля
Re: Как заставить работать USB устройства?
« Ответ #3 : 03 Март 2010, 15:43:21 »
что пишет dmesg после присоединения устройства?

После этой команды пишет очень много, даже все не влезло:
put/input5
[    1.804620] ata1.00: ATA-6: ST9100822A, 3.01, max UDMA/100
[    1.804624] ata1.00: 195371568 sectors, multi 16: LBA48
[    1.804659] ata1.01: ATAPI: MATSHITAUJ-845D, D100, max UDMA/33
[    1.816015] Clocksource tsc unstable (delta = -204686991 ns)
[    1.820521] ata1.00: configured for UDMA/100
[    1.836362] ata1.01: configured for UDMA/33
[    1.836942] scsi 0:0:0:0: Direct-Access     ATA      ST9100822A       3.01 PQ: 0 ANSI: 5
[    1.837044] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.838782] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[    1.838829] sd 0:0:0:0: [sda] Write Protect is off
[    1.838832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.838856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.838976]  sda:
[    1.839085] scsi 0:0:1:0: CD-ROM            MATSHITA UJ-845D          D100 PQ: 0 ANSI: 5
[    1.868163]  sda1 sda2 < sda5 >
[    1.900123] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.902333] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    1.902337] Uniform CD-ROM driver Revision: 3.20
[    1.902401] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.902440] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.902462] Freeing unused kernel memory: 540k freed
[    1.902763] Write protecting the kernel text: 4568k
[    1.902799] Write protecting the kernel read-only data: 1836k
[    2.019688] Linux agpgart interface v0.103
[    2.076458] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[    2.076507] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.081138] tg3.c:v3.99 (April 20, 2009)
[    2.081157] tg3 0000:06:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.122925] tg3 0000:06:08.0: wake-up capability disabled by ACPI
[    2.122933] tg3 0000:06:08.0: PME# disabled
[    2.268120] [drm] Initialized drm 1.1.0 20060810
[    2.287931] [drm] radeon default to kernel modesetting DISABLED.
[    2.288116] pci 0000:01:00.0: power state changed by ACPI to D0
[    2.288129] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.288135] pci 0000:01:00.0: setting latency timer to 64
[    2.288280] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[    2.289734] eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:bc:4f:a4
[    2.289739] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
[    2.289742] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.289744] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[    2.290026] ohci1394 0000:06:01.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.344043] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[b0217000-b02177ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.058244] xor: automatically using best checksumming function: pIII_sse
[    3.076005]    pIII_sse  :  5180.000 MB/sec
[    3.076008] xor: using function: pIII_sse (5180.000 MB/sec)
[    3.079215] device-mapper: dm-raid45: initialized v0.2594b
[    3.249435] PM: Starting manual resume from disk
[    3.249440] PM: Resume from partition 8:5
[    3.249442] PM: Checking hibernation image.
[    3.249592] PM: Resume from disk failed.
[    3.281802] EXT4-fs (sda1): barriers enabled
[    3.308069] kjournald2 starting: pid 391, dev sda1:8, commit interval 5 seconds
[    3.308080] EXT4-fs (sda1): delayed allocation enabled
[    3.308083] EXT4-fs: file extents enabled
[    3.310081] EXT4-fs: mballoc enabled
[    3.310095] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.620136] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000064bd3e]
[   13.116025] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   13.344145] usb 3-2: configuration #1 chosen from 1 choice
[   22.477228] Adding 4016208k swap on /dev/sda5.  Priority:-1 extents:1 across:4016208k
[   22.589283] udev: starting version 147
[   22.612849] EXT4-fs (sda1): internal journal on sda1:8
[   22.675818] lp: driver loaded but no devices found
[   22.676540] irda_init()
[   22.676555] NET: Registered protocol family 23
[   22.679383] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[   22.679407] nsc-ircc, chip->init
[   22.679417] nsc-ircc, Found chip at base=0x164e
[   22.679444] nsc-ircc, driver loaded (Dag Brattli)
[   22.679451] nsc_ircc_open(), can't get iobase of 0x2f8
[   22.679482] nsc-ircc, Found chip at base=0x164e
[   22.679509] nsc-ircc, driver loaded (Dag Brattli)
[   22.679512] nsc_ircc_open(), can't get iobase of 0x2f8
[   22.679746] nsc-ircc 00:06: disabled
[   22.949636] tg3 0000:06:08.0: firmware: requesting tigon/tg3_tso5.bin
[   22.952816] tg3 0000:06:08.0: wake-up capability disabled by ACPI
[   22.952823] tg3 0000:06:08.0: PME# disabled
[   23.244960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.425020] intel_rng: FWH not detected
[   23.468333] acer-wmi: Acer Laptop ACPI-WMI Extras
[   23.468351] acer-wmi: No or unsupported WMI interface, unable to load
[   23.582555] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   23.582583] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   23.900023] intel8x0_measure_ac97_clock: measured 54167 usecs (2610 samples)
[   23.900027] intel8x0: clocking to 48000
[   24.042819] yenta_cardbus 0000:06:01.0: CardBus bridge found [1025:0066]
[   24.042837] yenta_cardbus 0000:06:01.0: Enabling burst memory read transactions
[   24.042841] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[   24.042844] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[   24.042849] yenta_cardbus 0000:06:01.0: TI: mfunc 0x01c21b22, devctl 0x64
[   24.048102] lib80211: common routines for IEEE802.11 drivers
[   24.048105] lib80211_crypt: registered algorithm 'NULL'
[   24.084199] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   24.084202] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   24.094935] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   24.094939] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   24.102982] ttyS1: LSR safety check engaged!
[   24.218516] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.280625] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   24.280630] yenta_cardbus 0000:06:01.0: Socket status: 30000006
[   24.280635] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #08
[   24.280644] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   24.280648] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean.
[   24.280861] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[   24.280864] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[   24.281947] ipw2200 0000:06:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   24.282021] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   24.282059] ipw2200 0000:06:03.0: firmware: requesting ipw2200-bss.fw
[   24.456197] usbcore: registered new interface driver hiddev
[   24.456256] usbcore: registered new interface driver usbhid
[   24.456258] usbhid: v2.6:USB HID core driver
[   24.534031] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   24.535224] tifm_7xx1 0000:06:01.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   24.564044] tifm_core: MMC/SD card detected in socket 0:3
[   24.582584] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[   24.582686] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-2/input0
[   24.678809] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   24.679973] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   24.680500] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   24.680912] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   24.681459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   24.754445] mmc0: new SD card at address 9520
[   24.758697] mmcblk0: mmc0:9520 SU02G 1.89 GiB
[   24.758757]  mmcblk0: p1
[   24.767943] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[   24.787063] type=1505 audit(1267585743.682:2): operation="profile_load" pid=1166 name=/usr/share/gdm/guest-session/Xsession
[   24.788844] type=1505 audit(1267585743.686:3): operation="profile_load" pid=1167 name=/sbin/dhclient3
[   24.789485] type=1505 audit(1267585743.686:4): operation="profile_load" pid=1167 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   24.789845] type=1505 audit(1267585743.686:5): operation="profile_load" pid=1167 name=/usr/lib/connman/scripts/dhclient-script
[   24.794555] type=1505 audit(1267585743.690:6): operation="profile_load" pid=1168 name=/usr/bin/evince
[   24.806629] type=1505 audit(1267585743.702:7): operation="profile_load" pid=1168 name=/usr/bin/evince-previewer
[   24.811192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   24.828471] type=1505 audit(1267585743.726:8): operation="profile_load" pid=1168 name=/usr/bin/evince-thumbnailer
[   24.908966] type=1505 audit(1267585743.806:9): operation="profile_load" pid=1179 name=/usr/bin/freshclam
[   24.911077] type=1505 audit(1267585743.806:10): operation="profile_load" pid=1180 name=/usr/lib/cups/backend/cups-pdf
[   24.911827] type=1505 audit(1267585743.806:11): operation="profile_load" pid=1180 name=/usr/sbin/cupsd
[   29.454596] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   29.454600] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[   29.454602] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   29.454603] vboxdrv: the usage of hardware performance counters by
[   29.454604] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   29.454608] vboxdrv: Found 1 processor cores.
[   29.454713] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   29.454716] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
[   30.061358] ppdev: user-space parallel port driver
[   31.169627] __ratelimit: 6 callbacks suppressed
[   31.169630] ACPI: EC: missing confirmations, switch off interrupt mode.
[   34.217867] [drm] Setting GART location based on new memory map
[   34.220056] [drm] Loading R400 Microcode
[   34.220098] [drm] Num pipes: 2
[   34.220105] [drm] writeback test succeeded in 1 usecs
[   35.076015] eth1: no IPv6 routers present
[   71.485166] gvfs-gdu-volume[2434]: segfault at c ip 0044dfa7 sp bf84266c error 4 in libgdu.so.0.0.0[43b000+31000]
[   71.723227] gvfs-gdu-volume[2442]: segfault at c ip 00a49fa7 sp bf98162c error 4 in libgdu.so.0.0.0[a37000+31000]
[   71.917111] lib80211_crypt: registered algorithm 'WEP'
[  117.812788] chromium-browse[2710]: segfault at 13c ip 08cf0544 sp bf83b880 error 4 in chromium-browser[8048000+225d000]
[  228.208712] sr 0:0:1:0: [sr0] Unhandled sense code
[  228.208721] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  228.208729] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[  228.208740] sr 0:0:1:0: [sr0] Add. Sense: No seek complete
[  228.208750] end_request: I/O error, dev sr0, sector 9180288
[  228.208761] Buffer I/O error on device sr0, logical block 1147536
[  229.152061] usb 1-8: new high speed USB device using ehci_hcd and address 3
[  229.290995] usb 1-8: configuration #1 chosen from 1 choice
[  235.493153] sr 0:0:1:0: [sr0] Unhandled sense code
[  235.493162] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  235.493171] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[  235.493181] sr 0:0:1:0: [sr0] Add. Sense: No seek complete
[  235.493192] end_request: I/O error, dev sr0, sector 9180288
[  235.493203] Buffer I/O error on device sr0, logical block 1147536
[  235.550622] Initializing USB Mass Storage driver...
[  235.553198] scsi2 : SCSI emulation for USB Mass Storage devices
[  235.553505] usbcore: registered new interface driver usb-storage
[  235.553513] USB Mass Storage support registered.
[  235.554561] usb-storage: device found at 3
[  235.554567] usb-storage: waiting for device to settle before scanning
[  240.560102] usb-storage: device scan complete
[  240.560526] scsi 2:0:0:0: Direct-Access     ST916082 1AS              3.AL PQ: 0 ANSI: 0
[  240.560906] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  240.566406] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  240.568769] sd 2:0:0:0: [sdb] Write Protect is off
[  240.568772] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  240.568775] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  240.575485] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  240.575492]  sdb: sdb2 < sdb5 >


Пользователь решил продолжить мысль 03 Март 2010, 13:44:03:
что пишет dmesg после присоединения устройства?

Продолжение
[  240.620282] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  240.620290] sd 2:0:0:0: [sdb] Attached SCSI disk
[  242.350018] sr 0:0:1:0: [sr0] Unhandled sense code
[  242.350027] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  242.350036] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[  242.350046] sr 0:0:1:0: [sr0] Add. Sense: No seek complete
[  242.350057] end_request: I/O error, dev sr0, sector 9180400
[  242.350068] Buffer I/O error on device sr0, logical block 1147550
[  249.205115] sr 0:0:1:0: [sr0] Unhandled sense code
[  249.205124] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  249.205133] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[  249.205143] sr 0:0:1:0: [sr0] Add. Sense: No seek complete
[  249.205154] end_request: I/O error, dev sr0, sector 9180400
[  249.205164] Buffer I/O error on device sr0, logical block 1147550
[  256.791564] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[  435.197204] gvfs-gdu-volume[3040]: segfault at c ip 007cdfa7 sp bfebd25c error 4 in libgdu.so.0.0.0[7bb000+31000]
[  445.596402] gnome-panel[2380]: segfault at 4 ip 00b8d546 sp bfc002a0 error 4 in libglobalmenu-plugin.so[b7e000+13000]
[  446.337717] gvfs-gdu-volume[3053]: segfault at c ip 007c1fa7 sp bfe65f8c error 4 in libgdu.so.0.0.0[7af000+31000]
[  703.984044] usb 1-6: new high speed USB device using ehci_hcd and address 4
[  704.121858] usb 1-6: configuration #1 chosen from 1 choice
[  704.124500] hub 1-6:1.0: USB hub found
[  704.128622] hub 1-6:1.0: 7 ports detected
[  707.742219] usb 1-8: USB disconnect, address 3
[  772.524063] usb 1-6: USB disconnect, address 4
[  786.576072] usb 3-2: USB disconnect, address 2
[  789.008055] usb 5-2: new low speed USB device using uhci_hcd and address 2
[  789.180243] usb 5-2: configuration #1 chosen from 1 choice
[  789.199957] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input9
[  789.206203] a4tech 0003:09DA:000A.0002: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.3-2/input0
[  802.556085] usb 1-6: new high speed USB device using ehci_hcd and address 6
[  802.689151] usb 1-6: configuration #1 chosen from 1 choice
[  802.691843] scsi3 : SCSI emulation for USB Mass Storage devices
[  802.694320] usb-storage: device found at 6
[  802.694327] usb-storage: waiting for device to settle before scanning
[  807.694410] usb-storage: device scan complete
[  807.694921] scsi 3:0:0:0: Direct-Access     ST916082 1AS              3.AL PQ: 0 ANSI: 0
[  807.695723] sd 3:0:0:0: Attached scsi generic sg2 type 0
[  807.720901] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  807.724215] sd 3:0:0:0: [sdb] Write Protect is off
[  807.724220] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  807.724223] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  807.728869] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  807.728876]  sdb: sdb2 < sdb5 >
[  807.780386] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  807.780393] sd 3:0:0:0: [sdb] Attached SCSI disk
[  877.153122] gvfs-gdu-volume[3260]: segfault at c ip 00f4efa7 sp bf8d069c error 4 in libgdu.so.0.0.0[f3c000+31000]
[  881.881156] usb 1-6: USB disconnect, address 6
[  885.776073] usb 5-2: USB disconnect, address 2
[  888.468054] usb 3-2: new low speed USB device using uhci_hcd and address 3
[  888.641241] usb 3-2: configuration #1 chosen from 1 choice
[  888.671656] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input10
[  888.671756] a4tech 0003:09DA:000A.0003: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-2/input0
[ 1188.204042] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 1188.386241] usb 4-2: configuration #1 chosen from 1 choice
[ 1188.450668] cdc_acm 4-2:1.8: ttyACM0: USB ACM device
[ 1188.460610] usbcore: registered new interface driver cdc_acm
[ 1188.460615] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1188.473000] NET: Registered protocol family 35
[ 1188.543925] usbcore: registered new interface driver cdc_ether
[ 1188.634697] usbcore: registered new interface driver cdc_phonet
[ 1188.635978] usb 4-2: bad CDC descriptors
[ 1188.636023] usbcore: registered new interface driver rndis_host
[ 1188.690416] cfg80211: Calling CRDA to update world regulatory domain
[ 1188.712878] usb 4-2: bad CDC descriptors
[ 1188.712932] usbcore: registered new interface driver rndis_wlan
[ 1188.741089] cfg80211: World regulatory domain updated:
[ 1188.741093]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1188.741096]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1188.741099]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1188.741102]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1188.741105]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1188.741108]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1197.801377] PPP BSD Compression module registered
[ 1197.844775] PPP Deflate Compression module registered
[ 1278.068807] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 1509.816046] usb 1-8: new high speed USB device using ehci_hcd and address 9
[ 1510.073392] usb 1-8: configuration #1 chosen from 1 choice
[ 1510.073606] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1510.073712] usb-storage: device found at 9
[ 1510.073715] usb-storage: waiting for device to settle before scanning
[ 1515.072762] usb-storage: device scan complete
[ 1515.073773] scsi 4:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 1515.074608] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1515.097851] sd 4:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 1515.098596] sd 4:0:0:0: [sdb] Write Protect is off
[ 1515.098599] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1515.098602] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1515.104634] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1515.104641]  sdb: sdb1
[ 1515.125283] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1515.125291] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1557.088055] usb 1-8: reset high speed USB device using ehci_hcd and address 9
[ 1557.437416] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1557.455865] usb-storage: device found at 9
[ 1557.455872] usb-storage: waiting for device to settle before scanning
[ 1562.456882] usb-storage: device scan complete
[ 1562.457547] scsi 5:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 1562.457957] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1562.483416] sd 5:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 1562.484540] sd 5:0:0:0: [sdb] Write Protect is off
[ 1562.484546] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1562.484549] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1562.501879] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1562.501887]  sdb: sdb1
[ 1562.524873] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1562.524883] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 2553.276682] usb 1-8: USB disconnect, address 9
[ 2557.309022] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 2557.738268] usb 5-2: configuration #1 chosen from 1 choice
[ 2557.807583] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 2557.807740] usbcore: registered new interface driver btusb
[ 2558.051069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2558.051074] Bluetooth: BNEP filters: protocol multicast
[ 2558.119454] Bridge firewalling registered
[ 2717.256092] usb 5-2: USB disconnect, address 3
[ 2717.257090] btusb_intr_complete: hci0 urb efe6d000 failed to resubmit (19)
[ 2717.257104] btusb_bulk_complete: hci0 urb f2823900 failed to resubmit (19)
[ 2717.258081] btusb_bulk_complete: hci0 urb f24af080 failed to resubmit (19)
[ 2717.259070] btusb_send_frame: hci0 urb d8b85d80 submission failed
[ 2743.644042] usb 1-8: new high speed USB device using ehci_hcd and address 11
[ 2743.886886] usb 1-8: configuration #1 chosen from 1 choice
[ 2743.889808] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2743.890030] usb-storage: device found at 11
[ 2743.890035] usb-storage: waiting for device to settle before scanning
[ 2748.888652] usb-storage: device scan complete
[ 2748.889401] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2748.890221] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2748.913839] sd 6:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 2748.915199] sd 6:0:0:0: [sdb] Write Protect is off
[ 2748.915203] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2748.915206] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924812] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924820]  sdb: sdb1
[ 2748.943591] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.943598] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2838.928052] usb 1-8: reset high speed USB device using ehci_hcd and address 11
[ 2839.281373] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2839.293298] usb-storage: device found at 11
[ 2839.293304] usb-storage: waiting for device to settle before scanning
[ 2844.293674] usb-storage: device scan complete
[ 2844.294408] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2844.295231] sd 7:0:0:0: Attached scsi generic sg2 type 0


Пользователь решил продолжить мысль 03 Март 2010, 15:46:03:
что пишет dmesg после присоединения устройства?

Еще много можно добавлять текста из того, что выдала эта команда, добавить?
« Последнее редактирование: 03 Март 2010, 15:46:04 от ridost »

Oni-chan

  • Гость
Re: Как заставить работать USB устройства?
« Ответ #4 : 03 Март 2010, 15:54:32 »
ну, в конце ты подлючил флешку
[ 2743.890030] usb-storage: device found at 11
[ 2743.890035] usb-storage: waiting for device to settle before scanning
[ 2748.888652] usb-storage: device scan complete
[ 2748.889401] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2748.890221] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2748.913839] sd 6:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 2748.915199] sd 6:0:0:0: [sdb] Write Protect is off
[ 2748.915203] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2748.915206] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924812] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924820]  sdb: sdb1
[ 2748.943591] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.943598] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2838.928052] usb 1-8: reset high speed USB device using ehci_hcd and address 11
[ 2839.281373] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2839.293298] usb-storage: device found at 11
[ 2839.293304] usb-storage: waiting for device to settle before scanning
[ 2844.293674] usb-storage: device scan complete
[ 2844.294408] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2844.295231] sd 7:0:0:0: Attached scsi generic sg2 type 0

она нормально определилась. Сделай pmount /dev/sdb1

Вообще, вроде у тебя всё нормально определялось.

Может, у тебя удалён hal?

Оффлайн ridost

  • Автор темы
  • Любитель
  • *
  • Сообщений: 84
    • Просмотр профиля
Re: Как заставить работать USB устройства?
« Ответ #5 : 03 Март 2010, 16:13:38 »
ну, в конце ты подлючил флешку
[ 2743.890030] usb-storage: device found at 11
[ 2743.890035] usb-storage: waiting for device to settle before scanning
[ 2748.888652] usb-storage: device scan complete
[ 2748.889401] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2748.890221] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2748.913839] sd 6:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 2748.915199] sd 6:0:0:0: [sdb] Write Protect is off
[ 2748.915203] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2748.915206] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924812] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.924820]  sdb: sdb1
[ 2748.943591] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2748.943598] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2838.928052] usb 1-8: reset high speed USB device using ehci_hcd and address 11
[ 2839.281373] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2839.293298] usb-storage: device found at 11
[ 2839.293304] usb-storage: waiting for device to settle before scanning
[ 2844.293674] usb-storage: device scan complete
[ 2844.294408] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[ 2844.295231] sd 7:0:0:0: Attached scsi generic sg2 type 0

она нормально определилась. Сделай pmount /dev/sdb1

Вообще, вроде у тебя всё нормально определялось.

Может, у тебя удалён hal?
hal стоит, все обязательные и рекомендованные пакеты стоят.
pmount /dev/sdb1 - пишет, что устройства нет, перебрал sdb1 - sdb10, все равно нет.
ноутбук точно понимает, что флешка присоединена, но ее нигде не видно.
в папке /media есть подозрительный объект под названием 115Е-121В, который не удаляется (кнопка удалить не активна) и не открывается, а на папке крестит стоит. Может его удалить и это поможет?

Оффлайн ridost

  • Автор темы
  • Любитель
  • *
  • Сообщений: 84
    • Просмотр профиля
Re: Как заставить работать USB устройства?
« Ответ #6 : 12 Март 2010, 10:17:47 »
Решим проблему несколько криво. Нашел в система - администрирование- дисковая утилита - кнопку монтировать устройство. Пока таким методом справляюсь. Хотя, конечно, хотелось бы вернуть данный процесс в автоматический режим.

 

Страница сгенерирована за 0.063 секунд. Запросов: 22.