Форум русскоязычного сообщества Ubuntu


Автор Тема: Samba не запускается, косяк с гостевой учеткой.  (Прочитано 2926 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн matt

  • Автор темы
  • Новичок
  • *
  • Сообщений: 21
    • Просмотр профиля
День добрый !
Приношу извинения если задаю нубский вопрос, на за никс я только сел, поэтому знаний минимум.

Проблема такая, поставил самбу настроил первый день работала нормально, потом комп ребутнулся из за перепада напряжения, самба не запускается.
Опытным путем обнаружил что если в конфиге закоментировать строку "guest account = guest" то самба запускается на ура, есле же раскоментировать то в логах такая вот ошибка
[2010/04/02 08:16:32, 0] smbd/server.c:main(944)
  smbd version 3.0.28a started.
  Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/04/02 08:16:32, 0] printing/print_cups.c:cups_connect(69)
  Unable to connect to CUPS server localhost:631 - В соединении отказано
[2010/04/02 08:16:32, 0] printing/print_cups.c:cups_connect(69)
  Unable to connect to CUPS server localhost:631 - В соединении отказано
[2010/04/02 08:16:32, 0] passdb/pdb_interface.c:guest_user_info(256)
  guest_user_info: Unable to locate guest account [guest]!
[2010/04/02 08:16:32, 0] smbd/server.c:main(1059)
  ERROR: failed to setup guest info.

Как я понимаю самба на отрез отказывается работать с гостевой учеткой (хотя до ребута все работало шикарно...

Вот конфиг самбы
#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = HOME

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
interfaces = 190.160.0.0/10 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user

guest account = guest
# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 

passdb backend = tdbsam

obey pam restrictions = yes

invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections
# map to guest = bad user



########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================
[Сериалы]
comment = Сериалы
path = /media/1 TB
read only = no
writable = yes
guest ok = yes
browseable = yes



[Фильмы]
comment = Фильмы
path = /media/500 Gb
read only = no
writable = yes
guest ok = yes
browseable = yes

Помогите запустить самбу с возможностью гостевой учетки

Оффлайн easy2002

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 2786
  • Мурманск
    • Просмотр профиля
guest account = nobody
?
Tempora mutantur et nos mutantur in illis

Оффлайн matt

  • Автор темы
  • Новичок
  • *
  • Сообщений: 21
    • Просмотр профиля
почти помогло, запустится запускается, но когда захожу на ресурс выдает табличку с запросом логина и пароля

Оффлайн podkovyrsty

  • Старожил
  • *
  • Сообщений: 1547
  • Content-Type: alternative
    • Просмотр профиля
security = share
Шаг за шагом можно достичь цели.

Оффлайн matt

  • Автор темы
  • Новичок
  • *
  • Сообщений: 21
    • Просмотр профиля
ой товарищи, огромное спасибо !!! Все заработало !!!

 

Страница сгенерирована за 0.056 секунд. Запросов: 22.