[ 0.616292] Cannot allocate resource for EISA slot 6
[ 0.616294] Cannot allocate resource for EISA slot 7
[ 0.616296] Cannot allocate resource for EISA slot 8
[ 0.616298] EISA: Detected 0 cards.
[ 0.616348] cpuidle: using governor ladder
[ 0.616405] cpuidle: using governor menu
[ 0.616407] EFI Variables Facility v0.08 2004-May-17
[ 0.616595] ashmem: initialized
[ 0.616744] TCP: cubic registered
[ 0.616861] NET: Registered protocol family 10
[ 0.617067] NET: Registered protocol family 17
[ 0.617080] Key type dns_resolver registered
[ 0.617164] Using IPI No-Shortcut mode
[ 0.617251] PM: Hibernation image not present or could not be loaded.
[ 0.617264] registered taskstats version 1
[ 0.619768] Key type trusted registered
[ 0.621887] Key type encrypted registered
[ 0.624681] Magic number: 9:750:877
[ 0.624786] rtc_cmos 00:06: setting system clock to 2013-04-21 08:53:41 UTC (1366534421)
[ 0.625381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.625383] EDD information not available.
[ 0.654817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.925790] isapnp: No Plug & Play device found
[ 1.092114] usb 2-6: new high-speed USB device number 2 using ehci_hcd
[ 1.229359] usb 2-6: New USB device found, idVendor=17ef, idProduct=4810
[ 1.229365] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.229370] usb 2-6: Product: Integrated Camera
[ 1.229375] usb 2-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.391363] ACPI: Battery Slot [BAT1] (battery present)
[ 1.391506] Freeing unused kernel memory: 756k freed
[ 1.391841] Write protecting the kernel text: 5960k
[ 1.391864] Write protecting the kernel read-only data: 2412k
[ 1.391867] NX-protecting the kernel data: 4280k
[ 1.410869] udevd[92]: starting version 175
[ 1.435762] xor: automatically using best checksumming function:
[ 1.468032] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.472019] pIII_sse : 7299.000 MB/sec
[ 1.472722] device-mapper: dm-raid45: initialized v0.2594b
[ 1.641411] usb 3-1: New USB device found, idVendor=0458, idProduct=003a
[ 1.641417] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.641421] usb 3-1: Product: Optical Mouse
[ 1.641424] usb 3-1: Manufacturer: Genius
[ 1.665139] sdhci: Secure Digital Host Controller Interface driver
[ 1.665144] sdhci: Copyright(c) Pierre Ossman
[ 1.665450] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 1.665525] mmc0: no vmmc regulator found
[ 1.665566] Registered led device: mmc0::
[ 1.678111] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.678406] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 1.681635] r8169 0000:08:00.0: eth0: RTL8168d/8111d at 0xf842a000, 00:26:9e:bb:a6:67, XID 081000c0 IRQ 46
[ 1.681640] r8169 0000:08:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.693702] ahci 0000:00:1f.2: version 3.0
[ 1.693782] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 1.693848] ahci: SSS flag set, parallel bus scan disabled
[ 1.693891] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.693896] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.693902] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.696196] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.696225] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 1.696250] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 1.716980] scsi0 : ahci
[ 1.717093] scsi1 : ahci
[ 1.717175] scsi2 : ahci
[ 1.717256] scsi3 : ahci
[ 1.717335] scsi4 : ahci
[ 1.717414] scsi5 : ahci
[ 1.717730] ata1: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04100 irq 47
[ 1.717734] ata2: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04180 irq 47
[ 1.717736] ata3: DUMMY
[ 1.717738] ata4: DUMMY
[ 1.717742] ata5: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04300 irq 47
[ 1.717746] ata6: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04380 irq 47
[ 2.036125] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.036996] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.037004] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.037367] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
[ 2.037373] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.038404] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.038411] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.038774] ata1.00: configured for UDMA/100
[ 2.039016] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5
[ 2.039209] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.039218] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.039299] sd 0:0:0:0: [sda] Write Protect is off
[ 2.039303] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.039325] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.356080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.360323] ata2.00: unexpected _GTF length (
[ 2.360330] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RS06, max UDMA/133
[ 2.365123] ata2.00: unexpected _GTF length (
[ 2.365131] ata2.00: configured for UDMA/133
[ 2.395084] sda: sda1 sda2 < sda5 >
[ 2.395537] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.398584] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RS06 PQ: 0 ANSI: 5
[ 2.403531] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.403536] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.403721] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.403814] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.720131] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.040120] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.059551] usbcore: registered new interface driver usbhid
[ 3.059557] usbhid: USB HID core driver
[ 3.062371] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input5
[ 3.062624] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 3.274699] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.274704] EXT4-fs (sda1): write access will be enabled during recovery
[ 4.984903] EXT4-fs (sda1): recovery complete
[ 4.989537] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.817258] Adding 1956860k swap on /dev/sda5. Priority:-1 extents:1 across:1956860k
[ 19.823645] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.862744] udevd[370]: starting version 175
[ 19.929515] lp: driver loaded but no devices found
[ 20.168698] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.186169] Non-volatile memory driver v1.3
[ 20.210128] wmi: Mapper loaded
[ 20.235597] [drm] Initialized drm 1.1.0 20060810
[ 20.256336] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 20.256340] thinkpad_acpi:
http://ibm-acpi.sf.net/[ 20.256342] thinkpad_acpi: ThinkPad BIOS 6JET82WW (1.40 ), EC 6JHT65WW-1.185000
[ 20.256345] thinkpad_acpi: Lenovo ThinkPad SL510, model 28476LG
[ 20.256994] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 20.257314] thinkpad_acpi: radio switch found; radios are enabled
[ 20.257361] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 20.257495] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 20.257497] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 20.258962] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 20.265130] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 20.265741] Registered led device: tpacpi::thinklight
[ 20.267168] Registered led device: tpacpi::power
[ 20.267229] Registered led device: tpacpi::standby
[ 20.267278] Registered led device: tpacpi::thinkvantage
[ 20.305100] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 20.305285] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 20.308659] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 20.323564] i915 0000:00:02.0: setting latency timer to 64
[ 20.324922] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 20.324934] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.324936] [drm] Driver supports precise vblank timestamp query.
[ 20.324987] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 20.355791] cfg80211: Calling CRDA to update world regulatory domain
[ 20.379065] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 20.379070] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 20.379162] iwlwifi 0000:05:00.0: pci_resource_len = 0x00002000
[ 20.379165] iwlwifi 0000:05:00.0: pci_resource_base = f8848000
[ 20.379168] iwlwifi 0000:05:00.0: HW Revision ID = 0x0
[ 20.379262] iwlwifi 0000:05:00.0: irq 49 for MSI/MSI-X
[ 20.410678] Linux video capture interface: v2.00
[ 20.413069] ppdev: user-space parallel port driver
[ 20.423124] Bluetooth: Core ver 2.16
[ 20.423150] NET: Registered protocol family 31
[ 20.423152] Bluetooth: HCI device and connection manager initialized
[ 20.423154] Bluetooth: HCI socket layer initialized
[ 20.423157] Bluetooth: L2CAP socket layer initialized
[ 20.423162] Bluetooth: SCO socket layer initialized
[ 20.432787] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.432792] Bluetooth: BNEP filters: protocol multicast
[ 20.433376] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4810)
[ 20.433439] Bluetooth: RFCOMM TTY layer initialized
[ 20.433443] Bluetooth: RFCOMM socket layer initialized
[ 20.433445] Bluetooth: RFCOMM ver 1.11
[ 20.444368] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input7
[ 20.444454] usbcore: registered new interface driver uvcvideo
[ 20.444457] USB Video Class driver (1.1.1)
[ 20.469333] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 20.472207] type=1400 audit(1366534441.345:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=717 comm="apparmor_parser"
[ 20.473456] type=1400 audit(1366534441.345:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=722 comm="apparmor_parser"
[ 20.473937] type=1400 audit(1366534441.345:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=722 comm="apparmor_parser"
[ 20.474212] type=1400 audit(1366534441.345:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=722 comm="apparmor_parser"
[ 20.475195] type=1400 audit(1366534441.345:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=717 comm="apparmor_parser"
[ 20.549275] device-mapper: multipath: version 1.4.0 loaded
[ 20.686324] init: failsafe main process (813) killed by TERM signal
[ 20.798567] type=1400 audit(1366534441.669:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=925 comm="apparmor_parser"
[ 20.798987] type=1400 audit(1366534441.669:
: apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=925 comm="apparmor_parser"
[ 20.816318] type=1400 audit(1366534441.689:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=924 comm="apparmor_parser"
[ 20.816722] type=1400 audit(1366534441.689:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=924 comm="apparmor_parser"
[ 20.822219] type=1400 audit(1366534441.693:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=938 comm="apparmor_parser"
[ 20.903842] cfg80211: World regulatory domain updated:
[ 20.903847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.903850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.903853] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.903856] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.903858] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.903861] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.920549] iwlwifi 0000:05:00.0: loaded firmware version 8.83.5.1 build 33692
[ 20.920812] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 20.920815] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 20.920818] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 20.920821] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 20.920824] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_P2P disabled
[ 20.920827] iwlwifi 0000:05:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 20.920895] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[ 20.923920] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio.
[ 20.928191] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 20.932736] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 20.943262] iwlwifi 0000:05:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 20.943267] iwlwifi 0000:05:00.0: Device SKU: 0xF0
[ 20.943270] iwlwifi 0000:05:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3
[ 20.943287] iwlwifi 0000:05:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 20.943386] Registered led device: phy0-led
[ 20.943417] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 20.958693] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 20.986467] fbcon: inteldrmfb (fb0) is primary device
[ 20.987820] Console: switching to colour frame buffer device 170x48
[ 20.987860] fb0: inteldrmfb frame buffer device
[ 20.987863] drm: registered panic notifier
[ 21.031736] r8169 0000:08:00.0: eth0: link down
[ 21.031963] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.032335] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.035928] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 21.047180] acpi device:06: registered as cooling_device2
[ 21.047268] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.048413] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 21.050873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.051033] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 21.122125] usb 8-1: New USB device found, idVendor=0a5c, idProduct=217f
[ 21.122131] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 21.122134] usb 8-1: Product: Broadcom Bluetooth Device
[ 21.122137] usb 8-1: Manufacturer: Broadcom Corp
[ 21.122140] usb 8-1: SerialNumber: 904CE5E3B34A
[ 21.140240] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[ 21.143300] iwlwifi 0000:05:00.0: Radio type=0x1-0x2-0x0
[ 21.233578] usbcore: registered new interface driver btusb
[ 21.240256] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.240495] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.244324] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.245099] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 21.245114] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.245117] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 21.245121] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 21.245126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.245130] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 21.245135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.245137] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 21.269961] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[ 21.273157] iwlwifi 0000:05:00.0: Radio type=0x1-0x2-0x0
[ 21.326327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.328530] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.385564] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
[ 21.385574] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 21.405998] init: kdm main process (1119) killed by TERM signal
[ 21.429769] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 21.481810] init: lightdm main process (1255) killed by TERM signal
[ 28.220427] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 28.463801] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input13
[ 31.298355] wlan0: authenticate with cc:b2:55:2b:d1:3e
[ 31.301944] wlan0: send auth to cc:b2:55:2b:d1:3e (try 1/3)
[ 31.303776] wlan0: authenticated
[ 31.304033] wlan0: associate with cc:b2:55:2b:d1:3e (try 1/3)
[ 31.307413] wlan0: RX AssocResp from cc:b2:55:2b:d1:3e (capab=0x411 status=0 aid=2)
[ 31.309004] wlan0: associated
[ 31.309193] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 37.712159] ata2.00: exception Emask 0x50 SAct 0x0 SErr 0x880800 action 0x6 frozen
[ 37.712164] ata2.00: irq_stat 0x08000000, interface fatal error
[ 37.712168] ata2: SError: { HostInt 10B8B LinkSeq }
[ 37.712173] sr 1:0:0:0: CDB:
[ 37.712176] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 37.712191] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 37.712191] res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x50 (ATA bus error)
[ 37.712195] ata2.00: status: { DRDY }
[ 37.712201] ata2: hard resetting link
[ 38.116080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 43.116058] ata2.00: qc timeout (cmd 0xa1)
[ 43.116070] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 43.116073] ata2.00: revalidation failed (errno=-5)
[ 43.116079] ata2: hard resetting link
[ 43.436078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 43.440323] ata2.00: unexpected _GTF length (
[ 43.445124] ata2.00: unexpected _GTF length (
[ 43.445133] ata2.00: configured for UDMA/133
[ 43.460064] ata2: EH complete
[ 83.232074] usb 8-1: USB disconnect, device number 2
[ 151.840213] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 151.840231] sr 1:0:0:0: CDB:
[ 151.840237] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 151.840277] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 151.840277] res 40/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 151.840287] ata2.00: status: { DRDY }
[ 151.840299] ata2: hard resetting link
[ 152.160215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 152.164628] ata2.00: unexpected _GTF length (
[ 152.169420] ata2.00: unexpected _GTF length (
[ 152.169436] ata2.00: configured for UDMA/133
[ 152.184253] ata2: EH complete
[ 169.746956] ata2.00: exception Emask 0x50 SAct 0x0 SErr 0x880800 action 0x6 frozen
[ 169.746965] ata2.00: irq_stat 0x08000000, interface fatal error
[ 169.746971] ata2: SError: { HostInt 10B8B LinkSeq }
[ 169.746979] sr 1:0:0:0: CDB:
[ 169.746983] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 169.747008] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 169.747008] res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x50 (ATA bus error)
[ 169.747014] ata2.00: status: { DRDY }
[ 169.747023] ata2: hard resetting link
[ 170.064112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 170.068520] ata2.00: unexpected _GTF length (
[ 170.073269] ata2.00: unexpected _GTF length (
[ 170.073283] ata2.00: configured for UDMA/133
[ 170.088202] ata2: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4
[ 170.088213] ata2: irq_stat 0x40000001
[ 170.088222] ata2: SError: { HostInt 10B8B }
[ 170.088235] ata2: hard resetting link
[ 170.408223] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 170.412620] ata2.00: unexpected _GTF length (
[ 170.417510] ata2.00: unexpected _GTF length (
[ 170.417528] ata2.00: configured for UDMA/133
[ 170.436247] ata2: EH complete
[ 219.844083] ata2: limiting SATA link speed to 1.5 Gbps
[ 219.844098] ata2.00: exception Emask 0x50 SAct 0x0 SErr 0x880800 action 0x6 frozen
[ 219.844107] ata2.00: irq_stat 0x08000000, interface fatal error
[ 219.844117] ata2: SError: { HostInt 10B8B LinkSeq }
[ 219.844129] sr 1:0:0:0: CDB:
[ 219.844134] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 219.844171] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 219.844171] res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x50 (ATA bus error)
[ 219.844181] ata2.00: status: { DRDY }
[ 219.844193] ata2: hard resetting link
[ 220.164098] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 225.164094] ata2.00: qc timeout (cmd 0xa1)
[ 225.164110] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 225.164115] ata2.00: revalidation failed (errno=-5)
[ 225.164125] ata2: hard resetting link
[ 230.524189] ata2: link is slow to respond, please be patient (ready=0)
[ 235.172199] ata2: COMRESET failed (errno=-16)
[ 235.172217] ata2: hard resetting link
[ 237.388088] ata2: SATA link down (SStatus 1 SControl 310)
[ 237.388769] ata2: hard resetting link
[ 244.116195] ata2: link is slow to respond, please be patient (ready=0)
[ 247.420156] ata2: COMRESET failed (errno=-16)
[ 247.420176] ata2: hard resetting link
[ 247.740085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 248.286154] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 248.286165] ata2.00: revalidation failed (errno=-5)
[ 248.286174] ata2.00: disabled
[ 248.300119] ata2: exception Emask 0x50 SAct 0x0 SErr 0x880800 action 0x6 frozen t4
[ 248.300133] ata2: irq_stat 0x08000000, interface fatal error
[ 248.300146] ata2: SError: { HostInt 10B8B LinkSeq }
[ 248.300160] ata2: hard resetting link
[ 250.516211] ata2: SATA link down (SStatus 1 SControl 310)
[ 250.532170] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3
[ 250.532186] ata2: irq_stat 0x00000040, connection status changed
[ 250.532195] ata2: SError: { CommWake DevExch }
[ 250.532212] ata2: hard resetting link
[ 252.760214] ata2: SATA link down (SStatus 1 SControl 300)
[ 252.776105] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t2
[ 252.776116] ata2: irq_stat 0x00000040, connection status changed
[ 252.776124] ata2: SError: { CommWake DevExch }
[ 252.776141] ata2: hard resetting link
[ 255.004193] ata2: SATA link down (SStatus 1 SControl 300)
[ 255.020189] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t1
[ 255.020201] ata2: irq_stat 0x00000040, connection status changed
[ 255.020210] ata2: SError: { CommWake DevExch }
[ 255.020226] ata2: limiting SATA link speed to 1.5 Gbps
[ 255.020234] ata2: hard resetting link
[ 257.248229] ata2: SATA link down (SStatus 1 SControl 310)
[ 257.264191] ata2: EH pending after 5 tries, giving up
[ 257.264231] ata2: EH complete
[ 257.264260] ata2.00: detaching (SCSI 1:0:0:0)
[ 257.266086] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 257.266098] ata2: irq_stat 0x00000040, connection status changed
[ 257.266106] ata2: SError: { CommWake DevExch }
[ 257.266123] ata2: limiting SATA link speed to 1.5 Gbps
[ 257.266131] ata2: hard resetting link
[ 259.492217] ata2: SATA link down (SStatus 1 SControl 310)
[ 259.508223] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
[ 259.508235] ata2: irq_stat 0x00000040, connection status changed
[ 259.508244] ata2: SError: { CommWake DevExch }
[ 259.508259] ata2: limiting SATA link speed to 1.5 Gbps
[ 259.508268] ata2: hard resetting link
[ 261.736146] ata2: SATA link down (SStatus 1 SControl 310)
[ 261.752102] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t3
[ 261.752114] ata2: irq_stat 0x00000040, connection status changed
[ 261.752123] ata2: SError: { CommWake DevExch }
[ 261.752138] ata2: limiting SATA link speed to 1.5 Gbps
[ 261.752151] ata2: hard resetting link
[ 263.980222] ata2: SATA link down (SStatus 1 SControl 310)
[ 263.996141] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t2
[ 263.996153] ata2: irq_stat 0x00000040, connection status changed
[ 263.996163] ata2: SError: { CommWake DevExch }
[ 263.996178] ata2: limiting SATA link speed to 1.5 Gbps
[ 263.996187] ata2: hard resetting link
[ 266.224231] ata2: SATA link down (SStatus 1 SControl 310)
[ 266.240071] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t1
[ 266.240083] ata2: irq_stat 0x00000040, connection status changed
[ 266.240092] ata2: SError: { CommWake DevExch }
[ 266.240108] ata2: limiting SATA link speed to 1.5 Gbps
[ 266.240117] ata2: hard resetting link
[ 268.468221] ata2: SATA link down (SStatus 1 SControl 310)
[ 268.484213] ata2: EH pending after 5 tries, giving up
[ 268.484225] ata2: EH complete
[ 1664.101522] hda-intel: spurious response 0x0:0x0, last cmd=0x324011
[ 1664.364103] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.400781] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.439305] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.476005] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.522197] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.554829] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.592816] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.632453] hda-intel: spurious response 0x0:0x0, last cmd=0x1439000
[ 1664.670248] hda-intel: spurious response 0x0:0x0, last cmd=0x339009
[ 1664.706877] hda-intel: spurious response 0x0:0x0, last cmd=0x339013
[ 1664.745467] hda-intel: spurious response 0x0:0x0, last cmd=0x33901b
[ 1664.782116] hda-intel: spurious response 0x0:0x0, last cmd=0x339021
[ 1664.820049] hda-intel: spurious response 0x0:0x0, last cmd=0x339021
[ 1665.371202] hda-intel: spurious response 0x0:0x0, last cmd=0x339030
[ 3140.096883] hda-intel: spurious response 0x0:0x0, last cmd=0x33902d
[ 3140.441261] hda-intel: spurious response 0x0:0x0, last cmd=0x339030
[ 4181.963676] hda-intel: spurious response 0x0:0x0, last cmd=0x339033
[ 4182.503271] hda-intel: spurious response 0x0:0x0, last cmd=0x339030
[ 4733.906652] hda-intel: spurious response 0x0:0x0, last cmd=0x33902d
[ 5157.926014] hda-intel: spurious response 0x0:0x0, last cmd=0x339030
Тема: Ubuntu не видит DVD-диски (Прочитано 16519 раз)
