[Wiki] [HOWTO] Уcтановка драйверов nVidia

[ipolozov]

млин, 86 страниц
неужели не понятно, что дрова  нифига не работают
прочитал тему всю
https://forum.ubuntu.ru/index.php?topic=39149.0
бред сумашедшего

если кто-то разберется, сообщите пожайлуста

[KingDK]

Поставил из репов 180.11 все работает без проблем, вот только логотип nVidia достал меня. Хотя в xorg.conf все впорядке Option "NoLogo" "True"  где искать не пойму может кто сталкивался с этим.

[Saha]

А ты туда эту опцию запихал? что пишет Xorg.0.log по поводу этой опции?

P.S. И кстати, 180.11 случаем не бета?

[Sawa]

На первой страничке я не понял вот это:

Итак модуль должен быть только один! поэтому нужно отклучить модуль из пакета linux-restricted-modules
делается это изменением файла
/etc/default/linux-restricted-modules-common
там нужно исправить строчку на вот такую
DISABLED_MODULES="nvidia nvidia_legacy nvidia_new"
DISABLED_MODULES="nv nvidia_new"

Что-то здесь не верно.

[Rzarecta]

вот слежу я за этой веткой и удивляюсь людям, натыкаются на одни и те же грабли, все как один, и читать совершенно не хотят - печально 

[KingDK]

А ты туда эту опцию запихал? что пишет Xorg.0.log по поводу этой опции?

P.S. И кстати, 180.11 случаем не бета?

Опция запихана в Section "Screen"
180.11 в репах был оттуда поставил, работает лучше чем 177.82  во всяком случае нету бага с компизом .Насчет Xorg.0.log вечером отпишу, сейчас на работе.

[Saha]

Попробуй поставить ее рядом с Driver "nvidia" в секции Device

[KingDK]

Попробуй поставить ее рядом с Driver "nvidia" в секции Device

(Нажмите, чтобы показать/скрыть)

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Mon Nov  3 08:46:46 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "QDS"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    Option         "NoLogo" "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 7400"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1440x900_60 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Вот так сделал, но результата никакого логотип все равно виден при загрузке

[Saha]

молодец! =)
Ты запихал его в тот Device, который не используется 
Смотри - ловкость рук и никакого мошенства!
Смотрим, что пишут в ServerLayout: "Screen0"
Значит, будут использоваться настройки для screen с идентификатором Screen0.
Ищем эту секцию, в ней прописано:     Device         "Device0"
Значит, будет использоваться девайс с идентификатором "Device0".
Ищем такой девайс и прописываем туда строчку.

Код: [Выделить]

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 7400"
    Option         "NoLogo" "True"
EndSection

[KingDK]

молодец! =)
Ты запихал его в тот Device, который не используется 
Смотри - ловкость рук и никакого мошенства!
Смотрим, что пишут в ServerLayout: "Screen0"
Значит, будут использоваться настройки для screen с идентификатором Screen0.
Ищем эту секцию, в ней прописано:     Device         "Device0"
Значит, будет использоваться девайс с идентификатором "Device0".
Ищем такой девайс и прописываем туда строчку.

Код: [Выделить]

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 7400"
    Option         "NoLogo" "True"
EndSection

Спасибо большое за помощь. Все работает на Ура!!!!

[ossav]

Подскажите в чем может быть проблема. Монитор работает только в 1024*768*60 и ниже. 
Xorg.0.log и xorg.conf прикладываю.

(Нажмите, чтобы показать/скрыть)

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.5.99.902 (1.6.0 RC 2)
Release Date: 2009-1-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu
Current Operating System: Linux vasso-desktop 2.6.28-6-generic #17-Ubuntu SMP Fri Jan 30 15:35:08 UTC 2009 x86_64
Build Date: 31 January 2009  10:48:22AM
xorg-server 2:1.5.99.902-0ubuntu1 (buildd@crested.buildd)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb  5 06:41:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00004000/128
(--) PCI: (0@5:2:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0x93001000/4096
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.27  Tue Jan 27 12:43:19 PST 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  180.27  Tue Jan 27 12:23:08 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.5.99.902, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) NVIDIA(0): Creating default Display subsection in Screen section
   "Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.94.38.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0:
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0):     from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device BTC USB Multimedia Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.5.99.901, module version = 2.1.1
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) BTC USB Multimedia Keyboard: always reports core events
(**) BTC USB Multimedia Keyboard: Device: "/dev/input/event4"
(II) BTC USB Multimedia Keyboard: Found keys
(II) BTC USB Multimedia Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) BTC USB Multimedia Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) BTC USB Multimedia Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) BTC USB Multimedia Keyboard: xkb_layout: "us"
(**) Option "xkb_variant" "alt-intl"
(**) BTC USB Multimedia Keyboard: xkb_variant: "alt-intl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) BTC USB Multimedia Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device bttv IR (card=41)
(**) bttv IR (card=41): always reports core events
(**) bttv IR (card=41): Device: "/dev/input/event8"
(II) bttv IR (card=41): Found keys
(II) bttv IR (card=41): Configuring as keyboard
(II) XINPUT: Adding extended input device "bttv IR (card=41)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) bttv IR (card=41): xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) bttv IR (card=41): xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) bttv IR (card=41): xkb_layout: "us"
(**) Option "xkb_variant" "alt-intl"
(**) bttv IR (card=41): xkb_variant: "alt-intl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) bttv IR (card=41): xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device BTC USB Multimedia Keyboard
(**) BTC USB Multimedia Keyboard: always reports core events
(**) BTC USB Multimedia Keyboard: Device: "/dev/input/event6"
(II) BTC USB Multimedia Keyboard: Found keys
(II) BTC USB Multimedia Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) BTC USB Multimedia Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) BTC USB Multimedia Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) BTC USB Multimedia Keyboard: xkb_layout: "us"
(**) Option "xkb_variant" "alt-intl"
(**) BTC USB Multimedia Keyboard: xkb_variant: "alt-intl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) BTC USB Multimedia Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Optical Mouse
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event3"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Optical Mouse: (accel) set acceleration profile 0
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) bttv IR (card=41): Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Optical Mouse: Close
(II) UnloadModule: "evdev"
 ddxSigGiveUp: Closing log

(Нажмите, чтобы показать/скрыть)

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
   Identifier   "Configured Monitor"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Monitor      "Configured Monitor"
   Device      "Configured Video Device"
   DefaultDepth   24
EndSection

Section "Module"
   Load   "glx"
EndSection

Section "Device"
   Identifier   "Configured Video Device"
   Driver   "nvidia"
   Option   "NoLogo"   "True"
EndSection

[Saha]

2 ossav
посмотри утилитку nvidia-settings
и здесь https://forum.ubuntu.ru/index.php?topic=37307.0
Еще по форуму часто обсуждалась эта проблема.

[ossav]

2 ossav
посмотри утилитку nvidia-settings
и здесь https://forum.ubuntu.ru/index.php?topic=37307.0
Еще по форуму часто обсуждалась эта проблема.

Эта утилитка не видит разрешение более чем 1360*768*60!!!

[Rzarecta]

ossav почитай здесь https://forum.ubuntu.ru/index.php?topic=42543.msg310606#msg310606
и здесь https://forum.ubuntu.ru/index.php?topic=41149.0

читать полностью!

[uvlad]

Видео карта NVIDIA FX5200

Установить драйвера средствами которые описаны в первом посте не получилось, а жаль. При установке вылетает ошибка

Unable to build the NVIDIA kernel module

приложил лог может кто посмотрит и подскажет, что можно сделать т.к. сам решение проблемы не нашел.

Поэтому пришлось установить драйвер стандартными средствами через Hardware Drivers, после чего через NVIDIA X Server Settings настроил разрешение и герцы и все сохранил почти в пустой xorg.conf.

Впринципи проблем нету, но хочется уметь не только кликаньем мышки устанавливать драйвер, а так как еще новичек в Linux, самому все проблемы решить не получается и поиск по интернету ничего хорошо не дал.